Production and Industrial Facilities - INSPIRE - Europa

More documents

Recommendations

Info

INSPIRE Reference: D2.8.III.8_v2.0(.0) TWG-PF Data Specification on Production and Industrial Facilities Annex A (normative) Abstract Test Suite 2011-06-15 Page XC Any dataset conforming to this INSPIRE data specification shall meet all requirements specified in this document. Open issue 6: Conformance testing is still an open issue under discussion. Instructions on conformance testing and a common abstract test suite (including detailed instructions on how to test specific requirements) will be added at a later stage.
INSPIRE Reference: D2.8.III.8_v2.0(.0) TWG-PF Data Specification on Production and Industrial Facilities Annex B (informative) Use Cases 2011-06-15 Page XCI This annex describes the use cases that were used as a basis for the development of this data specification. NOTE: AS OF VERSION 2 THIS ANNEX INCLUDES TWO DRAFT USE CASES, RELATED TO SEVESO DIRECTIVE AND TO LICENSING FOR PRODUCTION/INDUSTRIAL FACILITIES. THE LAYOUT OF THESE USE CASES NEEDS TO BE FINALISED AND WILL BE AVAILABLE PRIOR TO THE RELEASE OF VERSION 3 OF THE DATA SPECIFICATION B.1 Use Case: Industrial risk mapping (Seveso Directive) 2 Introduction Developing Use-Cases is a powerful method for creating information products, which has been adopted for INSPIRE data specification process. The INSPIRE Methodology for Data Specification Development (D2.6) foresees a user-driven specification method based on use-case development. This approach has been followed during the development of the Annex I Data themes and is now followed by the Annex II and III Thematic Working Groups (TWGs). Development of common Use-Cases would not only show possible inter-linkages and dependencies among INSPIRE Data themes, also serve as a real demonstrator of the interoperability of the INSPIRE data specifications. This document is focused on planning and monitoring actions related to application of the Directive 96/82/EC (Seveso II), and the amending Directive 2003/105/EC (Seveso III), which aim is to prevent major accidents that involve dangerous substances and to limit their consequences for people and the environment. The Seveso Directives applies to establishments (industrial plants) at which certain dangerous substances are present in sufficiently large quantities to create a major accident hazard. As well as requiring the operators of such establishments to take preventive measures the Directives places a number of procedural requirements on Member States relating to planning, policy integration, inspection, reporting and public access to information. 3 Users Diagram Operator: − redacts Safety Report − defines Prevention Policy of Major Accidents − redacts Internal Emergency Plan − arranges Personell Training − arranges Industrial Emergency Simulation Public authority: - examines Safety Report - monitors operator's SMS through periodic inspections - plans Territorial Control and Urbanization - redacts External Emergency Plan
Page 1 and 2:
INSPIRE Infrastructure for Spatial
Page 3 and 4:
INSPIRE Reference: D2.8.III.8_v2.0(
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40: INSPIRE Reference: D2.8.III.8_v2.0(
Page 89: INSPIRE Reference: D2.8.III.8_v2.0(
Page 105 and 106: E D INSPIRE Reference: D2.8.III.8_v
show all

Production and Industrial Facilities - INSPIRE - Europa

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?