to download the new 2011 Syringe Pump Catalog - Harvard ...

More documents

Recommendations

Info

Microprocessor Controlled Pumps with or without Dispensing PC1 73-3132 KEY FEATURES Extremely low pulsation Figure A Highest Accuracy Very high repeatability on all channels Lacquered stainless steel housing for long life Available with 4, 8, 12, 16 or 24 channels Flow rate and dispensing volume (dispensing models only) can be calibrated CA click ‘n’ go cassettes provide defined and repeatable occlusion conditions Cassettes are included RS-232 interface for PC control – dispensing models only APPLICATIONS Perfusion of animal tissue slices Toxicological in-vitro use Flow injection analyzers Low-flow, multi-channel fluid transfer and dosing or filling applications These tubing pumps are ideal for a wide variety of applications including perfusion of animal tissue slices and in-vitro toxicological procedures. They are available in a variety of channel configurations and have two flow rate ranges. Each pump is also available in two models. Select from a pump with or without a dispensing function. These pumps feature a unique planetary drive system where the sun wheel drives each roller directly (see Figure A). This prevents axial push-pull friction on the tubing which results in increased service-life of the tubing, lower pulsation and high repeatability. Microprocessor Controlled Pumps Specifications OPERATING MODES: IPC With Dispensing 11 operating modes and calibrating functions IP Without Dispensing Run/Stop, Speed Control and Direction only, no dispensing features or calibrating functions FLOW RATES (PER CHANNEL): IPC With Dispensing 0.0004 to 11 ml/min IP Without Dispensing 0.002 to 44 ml/min CHANNELS 4, 8, 12, 16 or 24 ROLLERS 8 OPERATING PANEL: 6-BUTTON MEMBRANE KEY-PAD WITH LED DISPLAY IPC With Dispensing Various operating modes for dosing applications IP Without Dispensing 2 LEDs indicating LOCAL or REMOTE operation SPEED SETTING: IPC With Dispensing 1-100%, resolution 0.1% (rpm) or in µl/min or ml/min (flow rate) IP Without Dispensing 1-100%, resolution 0.1% rpm, resolution 0.1 rpm, resolution 0.03 rpm SPEED CONTROL Closed loop control for load independent speed REMOTE CONTROL IPC With Dispensing RS-232 “in” and “out” Digital inputs (TTL level) Analog input for speed control Analog output for speed monitoring IP Without Dispensing Analog interface (no RS-232) MicroprocessorControlled Pumps with or without Dispensing Flow Rates 2-STOP TUBING IP AND IPC PUMPS FLOW RATES ML/MIN PER CHANNEL IP-N AND IPC-N PUMPS FLOW RATES ML/MIN PER CHANNEL ENE# ID MM Min. Max. Min. Max. 00 0.13 0.002 0.15 0.0004 0.039 02 0.25 0.005 0.41 0.001 0.10 05 0.51 0.015 1.5 0.004 0.38 08 0.76 0.032 3.2 0.009 0.81 11 1.02 0.057 5.7 0.014 1.4 14 1.22 0.079 7.9 0.020 2.0 17 1.52 0.12 12 0.030 3.0 20 1.85 0.17 17 0.043 4.3 23 2.54 0.30 30 0.075 7.5 25 3.17 0.44 44 0.11 11 *Note: Approximate values: determined with water at 22˚C, no differential pressure, with Tygon ® Tubing Harvard Apparatus phone 508.893.8999 toll free U.S. 800.272.2775 fax 508.429.5732 www.harvardapparatus.com 55
Microprocessor Controlled Pumps with or without Dispensing (continued) Microprocessor Controlled Tubing Pumps Order # # Channels Flow Rate Range Dimensions H x W x D Weight Voltage IPC Pumps With Dispensing Channels PC1 73-3129 4 0.002 to 44 ml/min 130 x 175 x 180 mm 4.6 kg 230 VAC PC1 73-3130 4 0.002 to 44 ml/min 130 x 175 x 180 mm 4.6 kg 115 VAC PC1 73-3131 8 0.002 to 44 ml/min 130 x 175 x 220 mm 5.1 kg 230 VAC PC1 73-3132 8 0.002 to 44 ml/min 130 x 175 x 220 mm 5.1 kg 115 VAC PC1 73-3133 12 0.002 to 44 ml/min 130 x 175 x 260 mm 5.8 kg 230 VAC PC1 73-3134 12 0.002 to 44 ml/min 130 x 175 x 260 mm 5.8 kg 115 VAC PC1 73-2450 16 0.002 to 44 ml/min 130 x 175 x 300 mm 6.5 kg 230 VAC PC1 73-3135 16 0.002 to 44 ml/min 130 x 175 x 300 mm 6.5 kg 115 VAC PC1 73-3136 24 0.002 to 44 ml/min 130 x 175 x 380 mm 7.9 kg 230 VAC PC1 73-3137 24 0.002 to 44 ml/min 130 x 175 x 380 mm 7.9 kg 115 VAC IPC-N Pumps With Dispensing Channels PC1 73-3138 4 0.0004 to 11 ml/min 130 x 175 x 180 mm 4.6 kg 230 VAC PC1 73-3139 4 0.0004 to 11 ml/min 130 x 175 x 180 mm 4.6 kg 115 VAC PC1 73-3140 8 0.0004 to 11 ml/min 130 x 175 x 220 mm 5.1 kg 230 VAC PC1 73-3141 8 0.0004 to 11 ml/min 130 x 175 x 220 mm 5.1 kg 115 VAC PC1 73-2421 12 0.0004 to 11 ml/min 130 x 175 x 260 mm 5.8 kg 230 VAC PC1 73-3142 12 0.0004 to 11 ml/min 130 x 175 x 260 mm 5.8 kg 115 VAC PC1 73-3143 16 0.0004 to 11 ml/min 130 x 175 x 300 mm 6.5 kg 230 VAC PC1 73-3144 16 0.0004 to 11 ml/min 130 x 175 x 300 mm 6.5 kg 115 VAC PC1 73-3145 24 0.0004 to 11 ml/min 130 x 175 x 380 mm 7.9 kg 230 VAC PC1 73-3146 24 0.0004 to 11 ml/min 130 x 175 x 380 mm 7.9 kg 115 VAC IP Pumps Without Dispensing Channels PC1 73-3147 4 0.002 to 44 ml/min 130 x 175 x 180 mm 4.6 kg 230 VAC PC1 73-3148 4 0.002 to 44 ml/min 130 x 175 x 180 mm 4.6 kg 115 VAC PC1 73-3149 8 0.002 to 44 ml/min 130 x 175 x 220 mm 5.1 kg 230 VAC PC1 73-3150 8 0.002 to 44 ml/min 130 x 175 x 220 mm 5.1 kg 115 VAC PC1 73-3151 12 0.002 to 44 ml/min 130 x 175 x 260 mm 5.8 kg 230 VAC PC1 73-3152 12 0.002 to 44 ml/min 130 x 175 x 260 mm 5.8 kg 115 VAC PC1 73-3153 16 0.002 to 44 ml/min 130 x 175 x 300 mm 6.5 kg 230 VAC PC1 73-3154 16 0.002 to 44 ml/min 130 x 175 x 300 mm 6.5 kg 115 VAC PC1 73-3155 24 0.002 to 44 ml/min 130 x 175 x 380 mm 7.9 kg 230 VAC PC1 73-3156 24 0.002 to 44 ml/min 130 x 175 x 380 mm 7.9 kg 115 VAC IP-N Pumps Without Dispensing Channels PC1 73-3157 4 0.0004 to 11 ml/min 130 x 175 x 180 mm 4.6 kg 230 VAC PC1 73-3158 4 0.0004 to 11 ml/min 130 x 175 x 180 mm 4.6 kg 115 VAC PC1 73-3159 8 0.0004 to 11 ml/min 130 x 175 x 220 mm 5.1 k 230VAC PC1 73-3160 8 0.0004 to 11 ml/min 130 x 175 x 220 mm 5.1 kg 115 VAC PC1 73-3161 12 0.0004 to 11 ml/min 130 x 175 x 260 mm 5.8 kg 230 VAC PC1 73-3162 12 0.0004 to 11 ml/min 130 x 175 x 260 mm 5.8 kg 115 VAC PC1 73-3163 16 0.0004 to 11 ml/min 130 x 175 x 300 mm 6.5 kg 230 VAC PC1 73-3164 16 0.0004 to 11 ml/min 130 x 175 x 300 mm 6.5 kg 115 VAC PC1 73-3165 24 0.0004 to 11 ml/min 130 x 175 x 380 mm 7.9 kg 230 VAC PC1 73-3166 24 0.0004 to 11 ml/min 130 x 175 x 380 mm 7.9 kg 115 VAC 56 Harvard Apparatus phone 508.893.8999 toll free U.S. 800.272.2775 fax 508.429.5732 www.harvardapparatus.com
Page 1 and 2:
Harvard Apparatus Pumps legendary p
Page 3 and 4:
Table of Contents Product Syringe P
Page 5 and 6: Choosing the Right Pump for Your Ap
Page 9 and 10: Applications Selection Guide With m
Page 11 and 12: Applications Selection Guide Microf
Page 13 and 14: NEW Pump 11 Elite (continued) Pump
Page 15 and 16: NEW Pump 11 Pico Plus Elite KEY FEA
Page 17 and 18: NEW PHD ULTRA Advanced Syringe Pum
Page 23 and 24: NEW PHD ULTRA HPSI and PHD ULTRA
Page 25 and 26: NEW NanoCool Injector NanoCool Han
Page 27 and 28: Pump 22 and Physio 22 Multiple Syri
Page 29 and 30: PHD 22/2000 MRI Compatible Syringe
Page 31 and 32: PHD 22/2000 Advanced Syringe Pumps
Page 33 and 34: Multiple Animal Feeding System Mult
Page 35 and 36: NEW Model 55 Pump KEY FEATURES Accu
Page 37 and 38: Customized Solutions - OEM and Spec
Page 39 and 40: Customized Solutions - OEM and Spec
Page 41 and 42: NEW FlowControl Software Pump Cont
Page 43 and 44: LabVIEW Driver Take Control Of You
Page 45 and 46: SWS-10, SWS-60 and SWS-140 Syringe
Page 49 and 50: Harvard Apparatus Peristaltic Pump
Page 51 and 52: REGLO Analog Peristaltic Pumps PC1
Page 53 and 54: REGLO Analog and Digital Peristalti
Page 55: Ecoline 4-Channel and 8-Channel Mic
Page 59 and 60: BVP Pump Drive MCP Pump Drive Speci
Page 61 and 62: Pump Head 380AD Single-Channel Pump
Page 63 and 64: CA Pump Heads PC1 73-3031 CA-4 Pump
Page 65 and 66: Tubing Cassettes and Accessories Cl
Page 67 and 68: Pump Tubing 2-Stop Tygon ® Pump Tu
Page 69 and 70: Extension Tubing & Connectors Stand
Page 71 and 72: Centrifugal Pump for Blood Centrifu
Page 73 and 74: Harvard Apparatus Pulsatile Blood P
Page 75 and 76: NEW Series I Piston Pump Saves Benc
Page 77 and 78: NEW Mighty-Mini Piston Pump The Mig
Page 79 and 80: Harvard Apparatus Stainless Steel S
Page 81 and 82: Hamilton Glass Syringes (continued
Page 83 and 84: Hamilton Glass Syringes (continued
Page 85 and 86: Plastic Syringes Super Syringes Sup
Page 87 and 88: Priming Kit, Compression Fittings a
Page 89 and 90: Laboratory Tubing (continued) Tygon
Page 95 and 96: Laboratory Tubing (continued) Kynar
Page 97 and 98: PolyE Polyethylene Tubing Harvard A
Page 99 and 100: CapTite Microfluidic Components On
Page 101 and 102: Barbed Tubing Connectors Luer to Tu
Page 103 and 104: How to Calculate the Pressure Requi
Page 105 and 106: Syringe Pump Pressure and Flow Rate
Page 107 and 108:
Syringe Pump Pressure and Flow Rate
Page 109 and 110:
How to Select the Correct Syringe f
Page 111 and 112:
Pressure Unit Conversion Chart Pres
show all

to download the new 2011 Syringe Pump Catalog - Harvard ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?