to download the new 2011 Syringe Pump Catalog - Harvard ...

More documents

Recommendations

Info

Harvard Apparatus Stainless Steel Syringes Harvard Apparatus High Pressure Stainless Steel Syringes 200 ml 100 ml 50 ml 2.5 ml 20 ml 8 ml All syringes are supplied with inside diameter dimensions for use with Harvard Apparatus microprocessor controlled pumps and rate charts for use with older ‘classic’ pumps. Replacement Viton O-Rings are available, as are the more chemically resistant Perfluoroelastomer O- Rings. High Pressure 2.5 ml and 8 ml Stainless Steel Syringes These syringes have been designed to utilize the high forces available in our syringe pumps to produce pressures up to 7500 psi and 1500 psi respectively. These syringes are constructed entirely of #316 stainless steel. The 2.5 ml stainless steel syringe contains one Perfluoroelastomer O-Ring seal and one Ball seal. This syringe is available with a 1/16 inch SWAGELOK ® tip only. The 8 ml stainless steel syringe contains two Perfluoroelastomer O-Ring seals and two Teflon O-Ring seals. This syringe is available with a 1/16 inch or 1/8 inch SWAGELOK ® tip. Order # Product KEY FEATURES 7500 psi peak pressure (with 2.5 ml syringes) Fits most Harvard Apparatus pumps Electron beam welded Fully autoclavable 1/16 inch SWAGELOK ® fitting for low dead volume High Pressure Stainless Steel Syringes Harvard Apparatus offers a complete line of Stainless Steel Syringes intended for high pressure applications with good resistance to most aggressive liquids. Wetted parts are #316 stainless steel or Viton. Syringes are available in 2.5, 8, 20, 50, 100 and 200 ml sizes with removable, replaceable tips. Genuine SWAGELOK ® syringe to tube fittings are available in 1/16, 1/8 and 1/4 inch sizes. A luer lock end fitting is also available. All tips are interchangeable with all syringes (20 to 200 ml) in the series. Both syringe barrel end plungers are #316 stainless steel. A Viton O- Ring between top and end of the barrel insures against leakage. Syringes are guaranteed to be leak free for pressures up to 750 psi. Replacement Parts PC1 5013-087 Perfluoroelastomer Barrel O-Ring 8 ml PC1 5013-089 Perfluoroelastomer Barrel O-Ring 20 ml PC1 5013-090 Perfluoroelastomer Barrel O-Ring 50 ml PC1 5013-091 Perfluoroelastomer Barrel O-Ring 100 ml PC1 5013-092 Perfluoroelastomer Barrel O-Ring 200 ml PC1 5013-110* Perfluoroelastomer Tip Seal O-Ring 2.5 ml and 8 ml PC1 5013-109 Perfluoroelastomer Tip Seal O-Ring 20 ml to 200 ml PC1 72-2472 Replacement Viton O-Ring 20 ml, pkg. of 10 PC1 72-2473 Replacement Viton O-Ring 50 ml, pkg. of 10 PC1 72-2474 Replacement Viton O-Ring 100 ml, pkg. of 10 PC1 72-2475 Replacement Viton O-Ring 200 ml, pkg. of 10 PC1 72-2616 Replacement Viton Tip Seal O-Ring, 20 ml to 200 ml, pkg. of 20 PC1 70-2271 Replacement Ball Seal for 2.5 ml PC1 5013-088 Replacement Backup Teflon O-Ring, 8 ml PC1 72-2617 Stainless Steel Plunger Button to Adapt Syringe for Use with PHD 22/2000 Hpsi, see page 31 (Required for 50 and 100 ml Syringes Only) *Note: 2.5 ml and 8 ml stainless steel syringes cannot be used with PHD 22/2000 Hpsi Pumps (70-2023 or PHD ULTRA Hpsi) due to overpressure conditions. High Pressure Stainless Steel Syringes With SWAGELOK ® With Luer Lock SYRINGESIZE DIAMETER 1/16 INCH DIAMETER 1/8 INCH DIAMETER 1/4 INCH 2.5 ml PC1 70-2269 N/A N/A N/A 8 ml PC1 70-2267 PC1 70-2268 N/A N/A 20 ml PC1 70-2251 PC1 70-2252 PC1 70-2253 PC1 70-2254 50 ml PC1 70-2255 PC1 70-2256 PC1 70-2257 PC1 70-2258 100 ml PC1 70-2259 PC1 70-2260 PC1 70-2261 PC1 70-2262 200 ml PC1 70-2263 PC1 70-2264 PC1 70-2265 PC1 70-2266 Replacement Tips, Furnished with Sealing O-Ring 2.5 ml PC1 70-2246 N/A N/A N/A 8 ml PC1 70-2246 PC1 70-2245 N/A N/A 20 ml to 200 ml PC1 70-2247 PC1 70-2248 PC1 70-2249 PC1 70-2250 Harvard Apparatus phone 508.893.8999 toll free U.S. 800.272.2775 fax 508.429.5732 www.harvardapparatus.com 77
Harvard Apparatus Stainless Steel Syringes (continued) L1 0.12 [3.1] 0.12 [3.1] S I.D. ID OD O.D. SYRINGE(ML) FITTING L3 (IN) (MM) 2.5 to 8 1/16 0.74 (18.8) 2.5 to 8 1/8 0.91 (23.1) 20 to 200 1/16 0.67 (17.0) 20 to 200 1/8 0.84 (21.3) 20 to 200 1/4 0.94 (23.9) 20 to 200 Luer 1.34 (34.0) L3 L3 Harvard Apparatus Stainless Steel Syringes Specifications VOLUME 2.5ml 8ml 20ml 50ml 100ml 200ml DIMENSIONS in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) OVERALL LENGTH 6.625 (168.3) 6.73 (170.8) 4.73 (120.1) 5.49 (139.3) 6.73 (170.9) 81.48 (215.4) OF BARREL - (L1) PLUNGER EXCURSION - (S) 4.75 (120.6) 4.42 (112.4) 3.56 (90.3) 4.14 (105.2) 5.67 (143.9) 7.20 (182.8) OUTSIDE DIAMETER - (OD) 0.50 (12.7) 0.50 (12.7) 0.88 (22.2) 1.25 (31.8) 1.50 (38.1) 1.88 (47.63) INSIDE DIAMETER - (ID) 0.187 (4.75) 0.375 (9.525) 0.753 (19.13) 1.126 (28.60) 1.374 (34.90) 1.762 (44.75) MAXIMUM TEST PRESSURE 9000 psi 4000 psi 1500 psi 1500 psi 1500 psi 1500 psi WORKING PRESSURE 7000 psi 1500 psi 750 psi 750 psi 750 psi 750 psi 78 Harvard Apparatus phone 508.893.8999 toll free U.S. 800.272.2775 fax 508.429.5732 www.harvardapparatus.com
Page 1 and 2:
Harvard Apparatus Pumps legendary p
Page 3 and 4:
Table of Contents Product Syringe P
Page 5 and 6:
Choosing the Right Pump for Your Ap
Page 7 and 8:
Choosing the Right Pump for Your Ap
Page 9 and 10:
Applications Selection Guide With m
Page 11 and 12:
Applications Selection Guide Microf
Page 13 and 14:
NEW Pump 11 Elite (continued) Pump
Page 15 and 16:
NEW Pump 11 Pico Plus Elite KEY FEA
Page 17 and 18:
NEW PHD ULTRA Advanced Syringe Pum
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
NEW PHD ULTRA HPSI and PHD ULTRA
Page 25 and 26:
NEW NanoCool Injector NanoCool Han
Page 27 and 28: Pump 22 and Physio 22 Multiple Syri
Page 29 and 30: PHD 22/2000 MRI Compatible Syringe
Page 31 and 32: PHD 22/2000 Advanced Syringe Pumps
Page 33 and 34: Multiple Animal Feeding System Mult
Page 35 and 36: NEW Model 55 Pump KEY FEATURES Accu
Page 37 and 38: Customized Solutions - OEM and Spec
Page 39 and 40: Customized Solutions - OEM and Spec
Page 41 and 42: NEW FlowControl Software Pump Cont
Page 43 and 44: LabVIEW Driver Take Control Of You
Page 45 and 46: SWS-10, SWS-60 and SWS-140 Syringe
Page 47 and 48: Choosing the Right Pump for Your Ap
Page 49 and 50: Harvard Apparatus Peristaltic Pump
Page 51 and 52: REGLO Analog Peristaltic Pumps PC1
Page 53 and 54: REGLO Analog and Digital Peristalti
Page 55 and 56: Ecoline 4-Channel and 8-Channel Mic
Page 57 and 58: Microprocessor Controlled Pumps wit
Page 59 and 60: BVP Pump Drive MCP Pump Drive Speci
Page 61 and 62: Pump Head 380AD Single-Channel Pump
Page 63 and 64: CA Pump Heads PC1 73-3031 CA-4 Pump
Page 65 and 66: Tubing Cassettes and Accessories Cl
Page 67 and 68: Pump Tubing 2-Stop Tygon ® Pump Tu
Page 69 and 70: Extension Tubing & Connectors Stand
Page 71 and 72: Centrifugal Pump for Blood Centrifu
Page 73 and 74: Harvard Apparatus Pulsatile Blood P
Page 75 and 76: NEW Series I Piston Pump Saves Benc
Page 77: NEW Mighty-Mini Piston Pump The Mig
Page 81 and 82: Hamilton Glass Syringes (continued
Page 83 and 84: Hamilton Glass Syringes (continued
Page 85 and 86: Plastic Syringes Super Syringes Sup
Page 87 and 88: Priming Kit, Compression Fittings a
Page 89 and 90: Laboratory Tubing (continued) Tygon
Page 95 and 96: Laboratory Tubing (continued) Kynar
Page 97 and 98: PolyE Polyethylene Tubing Harvard A
Page 99 and 100: CapTite Microfluidic Components On
Page 101 and 102: Barbed Tubing Connectors Luer to Tu
Page 103 and 104: How to Calculate the Pressure Requi
Page 105 and 106: Syringe Pump Pressure and Flow Rate
Page 107 and 108: Syringe Pump Pressure and Flow Rate
Page 109 and 110: How to Select the Correct Syringe f
Page 111 and 112: Pressure Unit Conversion Chart Pres
show all

to download the new 2011 Syringe Pump Catalog - Harvard ...

Create successful ePaper yourself

Delete template?

Save as template?