to download the new 2011 Syringe Pump Catalog - Harvard ...

NEW Series I Piston Pump
Saves Bench Space
The Series I requires only 8 x 14.5 in deep of valuable bench space.
Choice of Materials
The choice of Stainless Steel or PEEK fluid paths make the Series I
ideal for pumping solutions as diverse as distilled water, organic
solvents, or radioactive slurries.
Positive Seal-Washing Standard
The exclusive self-flush head extends seal life dramatically by
removing salts and wetting the seal.
Easy Maintenance
The completely disposable head assembly can be changed in
seconds at the price similar to seals and check valves in most
pumps.
KEY FEATURES
Compact and Economical
High Performing
Versatile
Self-flushing Pump Head
Stainless Steel or PEEK Fluid Path
Simple Keypad Controls with LED Display
(0.1 ml increments)
Single Piston with Electronic Rapid Refill Mechanism
Motor Stall Detector
RS-232 Serial Com Port for Control & Status Monitoring
The Series I Isocratic Pump is ideal for Chromatography or General
Metering Applications. This high performance, low cost pump uses
new manufacturing techniques and proven fluidics to give the
highest performance at the lowest cost.
Wide Flow Range
The Series I operates from 0.01 ml/min. to 10 ml/min. at pressure
ratings up to 2500 psi; or from 0.1 to 40 ml/min. (650 psi), allowing
both analytical and small-scale preparative applications.
Flexible Advanced Control
The Series I is RS-232C control-compatible and operates with simple
commands from any terminal or computer program.
The Best Performance Per Money Spent
The Series I represents a class of HPLC pumps for use in critical
metering applications and all isocratic HPLC applications where
pressure above 2500 psi is not required.
Order #
PC1 72-9475
PC1 72-9476
PC1 72-9477
PC1 72-9478
PC1 72-9479
PC1 72-9480
PC1 72-9481
PC1 72-9482
Product
Series I Pump, 10 ml, PEEK
Series I Pump, 10 ml, Stainless Steel
Series I Pump, 40 ml, PEEK
Series I Pump, 40 ml, Stainless Steel
Series I Pump, 10 ml, with Pressure Monitoring
& Voltage Control, PEEK
Series I Pump, 10 ml, with Pressure Monitoring
& Voltage Control, Stainless Steel
Series I Pump, 40 ml, with Voltage Control, PEEK
Series I Pump, 40 ml, with Voltage Control, Stainless Steel
Series I Piston Pump Specifications
MATERIAL:
PEEK & Inert Polymers PC1 72-9475 PC1 72-9477 PC1 72-9479 PC1 72-9481
Stainless Steel PC1 72-9476 PC1 72-9478 PC1 72-9480 PC1 72-9482
FLOW RATE 0.01-10.0 ml/min 0.01-40.0 ml/min 0.01-10.0 ml/min 0.01-40.0 ml/min
MAX. PRESSURE 2500 psi 750 psi 3000 psi 900 psi
FLOW ACCURACY ± 2% ± 5% at midpoint of flow ± 2% ± 5% at midpoint of flow
FLOW PRECISION 0.5% RSD 0.5% RSD 0.5% RSD 0.5% RSD
REMOTE CONTROL RS-232 & Run/Stop RS-232 & Run/Stop RS-232 & Run/Stop RS-232 & Run/Stop
POWER 120/230 VAC 50/60 Hz 120/230 VAC 50/60 Hz 120/230 VAC 50/60 Hz 120/230 VAC 50/60 Hz
DIMENSIONS, H x W xD
16.0 x 19.8 x 36.1 cm
(6.3 x 7.8 x 14.2 in)
16.0 x 19.8 x 36.1 cm
(6.3 x 7.8 x 14.2 in)
16.0 x 19.8 x 36.1 cm
(6.3 x 7.8 x 14.2 in)
16.0 x 19.8 x 36.1 cm
(6.3 x 7.8 x 14.2 in)
74 Harvard Apparatus phone 508.893.8999 toll free U.S. 800.272.2775 fax 508.429.5732 www.harvardapparatus.com