Operation and Service Guide Agilent Technologies 8648A/B/C/D ...
Operation and Service Guide Agilent Technologies 8648A/B/C/D ...
Operation and Service Guide Agilent Technologies 8648A/B/C/D ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Operation</strong> Examples<br />
Using the Memory Registers<br />
Using the Memory Registers<br />
The memory register examples show you how to crate a sequence of registers, delete a<br />
register from that sequence, renumber the registers in the sequence, <strong>and</strong> insert a new<br />
register in the sequence.<br />
Up to 10 register sequences can be defined (0 through 9). A sequence can contain up to 100<br />
registers (00 through 99). There are a total of 300 registers available in the instrument.<br />
The registers can be used in the sequences in any combination 9such as 10 sequences of 30<br />
registers each, or 3 sequences of 100 registers each) as long as the total does not exceed<br />
300 registers. It is not possible to have all 10 sequences each contain 100 registers as that<br />
would be 1000 registers. (If Option 1EP is present, there are a total of 70 registers<br />
available.)<br />
,........ FREQUENCY<br />
I<br />
/<br />
!<br />
I<br />
/--~<br />
/\<br />
"<br />
\<br />
M<br />
l;Y /;<br />
, "-7<br />
I<br />
SEQ 0<br />
[]<br />
\<br />
,........l1li FREQUENCY__ MODULATION _AMPLITUDE<br />
FM 3,OOkKz<br />
1kHz OFF<br />
REG 00<br />
-1360dBm<br />
RF OFF<br />
r: