Operation and Service Guide Agilent Technologies 8648A/B/C/D ...

More documents

Recommendations

Info

Operation Examples Using the Memory Registers 6. Save the settings in register 00. Press ft to check the new sequence. MODULATION AMPLJTU~E_cIIIIIIIIII""l-1Ill 8.00000 MHz rrnFREQUENCY I I ,_----=.=S=E=Q==O=R=E=G=O=O==============~~ insseq6.drw 1a-15
-- ---- Operation Examples . Offsetting the RF Output from a Reference Offsetting the RF Output from a Reference In this example, you will enter an RF output frequency, set it as the reference value, and then offset the RF output frequency 10 MHz below the reference value. Setting the Reference Value 1. Set the frequency to 500 MHz. MODULATION ---- -- ref1.drw 2. Set 500 MHz as the reference frequency. The Asymbol appears in the display to indicate that the reference mode is selected. The output frequency is still 500 MHz. ref2.drw 1a-16
Page 1 and 2: Operation and Service Guide Agilent
Page 3 and 4: Agilent Technologies warrants that
Page 5 and 6: Safety Notes The following safety n
Page 7 and 8: - WARNING For continued protection
Page 9 and 10: Contents lb. Operation Reference Fr
Page 11 and 12: Contents Phase Modulation 4-6 Ampli
Page 13 and 14: Contents Connect the Test Equipment
Page 15 and 16: Contents Connect the Test Equipment
Page 17 and 18: 1 Operation "Operation" contains th
Page 19 and 20: Operation Quick Overvtew The follow
Page 21 and 22: Operation Quick Overview 7. Modulat
Page 23 and 24: Operation Examples , 2 3 - MODULATI
Page 25 and 26: ~ Operation Examples Setting the RF
Page 27 and 28: Operation Examples Incrementing or
Page 29 and 30: Operation Examples . Using the Memo
Page 31 and 32: Operation Examples . Using the Memo
Page 33 and 34: Operation Examples Using the Memory
Page 35: 1 Operation Examples Using the Memo
Page 39 and 40: Operation Examples Offsetting the R
Page 41 and 42: Operation Examples . Holding the Ou
Page 43 and 44: Operation Examples . Setting a User
Page 45 and 46: I'L-l_-,=Li Operation Examples . Si
Page 47 and 48: Operation Examples . Signaling a Nu
Page 49 and 50: Operation Examples Signaling a Nume
Page 51 and 52: 1b Operation Reference This chapter
Page 53 and 54: Operation Reference Frequency and A
Page 55 and 56: Operation Reference Function 2. AMP
Page 57 and 58: Operation Reference Function [ I IA
Page 59 and 60: Operation Reference Function FLEX/F
Page 61 and 62: Operation Reference Function • ME
Page 63 and 64: Operation Reference Function • TE
Page 65 and 66: Operation Reference Function Settin
Page 67 and 68: Operation Reference Function After
Page 69 and 70: Operation Reference Function - With
Page 71 and 72: Operation Reference Function NOTE I
Page 73 and 74: Operation Reference Function For AL
Page 75 and 76: Operation Reference Function • MO
Page 77 and 78: I Operation Reference Function •
Page 79 and 80: Operation Reference Function Pulse
Page 81 and 82: Operation Reference Function Increm
Page 83 and 84: Operation Reference Function 3. emf
Page 85 and 86: Operation Reference Function Instru
Page 87 and 88:
Operation Reference Function Instru
Page 89 and 90:
Operation Reference Function Memory
Page 91 and 92:
Operation Reference Function 3. Reg
Page 93 and 94:
Operation Reference Function Modula
Page 95 and 96:
Operation Reference Function The ac
Page 97 and 98:
Operation Reference Function RF Out
Page 99 and 100:
Operation Reference Function CAUTIO
Page 101 and 102:
Operation Reference Function Remote
Page 103 and 104:
Operation Reference Function Memory
Page 105 and 106:
Operation messages . Front Panel Op
Page 107 and 108:
Operation messages Front Panel Oper
Page 109 and 110:
Frequency Specifications Range 8648
Page 111 and 112:
.1 Display Resolution _____________
Page 113 and 114:
Deviation Accuracy (internal 1 kHz
Page 115 and 116:
Distortion (1 kHz rate, THD + Noise
Page 117 and 118:
Translated Operating Manuals Option
Page 119:
Frequency Modulation FSK Deviation
show all

Operation and Service Guide Agilent Technologies 8648A/B/C/D ...

Create successful ePaper yourself

Delete template?

Save as template?