DDS RUT500 Router

Field name Sample value Explanation
1. Bring up on boot On Specifies whether the interface will be configured and brought up
when the router boots up. Disabling will render your WAN
connection non-functional
2 Disable NAT On/Off Toggle NAT on and off.
3. Override MAC address 00:0C:43:30:50:38 Override MAC address of the WAN interface. If your ISP gives you
a static IP address it might also bind it to your computers MAC
address (i.e. that IP will only work with your computer). In this
field you can enter your computers MAC address and fool the
gateway in thinking that it is communicating with your computer.
4. Override MTU 1500 Maximum transmission unit – specifies the largest possible size of
a data packet.
5. Use gateway metric 0 The WAN configuration by default generates a routing table entry.
With this field you can alter the metric of that entry.
DHCP:
29
www.ddszevenbergen.nl