2010 Nr. 11 - Standartizacijos departamentas prie AM

LIETUVOS STANDARTIZACIJOS DEPARTAMENTO BIULETENIS 2010 Nr. 11 

1

Turinys 

AKTUALIJOS ..................................................................................................... 5 

STANDARTUOSE BUS ATSIÞVELGIAMA Á LABAI MAÞØ, MAÞØ 

IR VIDUTINIØ ÁMONIØ REIKMES ............................................................................ 5 

IŠLEISTAS LST ISO 26000:2010 NURODYMAI DËL SOCIALINËS 

ATSAKOMYBËS (TAPATUS ISO 26000:2010) ......................................................... 5 

SUDARYTAS NAUJAS LIETUVOS STANDARTIZACIJOS DEPARTAMENTO 

TECHNIKOS KOMITETAS ....................................................................................... 6 

METROLOGIJA IR STANDARTIZACIJA EUROPOJE. 

EURAMET – NAUJAS CEN IR CENELEC BENDRADARBIAVIMO PARTNERIS ....... 8 

STANDARTIZACIJA ........................................................................................... 9 

IÐLEISTI LIETUVOS STANDARTAI .......................................................................... 9 

NETEKÆ GALIOS LIETUVOS STANDARTAI ........................................................... 19 

NETEKSIANTYS GALIOS LIETUVOS STANDARTAI ............................................... 24 

TARPTAUTINIØ IR EUROPOS ÁSTAIGØ BEI ORGANIZACIJØ STANDARTAI, 

KURIUOS DEPARTAMENTAS GAVO SPALIO MËN. ............................................. 25 

TARPTAUTINËS STANDARTIZACIJOS ORGANIZACIJOS STANDARTAI ......................................... 25 

TARPTAUTINËS ELEKTROTECHNIKOS KOMISIJOS STANDARTAI ............................................. 27 

RATIFIKUOTI EUROPOS STANDARTIZACIJOS KOMITETO STANDARTAI ...................................... 28 

RATIFIKUOTI EUROPOS ELEKTROTECHNIKOS STANDARTIZACIJOS KOMITETO STANDARTAI ............ 31 

RATIFIKUOTI EUROPOS TELEKOMUNIKACIJØ STANDARTØ INSTITUTO STANDARTAI ....................... 33 

REDAKCINË KOLEGIJA 

Redagavo A. Treèiokaitë 

Maketavo B. Meðkënienë 

2010-11-12 

© Lietuvos standartizacijos departamentas, 2010

Lietuvos standartizacijos departamento 

BIULETENIS 

2010 

Nr. 11 

VILNIUS, 2010

Lietuvos standartizacijos departamentas 

T. Kosciuðkos g. 30 

LT-01100 Vilnius 

Telefonas: (8~5) 270 9360 

El. paðtas: lstboard@lsd.lt 

Interneto tinklalapis: http://www.lsd.lt


AKTUALIJOS 

STANDARTUOSE BUS ATSIÞVELGIAMA Á LABAI MAÞØ, MAÞØ 

IR VIDUTINIØ ÁMONIØ REIKMES 

Siekdamas skatinti labai maþas, maþas ir vidutines ámones dalyvauti standartizacijoje bei atsiþvelgdamas 

á jø reikmes, Lietuvos standartizacijos departamentas 2010 m. lapkrièio mën. išleido standartizacijos dokumentà 

SD 14:2010 Nurodymai dël standartø rengimo, atsiþvelgiant á labai maþø, maþø ir vidutiniø ámoniø (MVÁ) 

reikmes. Dokumentas išleistas lietuviø ir anglø kalbomis. 

Šis standartizacijos dokumentas skirtas standartø rengëjams, jame pateikiamos gairës, patarimai ir 

rekomendacijos, kaip rengiant standartus atsiþvelgti á labai maþø, maþø ir vidutiniø ámoniø reikmes. 

Susipaþinti su šiuo dokumentu galima Lietuvos standartizacijos departamento bibliotekoje arba ásigyti 

Informacijos skyriaus Platinimo poskyryje. 

IŠLEISTAS LST ISO 26000:2010 NURODYMAI DËL SOCIALINËS 

ATSAKOMYBËS (TAPATUS ISO 26000:2010) 

Ðis standartas gali bûti taikomas visose ámonëse, ástaigose, organizacijose, nesvarbu, koks jø tipas, 

didumas ir tiekiamas produktas, kadangi socialinë atsakomybë apima aplinkosauginius, socialinius, 

finansinius, etinius aspektus. Standarte pateiktos nuostatos aprëpia tokius klausimus kaip organizacijos 

valdymas, þmogaus teisës, darbinë veikla ir aplinka, sàþiningo verslo praktika, vartotojø reikalai ir pan. Šios 

nuostatos atitinka Tarptautinës darbo organizacijos konvencijos, Pasaulinës þmogaus teisiø deklaracijos, 

Jungtiniø Tautø konvencijos bei ávairiø tarptautiniø susitarimø nuostatas. 

Susipaþinti su ðiuo dokumentu galima Lietuvos standartizacijos departamento bibliotekoje arba ásigyti 

Informacijos skyriaus Platinimo poskyryje. 

Parengë Marijana Simutienë 

5

2010 Nr. 11 LIETUVOS STANDARTIZACIJOS DEPARTAMENTO BIULETENIS 

SUDARYTAS NAUJAS LIETUVOS STANDARTIZACIJOS 

DEPARTAMENTO TECHNIKOS KOMITETAS 

2010 m. rugsëjo 13 d. Lietuvos standartizacijos departamentas sudarë naujà technikos komitetà 

LST TK 82 Nebëginiø antþeminiø transporto priemoniø sauga. 

Ðio technikos komiteto veiklos sritis numatyta labai plati. Ji apima visureigiø, velomobiliø, sniegomobiliø, 

keturraèiø motociklø, gyvenamøjø poilsiniø transporto priemoniø, gamtinëmis dujomis ar elektra varomø 

transporto priemoniø ir kitø transporto priemoniø, naudojamø vieðuose ir nevieðuose keliuose, taip pat 

pramoniniø krautuvø ergonomikos, funkcinius, asmenø saugos bei jø sveikatos apsaugos reikalavimus ir ðiø 

srièiø terminus. Komitetas bendradarbiaus su 9 atitiktiniais Europos standartizacijos komiteto (CEN) ir Tarptautinës 

standartizacijos organizacijos (ISO) technikos komitetais. 

Sudaromajame susirinkime dalyvavo Valdemaras Priðmontas (Valstybinë darbo inspekcija), Virginijus 

Jusys (Valstybinë ne maisto produktø inspekcija), Alfredas Lankauskas (Ðiauliø universitetas), Jonas Budrys 

(Valstybinë maðinø bandymø stotis), Stasys Slavinskas (Lietuvos þemës ûkio universitetas), Algirdas Þukauskas 

(Lietuvos automobiliø asociacija), 

Jonas Sapragonas (Kauno technologijos 

universitetas), Saugirdas Pukalskas 

(Vilniaus Gedimino technikos universiteto 

Automobiliø transporto katedra), Gintautas 

Bureika, (Vilniaus Gedimino technikos 

universiteto Geleþinkeliø transporto 

katedra), Egidijus Gaigalas (UAB Paradis), 

Lietuvos standartizacijos departamento 

Standartizacijos skyriaus 2-ojo 

poskyrio vedëja Marija Tebëraitë, Lietuvos 

standartizacijos departamento darbuotoja 

Violeta Peèiukënaitë. 

Paðtu buvo iðsiøstas 31 kvietimas su 

technikos komiteto nuostatø ir veiklos 

plano projektais, daugiau kaip 20 ûkio 

subjektø buvo kvieèiami siunèiant informacijà 

el. paðtu ir telefoniniø pokalbiø 

metu. Sudaromajame susirinkime kalbëjusi 

Marija Tebëraitë paminëjo, kad technikos 

komiteto nariai, nagrinëdami standartø 

projektus, dirba kaip ekspertai. 

Bûti ekspertu sudëtinga ir atsakinga misija, 

bet taip garsinamas Lietuvos vardas, 

jei dirbama atsakingai. Tikimasi, kad 

ið naujojo technikos komiteto nariø tarpo 

atsiras ágaliotøjø atstovø, kurie tikrai 

galës dalyvauti CEN darbo grupëse, rengiant 

Europos standartø projektus, dalyvauti 

kituose CEN projektuose. 

Technikos komiteto LST TK 82 nuostatai 

ir veiklos planas paskelbta Departamento 

tinklapyje www.lsd.lt. 

6


Departamento direktoriaus ásakymu technikos komiteto LST TK 82 pirmininku 6 metø kadencijai patvirtintas 

doc. dr. Saugirdas Pukalskas, Vilniaus Gedimino technikos universiteto Automobiliø transporto katedros 

vedëjas, jo pavaduotoju Virginijus Jusys, Valstybinës ne maisto produktø inspekcijos ágaliotasis atstovas, 

sekretore Violeta Peèiukënaitë. 

Naujas technikos komitetas patvirtino 2011 m. standartø programos projektà ir numatë darbo grupes 

programai ágyvendinti. 

Technikos komiteto veikla yra atvira, todël kvieèiama ásijungti daugiau suinteresuotø mokslo, pramonës, 

profsàjungø, vartotojø teisiø gynimo institucijø atstovø. 

Parengë Marija Tebëraitë 

7


METROLOGIJA IR STANDARTIZACIJA EUROPOJE. 

EURAMET – NAUJAS CEN IR CENELEC 

BENDRADARBIAVIMO PARTNERIS 

Neseniai Nacionaliniø metrologijos institucijø Europos asociacija (EURAMET), Europos standartizacijos 

komitetas (CEN) ir Europos elektrotechnikos standartizacijos komitetas (CENELEC) pasiraðë bendradarbiavimo 

susitarimà, kuris sudarys didesnes galimybes sieti standartizacijà ir Europos lëðomis atliekamus mokslinius 

tyrimus metrologijos srityje. 

Pagal ðá susitarimà CEN, CENELEC ir EURAMET sieks strateginiø tikslø ir vykdys bendrus metrologijos ir 

standartizacijos projektus, kurie skatins mokslo paþangà ir technologines inovacijas, kad socialiniai iððûkiai 

Europos ekonomikai ir gyvenimo kokybës lygiui bûtø patenkinti. 

Inovacijos yra strategiðkai svarbios CEN ir CENELEC ir yra jø veiklos centre. Lygiai tiek pat inovacijos 

svarbios ir EURAMET, kuri siekia paspartinti moksliniø tyrimø galimybiø plëtrà tokiose inovacinëse srityse 

kaip sveikatos apsauga, energetika, aplinka ir paþengusiø technologijø sektoriai, kuriuose CEN ir CENELEC 

vykdo aktyvià standartizacijos veiklà. 

CEN, CENELEC ir EURAMET sutarë bendradarbiauti tokiose EURAMET veiklos srityse kaip moksliniai 

tyrimai, þiniø keitimasis ir infrastruktûrinë parama metrologijos srityje, nacionaliniø matavimo etalonø ir kalibravimo 

bei matavimo galimybiø (CMC) tarptautinis pripaþinimas. 

Bendradarbiavimo susitarimas parengtas vadovaujantis 2008 m. rugsëjo 25 d. Tarybos iðvadomis dël 

standartizacijos ir inovacijø bei EB sutarties 185 (buvusiu 169) straipsniu. Ðiuose dokumentuose kalbama 

apie geresná moksliniø tyrimø koordinavimà ir moksliniø tyrimø bei inovacijø politikos konvergencijà nacionaliniu 

ir ES lygmeniu. 

Pagal CEN ir CENELEC informacijà parengë V. Domkus 

8


STANDARTIZACIJA 

IÐLEISTI LIETUVOS STANDARTAI 

TK 1 ELEKTRONIKA 

LST EN 31010:2010 en 

Rizikos valdymas. Rizikos vertinimo bûdai 

(IEC/ISO 31010:2009) 

X (98 Lt) 

LST EN 50325-5:2010 en 

Pramoniniø ryðiø posistemis pagal ISO 11898 (CAN) 

valdymo átaisø sietuvams. 5 dalis. Funkcinës saugos ryðys 

pagal EN 50325-4 

R (66 Lt) 

LST EN 50377-8-10:2010 en 

Jungèiø komplektai ir jungiamieji komponentai, naudojami 

skaidulinës optikos ryðio sistemose. Techniniai gaminio 

reikalavimai. 8-10 dalis. C kategorijos LSH-APC vienguboji 

sudëtinë movinë titano jungtis, prijungta prie B1.1 ir 

B1.3 kategorijos vienmodës skaidulos, atitinkanèios 

IEC 60793-2-50 

Q (63 Lt) 

LST EN 50377-8-11:2010 en 



reikalavimai. 8-11 dalis. C kategorijos LSH-PC vienguboji 



IEC 60793-2-50 

Q (63 Lt) 




reikalavimai. 8-12 dalis. U kategorijos LSH-APC vienguboji 



IEC 60793-2-50 

R (66 Lt) 




reikalavimai. 8-13 dalis. U kategorijos LSH-PC vienguboji 



IEC 60793-2-50 

R (66 Lt) 


Bendrieji reikalavimai, keliami elektroninëms namø bei 

pastatø sistemoms (ENPS) ir pastatø automatizavimo bei 

valdymo sistemoms (PAVS). 2 dalis. Aplinkos sàlygos 

H (40 Lt) 




valdymo sistemoms (PAVS). 5-1 dalis. Elektromagnetinio 

suderinamumo reikalavimai, sàlygos ir bandymo stendas 

Nuo 2013-04-01 ið dalies pakeièia 

LST EN 50090-2-2+AC:2000, 

LST EN 50090-2-2+AC:2000/A1:2002, 

LST EN 50090-2-2+AC:2000/A2:2007 

J (43 Lt) 


Bendrieji reikalavimai, keliami elektroninëms namø bei pastatø 

sistemoms (ENPS) ir pastatø automatizavimo bei valdymo 

sistemoms (PAVS). 5-2 dalis. Elektromagnetinio suderinamumo 

reikalavimai, keliami gyvenamosiose, komercinëse ir lengvosios 

pramonës ámoniø patalpose naudojamoms ENPS ir PAVS 


LST EN 50090-2-2+AC:2000, 

LST EN 50090-2-2+AC:2000/A1:2002, 

LST EN 50090-2-2+AC:2000/A2:2007 

G (36 Lt) 




valdymo sistemoms (PAVS). 5-3 dalis. Elektromagnetinio 

suderinamumo reikalavimai, keliami pramoninëje aplinkoje 

naudojamoms ENPS ir PAVS 


LST EN 50090-2-2+AC:2000, 

LST EN 50090-2-2+AC:2000/A1:2002, 

LST EN 50090-2-2+AC:2000/A2:2007 

D (27 Lt) 


Prie tinklo prijungtø fotovoltiniø inverteriø visuminis 

efektyvumas 

R (66 Lt) 


Aplinkos poveikio bandymai. 2-53 dalis. Bandymai ir 

nurodymai. Sudëtiniai klimatiniai (temperatûros ir drëgmës 

poveikio) ir dinaminiai (vibraciniai ir smûginiai) bandymai 

(IEC 60068-2-53:2010) 

Nuo 2013-05-01 pakeièia LST EN 60068-2-51:2001, 

LST EN 60068-2-50:2001 

J (43 Lt) 


Mechaninis puslaidininkiniø átaisø standartizavimas. 6-19 dalis. 

Korpuso persimetimo aukðtoje temperatûroje ir didþiausio 

leidþiamojo persimetimo matavimo metodai 


G (36 Lt) 


Elektroakustika. Þmogaus galvos ir ausies modeliavimo 

átaisai. 4 dalis. Uþkimðtos ausies imitatorius ausiniø, kurios 

ausø ádëklais susiejamos su ausimis, charakteristikoms 

matuoti (IEC 60318-4:2010) 

Nuo 2013-05-01 pakeièia LST HD 443 S1:2002 

K (47 Lt) 


Elektroninës árangos jungtys. Bandymai ir matavimai. 

7-1 dalis. Smûginiai bandymai (laisvosios jungtys). 7a bandymas. 

Kartotinis laisvasis kritimas (IEC 60512-7-1:2010) 

D (27 Lt) 


Elektroninës árangos jungtys. Bandymai ir matavimai. 

9-5 dalis. Ilgalaikiðkumo bandymai. 9e bandymas. Ciklinë 

srovinë apkrova (IEC 60512-9-5:2010) 

C (23 Lt) 


Elektroninës árangos jungtys. 7-41 dalis. 8 takeliø 

neekranuotø laisvøjø ir tvirtinamøjø jungèiø, naudojamø 

duomenims perduoti maþesniais kaip 500 MHz daþniais, 

detalusis apraðas (IEC 60603-7-41:2010) 

G (36 Lt) 

9



Elektroninës árangos jungtys. 7-51 dalis. 8 takeliø ekranuotø 

laisvøjø ir tvirtinamøjø jungèiø, naudojamø duomenims 

perduoti maþesniais kaip 500 MHz daþniais, detalusis 

apraðas (IEC 60603-7-51:2010) 

G (36 Lt) 


Spausdintiniø plokðèiø ir kitø jungiamøjø dariniø medþiagos. 

2-41 dalis. Sustiprintos plakiruotosios ir neplakiruotosios 

pagrindo medþiagos. Variu plakiruoti, apibrëþto degumo 

(nustatomo vertikaliojo degimo bandymu), sluoksniniai, 

brominta epoksidine derva ámirkyto celiuliozës popieriaus ir 

E stiklo audiniu sustiprinti lakðtai, skirti beðvinëms sàrankoms 


L (51 Lt) 


Spausdintiniø plokðèiø ir kitø jungiamøjø dariniø medþiagos. 

2-42 dalis. Sustiprintos plakiruotosios ir neplakiruotosios 

pagrindo medþiagos. Variu plakiruoti, apibrëþto degumo 

(nustatomo vertikaliojo degimo bandymu), sluoksniniai, 

brominta epoksidine derva ámirkyto neaustinio E stiklo 

audinio ir ðiuo audiniu sustiprinti lakðtai, skirti beðvinëms 

sàrankoms (IEC 61249-2-42:2010) 

L (51 Lt) 


Ðviesolaidinio ryðio posistemio bandymo procedûros. 

1-3 dalis. Bendrieji ryðio posistemiai. Centrinio bangos ilgio ir 

spektro juostos ploèio matavimas (IEC 61280-1-3:2010) 

Nuo 2013-05-01 pakeièia LST EN 61280-1-3:2003 

J (43 Lt) 


Elektrostatika. 5-3 dalis. Elektroniniø átaisø apsauga nuo 

elektrostatiniø reiðkiniø. Savybiø ir reikalavimø, susijusiø su 

elektrostatiniam iðlydþiui jautriø átaisø pakavimu, 

klasifikavimas (IEC 61340-5-3:2010) 

J (43 Lt) 


Elektriniø, elektroniniø, programuojamø elektroniniø su sauga 

siejamø sistemø funkcinë sauga. 1 dalis. Bendrieji 

reikalavimai (IEC 61508-1:2010) 

Nuo 2013-05-01 pakeièia LST EN 61508-1:2002 

V (85 Lt) 



siejamø sistemø funkcinë sauga. 2 dalis. Reikalavimai, keliami 

elektrinëms, elektroninëms, programuojamoms elektroninëms 

su sauga siejamoms sistemoms (IEC 61508-2:2010) 


X (98 Lt) 



siejamø sistemø funkcinë sauga. 3 dalis. Reikalavimai, keliami 

programinei árangai (IEC 61508-3:2010) 


XA (104 Lt) 



siejamø sistemø funkcinë sauga. 4 dalis. Apibrëþtys ir 

santrumpos (IEC 61508-4:2010) 


Q (63 Lt) 



siejamø sistemø funkcinë sauga. 5 dalis. Saugos vientisumo 

lygiø nustatymo metodø pavyzdþiai (IEC 61508-5:2010) 


T (74 Lt) 



siejamø sistemø funkcinë sauga. 6 dalis. IEC 61508-2 ir 

IEC 61508-3 taikymo gairës (IEC 61508-6:2010) 


XA (104 Lt) 

10 



siejamø sistemø funkcinë sauga. 7 dalis. Bûdø ir priemoniø 

apþvalga (IEC 61508-7:2010) 


XB (112 Lt) 


Skaiduliniai optiniai sujungimo átaisai ir pasyvieji 

komponentai. Skaiduliniai optiniai filtrai. Bendrasis rûðinis 

apraðas (IEC 61977:2010) 

Nuo 2011-05-01 pakeièia LST EN 61977:2003 

M (54 Lt) 


Skaiduliniai optiniai sujungimo átaisai ir pasyvieji 

komponentai. Skaiduliniai optiniai cirkuliatoriai. Bendrasis 

rûðinis apraðas (IEC 62077:2010) 

Nuo 2011-05-01 pakeièia LST EN 62077:2002 

M (54 Lt) 


Puslaidininkiniai átaisai. Judriøjø jonø metalo-oksidopuslaidininkio 

lauko tranzistoriuose tyrimas (IEC 62417:2010) 

D (27 Lt) 


Optinio grandyno plokðtës. Eksploataciniø charakteristikø 

standartas. 3-1 dalis. Lanksèiosios optinio grandyno 

plokðtës, kuriose naudojamos bejungtës optinës stiklinës 

skaidulos (IEC 62496-3-1:2009) 

G (36 Lt) 

TK 4 INFORMACIJOS TECHNOLOGIJA 

LST ISO/IEC 10646:2005/A7:2010 en 

Informacijos technologija. Universalus keliais baitais koduotø 

þenklø rinkinys. 7 keitinys. Mandaic, batak, brahmi ir kitokie 

þenklai (tapatus ISO/IEC 10646:2003/Amd.7:2010) 

R (66 Lt) 

TK 5 ELEKTROTECHNIKA 


Kabeliø dëþiniø kanalø ir kabeliø kanalø sistemos elektrai 

árengti. 2-3 dalis. Ypatingieji reikalavimai, keliami spintose 

árengiamø kabeliø plyðiniø dëþiniø kanalø sistemoms 

Nuo 2013-03-01 pakeièia LST EN 50085-2-3:2001 

J (43 Lt) 


Didesnës kaip 1 kV ir ne didesnës kaip 36 kV vardinës 

kintamosios átampos oro linijø laidai su apvalkalu ir susijæ 

pagalbiniai reikmenys. 3 dalis. Naudojimo vadovas 

K (47 Lt) 


Sukiosios elektros maðinos. 18-1 dalis. Funkcinis 

izoliacijos sistemø ávertinimas. Bendrosios gairës 


Nuo 2013-05-01 pakeièia 

LST EN 60034-18-1+A1:2000 

J (43 Lt) 

LST EN 60335-2-21:2003/AC:2010 en 

Buitiniai ir panaðios paskirties elektriniai prietaisai. Sauga. 

2-21 dalis. Ypatingieji reikalavimai, keliami kaupiamiesiems 

vandens ðildytuvams (IEC 60335-2-21:2002, modifikuotas) 


Gaisrinio pavojingumo bandymai. 1-10 dalis. Elektrotechniniø 

gaminiø gaisrinio pavojingumo vertinimo nurodymai. 

Bendrosios gairës (IEC 60695-1-10:2009) 


LST EN 60695-1-1:2001 

J (43 Lt)



Gaisrinio pavojingumo bandymai. 1-11 dalis. Elektrotechniniø 

gaminiø gaisrinio pavojingumo vertinimo nurodymai. Gaisrinio 

pavojingumo vertinimas (IEC 60695-1-11:2010) 


LST EN 60695-1-1:2001 

S (69 Lt) 


Rankiniai varikliniai elektriniai árankiai. Sauga. 2-1 dalis. 

Ypatingieji reikalavimai, keliami græþtuvams ir smûginiams 

græþtuvams (IEC 60745-2-1:2003, modifikuotas + A1:2008) 


LST EN 60745-2-1:2003/A1:2009, 

LST EN 60745-2-1:2003/A11:2007, 

LST EN 60745-2-1:2003/A12:2010 

L (51 Lt) 



Ypatingieji reikalavimai, keliami sraigtø suktuvams ir 

smûginiams verþliø suktuvams (IEC 60745-2-2:2003, 

modifikuotas + A1:2008) 


LST EN 60745-2-2:2003/A1:2009, 

LST EN 60745-2-2:2003/A11:2007, 

LST EN 60745-2-2:2003/A12:2010 

H (40 Lt) 



Ypatingieji reikalavimai, keliami plaktukams 

(IEC 60745-2-6:2003, modifikuotas + A1:2006 + A2:2008) 


LST EN 60745-2-6:2003/A1:2006, 

LST EN 60745-2-6:2003/A2:2009, 

LST EN 60745-2-6:2003/A12:2010, 

LST EN 60745-2-6:2003/A11:2007 

P (61 Lt) 


Rankiniai varikliniai elektriniai árankiai. Sauga. 2-11 dalis. 

Ypatingieji reikalavimai, keliami slankiojamojo judesio 

pjûklams (siaurapjûkliams ir pjûkleliams) 

(IEC 60745-2-11:2003, modifikuotas + A1:2008) 

Nuo 2013-02-01 pakeièia 

LST EN 60745-2-11:2003/A12:2010, 

LST EN 60745-2-11:2003/A1:2009, 

LST EN 60745-2-11:2003/A11:2007, 

LST EN 60745-2-11:2003 

H (40 Lt) 


Standartizuotø duomenø elementø tipai su susijusia elektriniø 

komponentø klasifikacijos schema. 1 dalis. Apibrëþtys. 

Principai ir metodai (IEC 61360-1:2009) 

Nuo 2013-05-01 pakeièia LST EN 61360-1:2002, 

LST EN 61360-1:2002/A1:2004 

X (98 Lt) 

LST EN 61549:2003/A2:2010 en 

Ávairios lempos (IEC 61549:2003/A2:2010) 

D (27 Lt) 

TK 8 ELEKTROMAGNETINIS SUDERINAMUMAS 


Elektromagnetinis suderinamumas (EMS). Transporto 

priemonëse árengiamos papildomos elektroninës árangos 

gaminiø ðeimos standartas 

E (29 Lt) 

LST EN 55020:2007/IS2:2010 en 

Radijo ir televizijos transliacijø imtuvai ir susijusioji áranga. 

Atsparumo charakteristikos. Ribinës vertës ir matavimo 

metodai. 1.7 poskyrio aiðkinimas 

TK 12 AUTOMOBILIØ KELIAI 


Apsauginiø kelio atitvarø sistemos. 1 dalis. Terminija ir 

bendrieji bandymo metodø kriterijai 

Pakeièia LST EN 1317-1:2001 

R (66 Lt) 


Apsauginiø kelio atitvarø sistemos. 2 dalis. Saugos barjerø, 

áskaitant transporto priemoniø parapetus, eksploataciniø 

charakteristikø klasës, priimamieji smûginiø bandymø 

kriterijai ir bandymo metodai 

Pakeièia LST EN 1317-2:2001, 

LST EN 1317-2:2001/A1:2006 

N (56 Lt) 


Apsauginiø kelio atitvarø sistemos. 3 dalis. Smûgio slopintuvø 

eksploataciniø charakteristikø klasës, priimamieji smûginiø 

bandymø kriterijai ir bandymo metodai 


N (56 Lt) 


Bituminiai miðiniai. Karðtojo asfalto miðinio bandymo metodai. 

47 dalis. Gamtinio bitumo pelenø kiekio nustatymas 

D (27 Lt) 

LST EN 13108-20:2006 lt 

Bituminiai miðiniai. Medþiagos techniniai reikalavimai. 20 dalis. 

Tipo bandymai 

N (56 Lt) 

LST EN 13108-20:2006/AC:2008 lt 


Tipo bandymai 

LST EN 13108-20:2006/P:2010 en 


Tipo bandymai 

TK 17 MEDIENA 

LST EN 975-1:2009/AC:2010 en 

Pjautinë mediena. Lapuoèiø medienos rûðiavimas pagal 

iðvaizdà. 1 dalis. Àþuolas ir bukas 

TK 18 TELEKOMUNIKACIJOS 

LST EN 301 442 V1.2.1:2010 en 

Palydovinës antþeminës stotys ir sistemos (PASS). Judriøjø 

antþeminiø stoèiø, áskaitant neðiojamàsias antþemines stotis, 

skirtas palydovinio ryðio tarnybos asmens ryðiø tinklams 

2,0 GHz daþniø juostoje, darnusis Europos standartas, 

apimantis esminius reikalavimus pagal 1999/5/EC direktyvos 

3.2 straipsná 

R (66 Lt) 

LST EN 302 574-1 V1.1.1:2010 en 

Palydovinës antþeminës stotys ir sistemos (PASS). 

Palydoviniø antþeminiø stoèiø, veikianèiø nuo 1 980 MHz iki 

2 010 MHz (Þemë-kosmosas) ir nuo 2 170 MHz iki 2 200 

MHz (kosmosas-Þemë) daþniø juostose ir skirtø judriosioms 

palydovinio ryðio tarnyboms, darnusis standartas. 1 dalis. 

Papildomas antþeminis komponentas, skirtas 

plaèiajuostëms sistemoms. Darnusis Europos standartas, 

apimantis 1999/5/EC direktyvos 3.2 straipsnio esminius 

reikalavimus 

S (69 Lt) 

11





2 010 MHz (Þemë-kosmosas) ir nuo 2 170 MHz iki 2 200 MHz 

(kosmosas-Þemë) daþniø juostose ir skirtø judriosioms 


Plaèiajuosèiø sistemø naudotojo áranga. Darnusis Europos 

standartas, apimantis 1999/5/EC direktyvos 3.2 straipsnio 

esminius reikalavimus 

Q (63 Lt) 




2 010 MHz (Þemë-kosmosas) ir nuo 2 170 MHz iki 2 200 MHz 

(kosmosas-Þemë) daþniø juostose ir skirtø judriosioms 


Siaurajuosèiø sistemø naudotojo áranga. Darnusis Europos 

standartas, apimantis 1999/5/EC direktyvos 3.2 straipsnio 

esminius reikalavimus 

R (66 Lt) 


Pastatø árangos ir pramoniniø árenginiø termoizoliaciniai 

gaminiai. Darbø vietoje formuojama ðiltinamoji izoliacija ið 

sluoksniuotojo vermikulito (EV) gaminiø. 1 dalis. 

Nesuformuotø suriðtø ir palaidø gaminiø techniniai 

reikalavimai 

M (54 Lt) 




sluoksniuotojo vermikulito (EV) gaminiø. 2 dalis. Árengtø 

gaminiø techniniai reikalavimai 

D (27 Lt) 

LST EN ISO 12567-1:2010 en 

Ðiluminës langø ir durø charakteristikos. Ðilumos perdavimo 

koeficiento nustatymas karðtosios dëþës metodu. 1 dalis. 

Surinkti langai ir durys (ISO 12567-1:2010) 

Pakeièia LST EN ISO 12567-1:2002 

U (77 Lt) 

TK 20 ÞAISLAI, VAIKØ NAUDOJAMI DAIKTAI BEI SPORTO IR 

AKTYVAUS POILSIO ÁRANGA 

LST EN 14974:2006+A1:2010 en 

Rieduèiø sporto árangos naudotojø reikmenys. Saugos 

reikalavimai ir bandymo metodai 

Pakeièia LST EN 14974:2006 

N (56 Lt) 

TK 21 TEKSTILË 

LST EN ISO 105-E05:2010 en 

Tekstilë. Nusidaþymo atsparumo nustatymas. E05 dalis. 

Nusidaþymo atsparumas dëmëjimui rûgðtimi 

(ISO 105-E05:2010) 

Pakeièia LST EN ISO 105-E05:2007, 

LST EN ISO 105-E05:2007/AC:2007 

C (23 Lt) 

TK 22 PRIEÐGAISRINË SAUGA 

LST EN 13565-1:2004+A1:2008 lt 

Stacionariosios gaisro gesinimo sistemos. Putø sistemos. 

1 dalis. Komponentø reikalavimai ir bandymø metodai 

N (56 Lt) 


Statybiniø gaminiø reakcijos á ugná bandymai. Statybiniai 

gaminiai, iðskyrus grindø dangas, kuriuos veikia vieno 

deganèio objekto ðiluma 


X (98 Lt) 

TK 26 TERMOIZOLIACINËS MEDÞIAGOS 




pûstojo perlito (EP) gaminiø. 1 dalis. Nesuformuotø suriðtø ir 

palaidø gaminiø techniniai reikalavimai 

M (54 Lt) 




pûstojo perlito (EP) gaminiø. 2 dalis. Árengtø gaminiø 

techniniai reikalavimai 

D (27 Lt) 

TK 28 DUJØ SISTEMOS 

LST EN 30-1-1:2008+A1:2010 en 

Buitiniai dujiniai virimo ir kepimo prietaisai. 1-1 dalis. Sauga. 

Bendrieji dalykai 

Pakeièia LST EN 30-1-1:2008 


TK 29 VANDENTVARKA 


Buitinës vonios 

Nuo 2012-04-30 pakeièia LST EN 14516:2006 

L (51 Lt) 


Buitinës duðø dugninës 


L (51 Lt) 

TK 30 TECHNINIAI GAMINIØ DOKUMENTAI 

LST ISO 7010:2004/A5:2010 en 

Grafiniai simboliai. Saugos spalvos ir saugos þenklai. Saugos 

þenklai, vartojami darbo ir vieðose vietose. 5 keitinys (tapatus 

ISO 7010:2003/Amd.5:2010) 

D (27 Lt) 

TK 32 SVEIKATA 

LST EN 14180:2004+A2:2009 lt 

Medicininiai sterilizatoriai. Þematemperatûriai gariniai ir 

formaldehidiniai sterilizatoriai. Reikalavimai ir bandymai 

U (77 Lt) 

LST EN ISO 28158:2010 en 

Odontologija. Átaisomasis tarpdanèiø siûlas ir jo laikikliai 

(ISO 28158:2010) 

E (29 Lt) 

TK 34 METROLOGIJA 


Geometrinës gaminio specifikacijos (GGS). Plotinë pavirðiaus 

tekstûra. 601 dalis. Vardinës sàlytiniø (su liestuku) matuokliø 

charakteristikos (ISO 25178-601:2010) 

K (47 Lt) 

12




tekstûra. 602 dalis. Vardinës nesàlytiniø (su konfokaliniais 

chromatiniais zondais) matuokliø charakteristikos 

(ISO 25178-602:2010) 

Q (63 Lt) 



tekstûra. 701 dalis. Sàlytiniø (su liestuku) matuokliø 

kalibravimas ir jø etalonai (ISO 25178-701:2010) 

N (56 Lt) 

TK 35 DARBØ SAUGA 


Asmeninë apsaugos nuo kritimo áranga. Saugos virvës 


H (40 Lt) 

LST EN 379:2004+A1:2009 lt 

Asmeninë akiø apsauga. Automatiniai suvirinimo filtrai 

M (54 Lt) 


Apsauginiø drabuþiø medþiagos atsparumas dilinimui. 

Bandymo metodai 

Pakeièia LST EN 530:1997, 

LST EN 530:1997/AC:2002 

F (33 Lt) 


Asmeninë akiø apsauga. Apsauginiai akiniai, skirti motociklø 

ir mopedø naudotojams 


Q (63 Lt) 

LST EN 13000:2010/AC:2010 en 

Kranai. Savaeigiai kranai 


Palëpës kopëèios. Reikalavimai, þenklinimas ir bandymai 


H (40 Lt) 

LST EN ISO 14116:2008/AC:2010 fr 

Apsauginiai drabuþiai. Apsauga nuo karðèio ir liepsnos. 

Riboto liepsnos plitimo medþiagos, jø deriniai ir apranga. 

1 techninë pataisa (ISO 14116:2008/Cor.1:2009) 

LST EN ISO 14122-4:2005/A1:2010 en 

Maðinø sauga. Nuolatinës priëjimo prie maðinø priemonës. 

4 dalis. Stacionariosios kopëèios. 1 keitinys 

(ISO 14122-4:2004/Amd.1:2010) 

E (29 Lt) 

TK 36 APLINKOS APSAUGA 

LST EN 13071-1:2008/AC:2010 lt 

Stacionarieji iki 5000 l talpos atliekø konteineriai su virðutiniu 

këlimo ir apatiniu tuðtinimo átaisu. 1 dalis. Bendrieji reikalavimai 

LST EN 13071-2:2008/AC:2010 lt 

Stacionarieji iki 5000 l talpos atliekø konteineriai su virðutiniu 

këlimo ir apatiniu tuðtinimo átaisu. 2 dalis. Papildomieji reikalavimai, 

keliami poþeminëms arba pusiau poþeminëms sistemoms 

LST ISO 2575:2010 en 

Keliø transporto priemonës. Valdytuvø, rodytuvø ir signaliniø 

lempuèiø simboliai (tapatus ISO 2575:2010) 

Pakeièia LST ISO 2575+A1+A2:2006, 

LST ISO 2575+A1+A2:2006/A3:2009, 

LST ISO 2575+A1+A2:2006/A4:2009 

U (77 Lt) 

TK 41 SUVIRINIMAS IR MEDÞIAGOTYRA 

LST CEN/TR 13445-9:2010 en 

Nekaitinamieji slëginiai indai. 9 dalis. Standarto EN 13445 

daliø ir ISO 16528 atitikimas 

R (66 Lt) 

LST EN 13445-1:2009 2 leidimas en 

Nekaitinamieji slëginiai indai. 1 dalis. Bendrieji reikalavimai 

Pakeièia LST EN 13445-1:2009 1 leidimà 

R (66 Lt) 


Nekaitinamieji slëginiai indai. 2 dalis. Medþiagos 


X (98 Lt) 


Nekaitinamieji slëginiai indai. 3 dalis. Projektavimas 


XP (251 Lt) 


Nekaitinamieji slëginiai indai. 4 dalis. Gamyba 


U (77 Lt) 


Nekaitinamieji slëginiai indai. 5 dalis. Tikrinimas ir bandymai 


X (98 Lt) 


Nekaitinamieji slëginiai indai. 6 dalis. Slëginiø indø ir slëginiø 

daliø, konstruojamø ið rutulinio grafito lietojo ketaus, 

projektavimo ir gamybos reikalavimai 


U (77 Lt) 


Nekaitinamieji slëginiai indai. 8 dalis. Papildomieji 

reikalavimai, keliami aliuminio ir aliuminio lydiniø slëginiams 

indams 


M (54 Lt) 

TK 43 GELEÞINKELIØ TRANSPORTAS 

LST EN 13261:2009 lt 

Geleþinkelio taikmenys. Aðiraèiai ir dviaðiai veþimëliai. Aðys. 

Gaminio reikalavimai 

T (74 Lt) 

LST EN 13262:2004+A1:2009 lt 

Geleþinkelio taikmenys. Aðiraèiai ir dviaðiai veþimëliai. Ratai. 

Gaminio reikalavimai 

R (66 Lt) 

LST EN 13674-2:2006+A1:2010 en 

Geleþinkelio taikmenys. Geleþinkelio kelias. Bëgiai. 2 dalis. 

Ieðmø ir bëgiø sankryþø bëgiai, naudojami kartu su 46 kg/m 

ir didesnës ilginës masës plaèiapadþiais geleþinkelio bëgiais 


XA (104 Lt) 


Geleþinkelio taikmenys. Geleþinkelio kelias. Bëgiai. 3 dalis. 

Gretbëgiai 


L (51 Lt) 


Geleþinkelio taikmenys. Geleþinkelio kelias. Projektiniai kelio 

trasos parametrai. 1 435 mm ir platesnës vëþës kelias. 

1 dalis. Bëgiø kelias 

Pakeièia LST L ENV 13803-1:2004 

V (85 Lt) 

13


LST EN 13803-2:2007+A1:2010 lt 



2 dalis. Ieðmai ir bëgiø sankryþos bei panaðios trasos su 

staigiais kreivumo pokyèiais projektavimo situacijos 

R (66 Lt) 

LST EN 13803-2:2007+A1:2010/P:2010 en 



2 dalis. Ieðmai ir bëgiø sankryþos bei panaðios trasos su 

staigiais kreivumo pokyèiais projektavimo situacijos 


Geleþinkelio taikmenys. Geleþinkelio kelias. Termitinis bëgiø 

suvirinimas. 1 dalis. Suvirinimo procedûros patvirtinimas 


LST EN 14730-1:2006/P:2008 

U (77 Lt) 

LST EN 50125-2:2004/AC:2010 en 

Geleþinkelio taikmenys. Aplinkos poveikis árenginiams. 

2 dalis. Stacionarioji elektros áranga 

LST EN 50149:2002/AC:2010 en 

Geleþinkelio taikmenys. Stacionarioji áranga. Elektrinë trauka. 

Vario ir vario lydiniø kontaktiniai laidai su grioveliais 


Geleþinkelio taikmenys. Stacionarioji áranga. Elektrinë trauka. 

Specialieji kompoziciniø izoliatoriø reikalavimai 

LST EN 50153:2003 lt 

Geleþinkelio taikmenys. Riedmenys. Apsaugos nuo elektros 

pavojø priemonës 

K (47 Lt) 

LST EN 50153:2003/P:2010 en 

Geleþinkelio taikmenys. Riedmenys. Apsaugos nuo elektros 

pavojø priemonës 

Pakeièia LST EN 50153:2003/P:2003 


Geleþinkelio taikmenys. Riedmenys. Pantografai. 

Charakteristikos ir bandymai. 1 dalis. Geleþinkelio 

magistralës transporto priemoniø pantografai 


LST EN 50206-1:2001/AC:2010, taèiau galutinë 

prieðtaraujanèiø nacionaliniø standartø paskelbimo 

netekusiais galios data nenustatyta 

M (54 Lt) 


Geleþinkelio taikmenys. Riedmenys. Pantografai. 

Charakteristikos ir bandymai. 2 dalis. Metro ir lengvøjø 

geleþinkelio transporto priemoniø pantografai 

Nuo 2013-05-01 pakeièia LST EN 50206-2+AC:2001 

L (51 Lt) 


Geleþinkelio taikmenys. Maitinimo ðaltiniai ir riedmenys. 

Techniniai maitinimo ðaltiniø (pastoèiø) ir riedmenø 

koordinavimo, uþtikrinanèio abipusio jø veikimo 

suderinamumà, kriterijai 

TK 45 ELEKTROS ENERGETIKA 


Elektriniai aparatai deguoniui aptikti ir matuoti. Eksploataciniø 

charakteristikø reikalavimai ir bandymo metodai 

Nuo 2013-06-01 pakeièia LST EN 50104:2002, 

LST EN 50104:2002/A1:2004 

N (56 Lt) 

14 

LST EN 50110-2:2010 en 

Elektriniø árenginiø eksploatavimas. 2 dalis. Nacionaliniai priedai 

Nuo 2013-03-01 pakeièia LST EN 50110-2+AC:2001 

M (54 Lt) 


Vieðøjø skirstomøjø tinklø tiekiamos elektros átampinës 

charakteristikos 


Q (63 Lt) 


Árenginiø, kitokiø nei skystiniai transformatoriai, nuo 1 kV iki 

52 kV ir nuo 250 A iki 2,50 kA kiðtukiniai ávadai 


F (33 Lt) 


Stacionarioji áranga lengvai uþsidegantiems pûkams 

elektrostatiðkai padengti. Saugos reikalavimai 


T (74 Lt) 


Elektriniai aparatai degiosioms ir nuodingosioms dujoms 

arba deguoniui aptikti ir matuoti. Aparatø, kuriuose 

naudojama programinë áranga ir (arba) skaitmeninës 

technologijos, reikalavimai ir bandymai 


N (56 Lt) 


Elektriniai aparatai anglies monoksidui buities patalpose 

aptikti. 1 dalis. Bandymo metodai ir eksploataciniø 

charakteristikø reikalavimai 


L (51 Lt) 


Elektriniai aparatai anglies monoksidui buities patalpose 

aptikti. 2 dalis. Nuolatinio veikimo elektriniai aparatai, skirti 

stacionariajai turistiniø transporto priemoniø ir panaðiø patalpø 

árangai, áskaitant pramoginius laivus. Papildomieji bandymo 

metodai ir eksploataciniø charakteristikø reikalavimai 

G (36 Lt) 


Hidrauliniai kabeliø karpymo átaisai. Átaisai, naudojami 

elektriniuose iki 30 kV vardinës kintamosios átampos 

árenginiuose 

Nuo 2013-04-01 pakeièia LST EN 50340+AC:2002 

N (56 Lt) 


Pagrindinis standartas, taikomas skaièiuojant ir matuojant 

elektromagnetiniø laukø stiprá ir savitàjà sugertosios dozës 

galià, siejamà su belaidþio ryðio sistemø (110 MHz - 40 GHz) 

baziniø radijo ryðio stoèiø ir stacionariøjø galiniø stoèiø 

poveikiu þmonëms 


W (91 Lt) 


Darbuotojø apðvitos elektriniuose ir magnetiniuose laukuose, 

kuriuos kuria pramoninë indukcinio kaitinimo áranga, 

vertinimas 

J (43 Lt) 


Darbuotojø, neðiojanèiø aktyviuosius implantuojamus 

medicininius átaisus, apðvitos elektromagnetiniuose laukuose 

vertinimo procedûra. 1 dalis. Bendrieji dalykai 

R (66 Lt) 


Izoliacinës kopëèios, naudojamos ant þemosios átampos 

elektros árenginiø arba arti jø 

L (51 Lt) 


Skirstomøjø pastoèiø kompaktinës árangos sàrankos 

V (85 Lt)



Oro linijø laidai. Plieniniai-aliumininiai laidai 

N (56 Lt) 

LST EN 60832-1:2010/AC:2010 de 

Darbai esant átampai. Izoliaciniai strypai ir prie jø tvirtinami 

átaisai. 1 dalis. Izoliaciniai strypai (IEC 60832-1:2010) 

LST EN 60832-2:2010/AC:2010 de 

Darbai esant átampai. Izoliaciniai strypai ir prie jø tvirtinami 

átaisai. 2 dalis. Tvirtinamieji átaisai (IEC 60832-2:2010) 


Darbai esant átampai. Átampos aptiktuvai. 3 dalis. Dvipoliai 

þemosios átampos aptiktuvai (IEC 61243-3:2009) 


V (85 Lt) 

TK 46 STOGAI IR STATINIØ HIDROIZOLIACIJA 

LST EN 12311-2:2010 en 

Lankstieji hidroizoliaciniai lakðtai. Tempiamøjø savybiø 

nustatymas. 2 dalis. Plastikiniai ir elastomeriniai 

hidroizoliaciniai stogo dangø lakðtai 

Pakeièia LST EN 12311-2:2003 

E (29 Lt) 


Lankstieji hidroizoliaciniai lakðtai. Siûliø atsparumo ðlijimui 

nustatymas. 2 dalis. Plastikiniai ir elastomeriniai 

hidroizoliaciniai stogo dangø lakðtai 


E (29 Lt) 

TK 47 INFORMACIJA IR DOKUMENTAVIMAS 


Filmø identifikavimas. Metaduomenø funkcinio suderinamumo 

pagerinimas. Elementø rinkiniai ir sandaros 

R (66 Lt) 

TK 49 LIEJININKYSTË 


Liejimo maðinos. Kauðø, pylimo árangos, iðcentrinio liejimo 

maðinø, tolydþiojo ir pusiau tolydaus liejimo maðinø saugos 

reikalavimai 


R (66 Lt) 


Varis ir vario lydiniai. Besiûliai, apskritojo skerspjûvio variniai 

oro kondicionavimo ir auðinimo vamzdþiai. 1 dalis. Vamzdynø 

sistemø vamzdþiai 


LST EN 12735-1:2002/A1:2005 

K (47 Lt) 


Varis ir vario lydiniai. Besiûliai, apskritojo skerspjûvio variniai 

oro kondicionavimo ir auðinimo vamzdþiai. 2 dalis. Árangos 

vamzdþiai 

Pakeièia LST EN 12735-2:2002/A1:2005, 

LST EN 12735-2:2002 

L (51 Lt) 


Varis ir vario lydiniai. Bismuto kiekio nustatymas. 2 dalis. 

Liepsnos atominës absorbcinës spektrometrijos metodas 

Pakeièia LST CEN/TS 14938-2:2006 

F (33 Lt) 


Varis ir vario lydiniai. Nikelio kiekio nustatymas. 3 dalis. 



G (36 Lt) 


Varis ir vario lydiniai. Magnio kiekio nustatymas. Liepsnos 

atominës absorbcinës spektrometrijos metodas 

Pakeièia LST CEN/TS 15025:2007 

F (33 Lt) 


Varis ir vario lydiniai. Optinë emisinë spektrometrija, taikant 

induktyviai susietà plazmà 


T (74 Lt) 


Varis ir vario lydiniai. Sidabro kiekio nustatymas. Liepsnos 


H (40 Lt) 


Varis ir vario lydiniai. Telûro kiekio nustatymas. 2 dalis. Telûro 

vidutinio kiekio nustatymas. Liepsnos atominës absorbcinës 

spektrometrijos metodas 

E (29 Lt) 


Aliuminio ir jo lydiniø anodavimas. Anodiniø oksidiniø dangø 

sugerties gebos netekties po sutankinimo nustatymas. Daþø 

laðø bandymas apdorojus rûgðtimi (ISO 2143:2010) 


D (27 Lt) 


Aliuminio ir jo lydiniø anodavimas. Sutankintø anodiniø 

oksidiniø dangø kokybës vertinimas matuojant pilnutiná laidá 



D (27 Lt) 


Aliuminio ir jo lydiniø anodavimas. Sutankintø anodiniø 

oksidiniø dangø kokybës vertinimas matuojant masës netektá 

po panardinimo á fosforo ir chromo rûgðties tirpalà 


Pakeièia LST EN 12373-6:2001, LST EN 12373-7:2003 

E (29 Lt) 


Aliuminio ir jo lydiniø anodavimas. Spalvotø anodiniø oksidiniø 

dangø palyginamojo atsparumo ultravioletinei spinduliuotei ir 

karðèiui nustatymas (ISO 6581:2010) 


C (23 Lt) 


Aliuminio ir aliuminio lydiniø anodavimas. Aliuminio anodiniø 

oksidiniø dangø bendrieji techniniai reikalavimai 



M (54 Lt) 

TK 50 ÐILDYMO IR VËDINIMO SISTEMOS 


Pastatø vëdinimas. Gyvenamøjø pastatø vëdinimo 

komponentø ir (arba) gaminiø eksploataciniø charakteristikø 

bandymai. 2 dalis. Galiniai oro iðtraukimo ir tiekimo átaisai 


L (51 Lt) 


Centralizuoto ðilumos tiekimo ið anksto neardomai izoliuotø 

vamzdþiø sistemø projektavimas ir árengimas 

Pakeièia LST EN 13941:2009, 

LST EN 13941:2009/AC:2010 


15



Ventiliatoriai. Aiðkinamasis þodynas ir kategorijø apibrëþtys 


Pakeièia LST EN ISO 13349:2009 

T (74 Lt) 

TK 52 AKIØ OPTIKA 

LST EN ISO 8596:2009 lt 

Oftalmologinë optika. Regos aðtrumo tikrinimas. Standartinis 

optotipas ir jo pateikimas (ISO 8596:2009) 

E (29 Lt) 

LST EN ISO 11810-1:2009 lt 

Lazeriai ir lazerinë áranga. Chirurginiø apklotø ir (arba) pacientø 

apsauginiø apdangalø atsparumo lazerio spinduliuotei 

bandymo metodas ir klasifikavimas. 1 dalis. Pirminis 

uþsidegimas ir spinduliuotës ásiskverbimas (ISO 11810-1:2005) 

J (43 Lt) 

LST EN ISO 11810-2:2009 lt 

Lazeriai ir lazerinë áranga. Chirurginiø apklotø ir (arba) 

pacientø apsauginiø apdangalø atsparumo lazerio 

spinduliuotei bandymo metodas ir klasifikavimas. 2 dalis. 

Antrinis uþsidegimas (ISO 11810-2:2007) 

J (43 Lt) 

LST EN ISO 11990-2:2010 en 

Lazeriai ir lazerinë áranga. Trachëjiniø vamzdeliø atsparumo 

lazerio spinduliuotei nustatymas. 2 dalis. Trachëjiniø 

vamzdeliø balionëliai (ISO 11990-2:2010) 

H (40 Lt) 

TK 53 AVALYNË IR ODA 


Avalynë. Bandymo metodas apibûdinti tampriàsias 

medþiagas. Tempiamosios charakteristikos (ISO 10765:2010) 

E (29 Lt) 


Avalynë. Bandymo metodas nustatyti avalynës tampriøjø 

medþiagø atsparumà kartotiniam tempimui. Atsparumas 

varginimui (ISO 10768:2010) 

D (27 Lt) 

TK 54 PAGALBOS PRIEMONËS ASMENIMS SU NEGALIA 

LST EN 12006-2:2000+A1:2009 lt 

Neaktyvieji chirurginiai implantai. Ypatingieji reikalavimai, 

keliami ðirdies ir kraujagysliø implantams. 2 dalis. 

Kraujagysliø protezai, áskaitant stambiøjø ðirdies arterijø 

protezus su voþtuvu 

G (36 Lt) 

LST EN 12006-3:2000+A1:2009 lt 

Neaktyvieji chirurginiai implantai. Ypatingieji reikalavimai, 

keliami ðirdies ir kraujagysliø implantams. 3 dalis. Vidiniai 

kraujagysliø átaisai 

G (36 Lt) 

TK 56 NAFTOS PRAMONËS ÁRENGINIAI 

LST EN 1591-1:2002+A1:2009/AC:2010 en 

Jungës ir jø jungtys. Jungèiø su þiedinëmis jungëmis ir 

tarpikliais projektavimo taisyklës. 1 dalis. Skaièiavimo metodas 

LST EN 12972:2007 lt 

Talpyklos pavojingiems kroviniams veþti. Metaliniø cisternø 

bandymas, tikrinimas ir þenklinimas 

Q (63 Lt) 


Talpyklos pavojingiems kroviniams veþti. Metaliniø cisternø 

bandymas, tikrinimas ir þenklinimas 


Skysèio siurbliai ir siurbliniai agregatai. Triukðmo bandymo 

taisyklës. 2-asis ir 3-iasis tikslumo laipsniai (ISO 20361:2007) 

N (56 Lt) 

LST EN ISO 20361:2009/AC:2010 lt 



LST EN ISO 20361:2009/P:2010 en 



TK 59 GEOTECHNIKA 


Geosintetika. Duobimo stiprio nustatymas 

E (29 Lt) 


Specialiøjø geotechnikos darbø atlikimas. Grunto 

sutvirtinimas smeigëmis 

V (85 Lt) 

LST EN 15237:2007 lt 

Specialiøjø geotechnikos darbø atlikimas. Vertikalusis 

drenaþas 

U (77 Lt) 


Specialiøjø geotechnikos darbø atlikimas. Vertikalusis 

drenaþas 

TK 68 PLASTIKAI 


Didelio slëgio apdailos laminatai (DSL). Lakðtai 

termoreaktyviøjø dervø pagrindu (paprastai vadinami 

laminatais). 9 dalis. Laminatø su kitokiomis ðerdimis 

klasifikavimas ir techniniai reikalavimai 

G (36 Lt) 


Lanksèiosios akytosios polimerinës medþiagos. Oro srauto 

vertës, esant pastoviam slëgio kryèiui, nustatymas 


Pakeièia LST EN ISO 7231:2001 

G (36 Lt) 

TK 76 SPROGIOSIOS ATMOSFEROS 

LST EN 1710:2006+A1:2008/AC:2010 en 

Poþeminiø kasyklø árenginiai ir komponentai, naudotini 

potencialiai sprogiose atmosferose 

TK 77 LIFTAI 

LST EN 81-40:2009 lt 

Liftø konstravimo ir árengimo saugos taisyklës. Specialieji 

keleiviniai ir krovininiai liftai. 40 dalis. Laiptiniai keltuvai ir 

nuoþulniojo këlimo platformos, skirti sumaþëjusio judumo 

asmenims 

V (85 Lt) 

LST EN 81-40:2009/P:2010 en 

Liftø konstravimo ir árengimo saugos taisyklës. Specialieji 

keleiviniai ir krovininiai liftai. 40 dalis. Laiptiniai keltuvai ir 

nuoþulniojo këlimo platformos, skirti sumaþëjusio judumo 

asmenims 

16


TK 78 MAÐINOS IR ÁRENGINIAI 

LST EN 815:2000+A2:2009 lt 

Beskydþiø ir bestrypiø græþimo maðinø, naudojamø tuneliams 

ir ðachtoms uolienose græþti, sauga. Saugos reikalavimai 

P (61 Lt) 

LST EN 1672-2:2005+A1:2009 lt 

Maisto perdirbimo maðinos. Pagrindinës sàvokos. 2 dalis. 

Higienos reikalavimai 

R (66 Lt) 

LST EN 12547:2001+A1:2009 lt 

Centrifugos. Bendrieji saugos reikalavimai 

T (74 Lt) 

LST EN 12643:2000+A1:2009 lt 

Þemës darbø maðinos. Maðinos su pneumatinëmis padangomis. 

Vairo sistemø reikalavimai (ISO 5010:1992, modifikuotas) 

H (40 Lt) 

LST EN 12643:2000+A1:2009/P:2010 en 

Þemës darbø maðinos. Maðinos su pneumatinëmis 

padangomis. Vairo sistemø reikalavimai (ISO 5010:1992, 

modifikuotas) 


Statybos maðinos. Maðinø su vidiniu elektros maitinimo 

ðaltiniu elektromagnetinis suderinamumas 


S (69 Lt) 


Þemës darbø maðinos. Laboratoriniai apsauginiø 

konstrukcijø bandymai. Techniniai reikalavimai, keliami 

nukrypimà ribojanèiam tûriui (ISO 3164:1995) 

E (29 Lt) 


Þemës darbø maðinos. Patogumo ir valdymo átaisø pasiekimo 

zonos (ISO 6682:1986, áskaitant keitiná Amd.1:1989) 

K (47 Lt) 


Þemës darbø maðinos. Saugos dirþai ir jø tvirtinimo átaisai. 

Eksploataciniai reikalavimai ir bandymai (ISO 6683:2005) 

E (29 Lt) 

LST EN ISO 6683:2008/P:2010 en 

Þemës darbø maðinos. Saugos dirþai ir jø tvirtinimo átaisai. 

Eksploataciniai reikalavimai ir bandymai (ISO 6683:2005) 

TK 79 INFORMACIJOS SAUGUMAS 

LST ISO/IEC 9798-3:2000/A1:2010 en 

Informacijos technologija. Saugumo metodai. Objekto 

tapatumo nustatymas. 3 dalis. Bûdai, naudojant skaitmeniná 

paraðà. 1 keitinys (tapatus ISO/IEC 9798-3:1998/Amd.1:2010) 

D (27 Lt) 

LST ISO/IEC 14888-3:2007/A1:2010 en 

Informacijos technologija. Saugumo metodai. 

Skaitmeniniai paraðai su priedu. 3 dalis. Diskreèiuoju 

logaritmu pagrásti mechanizmai. 1 keitinys. Elipsinës 

kreivës rusiðko, Schnorr, elipsinës kreivës Schnorr ir 

elipsinës kreivës pilno Schnorr skaitmeninio paraðo 

algoritmai (tapatus ISO/IEC 14888-3:2006/Amd.1:2010) 

N (56 Lt) 

TK 80 KELIØ TRANSPORTAS IR TELEMATIKA 


Automatinis transporto priemoniø ir árangos identifikavimas. 

Transporto priemoniø elektroninio registravimo identifikavimas 

(ERI). 1 dalis. Architektûra (ISO 24534-1:2010) 

Pakeièia LST CEN ISO/TS 24534-1:2008 

F (33 Lt) 



Transporto priemoniø elektroninio registravimo identifikavimas 

(ERI). 2 dalis. Veikimo reikalavimai (ISO 24534-2:2010) 


K (47 Lt) 



Transporto priemoniø elektroninio registravimo 

identifikavimas (ERI). 3 dalis. Transporto priemonës 

duomenys (ISO 24534-3:2010) 


Q (63 Lt) 



Transporto priemoniø elektroninio registravimo 

identifikavimas (ERI). 4 dalis. Saugus ryðys, naudojantis 

asimetrinius bûdus (ISO 24534-4:2010) 


X (98 Lt) 

LIETUVOS STANDARTIZACIJOS DEPARTAMENTAS 

LST CEN/TS 16071:2010 en 

Skrydþiø duomenø apdorojimo funkcinis suderinamumas 

(oro eismo kontrolë – oro eismo kontrolë), taikomas pagal 

Bendro Europos dangaus reglamentà. Funkcinio 

suderinamumo reglamentas EC 552 2004 

G (36 Lt) 

LST CWA 16106:2010 en 

Asmeninës apsaugos nuo cheminiø, biologiniø, radiaciniø ir 

branduoliniø (CBRN) pavojø priemonës 

P (61 Lt) 

LST EN 115-2:2010 en 

Eskalatoriø ir judamøjø takø sauga. 2 dalis. Naudojamø 

eskalatoriø ir judamøjø takø saugos gerinimo taisyklës 

P (61 Lt) 


Modernioji techninë keramika. Keraminiai kompozitai. 

Armuojanèiøjø medþiagø bandymo metodai. 7 dalis. Gráþtës 

gijø tempimo stiprio ir tempimo deformacijos nutraukiant 

pasiskirstymo nustatymas aukðtoje temperatûroje 


M (54 Lt) 


Krovininiai statybiniai keltuvai. 1 dalis. Keltuvai su 

prieinamosiomis platformomis 

Pakeièia LST EN 12158-1:2002, LST EN 12158-1:2006 

V (85 Lt) 


Krovininiai statybiniai keltuvai. 2 dalis. Nuoþulnieji keltuvai su 

neprieinamais krovinio perkëlimo átaisais 


LST EN 12158-2:2002/P:2006, LST EN 12158-2:2006 

R (66 Lt) 


Modernioji techninë keramika. Mechaninës keraminiø pluoðtø 

savybës aukðtoje temperatûroje ir nereaktyviojoje aplinkoje. 

Elgsenos esant valkðnumui nustatymas ðaltojo galo metodu 


J (43 Lt) 


Plieninës stacionariosios sandëliavimo sistemos. Terminai ir 

apibrëþtys 

X (98 Lt) 

LST EN ISO 12215-8:2009/AC:2010 en 

Maþieji laivai. Korpuso konstrukcija ir konstrukciniø detaliø 

matmenys. 8 dalis. Vairai. 1 techninë pataisa 

(ISO 12215-8:2009/Cor.1:2010) 

17


LIETUVOS STANDARTIZACIJOS DEPARTAMENTAS 1) 


Aerospace series - Connectors, electrical, circular, coupled 

by threaded ring, fire-resistant or non fire-resistant, operating 

temperatures - 65 °C to 175 °C continuous, 200 °C 

continuous, 260 °C peak - Part 009: Protective cover for 

receptacle - Product standard 


D (27 Lt) 





continuous, 260 °C peak - Part 010: Protective cover for plug 

- Product standard 


D (27 Lt) 

LST EN 2997-011:2010 en 




continuous, 260 °C peak - Part 011: Dummy receptacle - 

Product standard 

Pakeièia LST EN 2997-011:2007 

E (29 Lt) 


Aerospace series - Pipe coupling 8°30' in titanium alloy - 

Thrust wire nuts 


D (27 Lt) 


Aerospace series - Cables, electrical, aircraft use - Test 

methods - Part 307: Corona extinction voltage 


E (29 Lt) 



methods - Part 604: Resistance to dry arc propagation 


G (36 Lt) 



methods - Part 605: Wet short circuit test 


E (29 Lt) 


Aerospace series - Cable outlet accessories for circular and 

rectangular electrical and optical connectors - Part 010: 

Cable outlet, style K, straight, shielded, sealed, for heat 

shrinkable boot - Product standard 

H (40 Lt) 

LST EN 3660-011:2010 en 

Aerospace series - Cable outlet accessories for circular and 

rectangular electrical and optical connectors - Part 011: 

Cable outlet, style K, 90°, shielded, sealed, for heat 

shrinkable boot - Product standard 

H (40 Lt) 


Aerospace series - Aluminium or aluminium alloy conductors 

for electrical cables - Product standard 


D (27 Lt) 


Aerospace series - Requirements and tests on user-applied 

markings on aircraft electrical cables 

F (33 Lt) 


Aerospace series - Bolts, normal bi-hexagonal head, coarse 

tolerance normal shank, long thread, in alloy steel, cadmium 

plated - Classification: 1 100 MPa (at ambient temperature) / 

235°C 


Aerospace series - Inserts, UNJ threads, self-locking, with 

self-broaching keys - Part 001: Installation and removal 

procedure 

F (33 Lt) 



self-broaching keys - Part 002: Design standard 

F (33 Lt) 



self-broaching keys - Part 003: Technical specification 

M (54 Lt) 



self-broaching keys - Part 004: In heat resisting nickel base 

alloy NI-P100HT (Inconel 718), silver plating 

D (27 Lt) 



self-broaching keys - Part 005: In heat resisting nickel base 

alloy NI-P101HT (WASPALOY), silver plating 

D (27 Lt) 



self-broaching keys - Part 006: In heat resisting steel 

FE-PA2601 (A286), MoS 2 coated 

D (27 Lt) 


Aerospace series - Metallic materials - Test methods - 

Constant amplitude fatigue testing 

Q (63 Lt) 


Aerospace series - Quality management systems - Part 003: 

Requirements for Aerospace Quality Management System 

(AQMS) Auditor Training and Qualification 


N (56 Lt) 

LST EN 9110:2010 en 

Quality Management Systems - Requirements for Aviation 

Maintenance Organizations 

Pakeièia LST EN 9110:2006 

R (66 Lt) 


Quality Management Systems - Requirements for Aviation, 

Space and Defence Distributors 


N (56 Lt) 

Parengë Dalia Reginienë 

1) Lietuvos standartizacijos departamento Technikos komisijos nutarimu (2006 m. vasario 24 d. posëdþio protokolas Nr. TKP-6) Europos standartizacijos 

komiteto technikos komiteto AECMA standartø (iðskyrus darniuosius), perimamø kaip Lietuvos standartø, antraðtës neverèiamos á lietuviø kalbà. 

18


NETEKÆ GALIOS LIETUVOS STANDARTAI 

Netekæs galios Lietuvos standartas Vietoj jo galioja 

TK 1 ELEKTRONIKA 

LST EN 140100:2001, LST EN 140100:2001/A1:2002 Atskirasis rûðinis apraðas. LST EN 140100:2008 

Pastovieji maþos galios nevieliniai varþai 

LST EN 60730-2-11+A1+A2+AC:1999, LST EN 60730-2-11+A1+A2+AC:1999/A11:2005 LST EN 60730-2-11:2008 

Buitiniai ir panaðios paskirties automatiniai elektriniai valdymo átaisai. 2 dalis. 

Ypatingieji reikalavimai elektros energijos reguliatoriams (IEC 60730-2-11:1993) 

LST EN 60730-2-13+A1+AC:2000, LST EN 60730-2-13+A1+AC:2000/A11:2005, LST EN 60730-2-13:2008 

LST EN 60730-2-13+A1+AC:2000/A2:2002 Buitiniai ir panaðios paskirties automatiniai 

elektriniai valdymo átaisai. 2 dalis. Ypatingieji reikalavimai drëgmës valdymo átaisams 

(IEC 60730-2-13:1995+A1:1997, modifikuotas) 

LST EN 61290-10-2:2004 Optiniai stiprintuvai. Bandymo metodai. 10-2 dalis. LST EN 61290-10-2:2008 

Daugiakanalio naudojimo parametrai. Impulsinis metodas, naudojant optiná 

stroboskopiná spektro analizatoriø (IEC 61290-10-2:2003) 

LST EN 61300-2-1:2003 Skaiduliniai optiniai sujungimo átaisai ir pasyvieji komponentai. LST EN 61300-2-1:2010 

Pagrindinës bandymø ir matavimø procedûros. 2-1 dalis. Bandymai. Sinusinë vibracija 

(IEC 61300-2-1:2003) 

LST EN 61300-2-12:2006 Skaiduliniai optiniai sujungimo átaisai ir pasyvieji LST EN 61300-2-12:2010 

komponentai. Pagrindinës bandymo ir matavimo procedûros. 2-12 dalis. Bandymai. 

Smûgis (IEC 61300-2-12:2005) 

LST EN 61340-5-1+AC:2002 Elektrostatika. 5-1 dalis. Elektroniniø átaisø apsauga LST EN 61340-5-1:2008 

nuo elektrostatiniø reiðkiniø. Bendrieji reikalavimai (IEC 61340-5-1:1998+AC:1999) 

LST EN 61753-1-1:2002 Skaiduliniø optiniø sujungimo átaisø ir pasyviøjø komponentø LST EN 61753-1:2008 

eksploataciniø charakteristikø standartas. 1-1 dalis. Bendrieji dalykai ir taisyklës. 

Jungiamieji átaisai (jungtys) (IEC 61753-1-1:2000) 

LST EN 62134-1:2003 Skaidulinës optikos komponentø apgaubai. 1 dalis. Bendrasis LST EN 62134-1:2010 

rûðinis apraðas (IEC 62134-1:2002) 

TK 4 INFORMACIJOS TECHNOLOGIJA 

LST ISO/IEC TR 19791:2007 Informacijos technologija. Saugumo metodai. Operaciniø – 

sistemø saugumo ávertinimas (tapatus ISO/IEC TR 19791:2006) 

TK 5 ELEKTROTECHNIKA 

LST EN 60664-5:2004 Þemosios átampos sistemø árangos izoliacijos parinktis. 5 dalis. LST EN 60664-5:2008 

Iðsamus 2 mm ir maþesniø ortarpiø ir pavirðinio nuotëkio keliø nustatymo metodas 

(IEC 60664-5:2003) 

LST EN 60695-1-30:2003 Gaisrinio pavojingumo bandymai. 1-30 dalis. Gaisrinio LST EN 60695-1-30:2009 

elektrotechniniø gaminiø pavojingumo ávertinimo vadovas. Iðankstinio parinkimo 

bandymø metodø taikymas (IEC 60695-1-30:2002) 

TK 12 AUTOMOBILIØ KELIAI 

LST EN 1317-1:2001 Kelio aptvarø sistemos. 1 dalis. Terminai ir bendrieji bandymo LST EN 1317-1:2010 

metodø reikalavimai 

LST EN 1317-2:2001, LST EN 1317-2:2001/A1:2006 Apsauginiø kelio atitvarø sistemos. LST EN 1317-2:2010 

2 dalis. Apsauginiø barjerø eksploataciniø parametrø klasës, priimamieji smûginiø 

bandymø kriterijai ir bandymo metodai 

LST EN 1317-3:2001 Apsauginiø kelio atitvarø sistemos. 3 dalis. Smûgio slopintuvø LST EN 1317-3:2010 

eksploataciniø parametrø klasës, priimamieji smûginiø bandymø kriterijai ir bandymo 

metodai 

TK 18 TELEKOMUNIKACIJOS 

LST EN 61023:2002 Jûrø navigacinë ir radijo ryðio áranga bei sistemos. Jûrø laivø LST EN 61023:2008 

greièio ir atstumo matavimo áranga. Reikalavimai, keliami darbinëms charakteristikoms. 

Bandymø metodai ir bûtinieji bandymø rezultatai (IEC 61023:1999) 

19


Netekæs galios Lietuvos standartas 

Vietoj jo galioja 

TK 20 ÞAISLAI, VAIKØ NAUDOJAMI DAIKTAI BEI SPORTO IR AKTYVAUS POILSIO ÁRANGA 

LST EN 14974:2006 Rieduèiø sporto árangos naudotojø reikmenys. Saugos reikalavimai 

ir bandymo metodai 

LST EN 14974:2006+A1:2010 

TK 21 TEKSTILË 

LST EN ISO 105-E05:2007, LST EN ISO 105-E05:2007/AC:2007 Tekstilë. Nusidaþymo 

atsparumo nustatymas. E05 dalis. Nusidaþymo atsparumas dëmëjimui rûgðtimi 

(ISO 105-E05:2006) 

LST EN ISO 105-E05:2010 

TK 22 PRIEÐGAISRINË SAUGA 

LST EN 13823:2002 Statybos gaminiø degumo bandymai. Statybos gaminiai, iðskyrus LST EN 13823:2010 

grindø klojinius, termiðkai veikiami vienu deganèiu objektu 

TK 25 RIÐAMOSIOS MEDÞIAGOS IR SILIKATINIAI DIRBINIAI 

LST 1271-92 Keramzito þvyras ir smëlis. Techninës sàlygos 

– 

LST 1556:2000 Sausieji statybiniai glaistai. Techniniai reikalavimai, klasifikacija, – 

atitikties ávertinimas ir bandymo metodai 

TK 26 TERMOIZOLIACINËS MEDÞIAGOS 

LST EN ISO 12567-1:2002 Ðiluminës langø ir durø charakteristikos. Ðilumos perdavimo LST EN ISO 12567-1:2010 

koeficiento nustatymas karðtosios dëþës metodu. 1 dalis. Langø ir durø deriniai 

(ISO 12567-1:2000) 

TK 28 DUJØ SISTEMOS 

LST EN 30-1-1:2008 Buitiniai dujiniai virimo ir kepimo prietaisai. 1-1 dalis. Sauga. 

Bendrieji reikalavimai 

LST EN 30-1-1:2008+A1:2010 

TK 32 SVEIKATA 

LST EN 60601-2-37:2002, LST EN 60601-2-37:2002/A1:2005, 

LST EN 60601-2-37:2008 

LST EN 60601-2-37:2002/A2:2006 Elektrinë medicinos áranga. 2-37 dalis. Ypatingieji 

saugos reikalavimai, keliami ultragarsinei medicinos diagnostikos ir stebësenos árangai 

(IEC 60601-2-37:2001) 

TK 35 DARBØ SAUGA 

LST EN 14975:2007 Palëpës kopëèios. Reikalavimai, þenklinimas ir bandymai 


LST EN 1938:2002 Asmeninë akiø apsauga. Apsauginiai akiniai, skirti motociklø ir LST EN 1938:2010 

mopedø vairuotojams 

LST EN 354:2003 Asmeninë apsauginë áranga apsaugai nuo kritimo ið aukðèio. LST EN 354:2010 

Saugos dirþø kobiniai 

LST EN 530:1997, LST EN 530:1997/AC:2002 Apsauginiø drabuþiø medþiagos LST EN 530:2010 

atsparumas dilimui. Bandymo metodai 

TK 41 SUVIRINIMAS IR MEDÞIAGOTYRA 

LST EN 13445-1:2009 1 leidimas Nekaitinamieji slëginiai indai. 1 dalis. 

Bendrieji reikalavimai 

LST EN 13445-2:2009 1 leidimas Nekaitinamieji slëginiai indai. 2 dalis. Medþiagos 

LST EN 13445-3:2009 1 leidimas Nekaitinamieji slëginiai indai. 3 dalis. Projektavimas 

LST EN 13445-4:2009 1 leidimas Nekaitinamieji slëginiai indai. 4 dalis. Gamyba 

LST EN 13445-1:2009 2 leidimas 




20



LST EN 13445-5:2009 1 leidimas Nekaitinamieji slëginiai indai. 5 dalis. Tikrinimas 

ir bandymai 

LST EN 13445-6:2009 1 leidimas Nekaitinamieji slëginiai indai. 6 dalis. Slëginiø indø 

ir slëginiø daliø, konstruojamø ið rutulinio grafito lietojo ketaus, projektavimo ir gamybos 

reikalavimai 

LST EN 13445-8:2009 1 leidimas Nekaitinamieji slëginiai indai. 8 dalis. Papildomieji 

reikalavimai, keliami aliuminio ir aliuminio lydiniø slëginiams indams 

Vietoj Vietoj jo galioja jo galioja 




TK 43 GELEÞINKELIØ TRANSPORTAS 

LST EN 13674-2:2006 Geleþinkelio taikmenys. Geleþinkelio kelias. Bëgiai. 2 dalis. LST EN 13674-2:2006+A1:2010 

Ieðmø ir bëgiø sankryþø bëgiai, naudojami kartu su 46 kg/m ir didesnës ilginës masës 

plaèiapadþiais geleþinkelio bëgiais 

LST EN 13674-3:2006 Geleþinkelio taikmenys. Geleþinkelio kelias. Bëgiai. 3 dalis. LST EN 13674-3:2006+A1:2010 

Gretbëgiai 

LST EN 14730-1:2006, LST EN 14730-1:2006/P:2008 Geleþinkelio taikmenys. 

LST EN 14730-1:2006+A1:2010 

Geleþikelio kelias. Termitinis bëgiø suvirinimas. 1 dalis. Suvirinimo procedûros 

patvirtinimas 

LST EN 50153:2003/P:2003 Geleþinkelio taikmenys. Riedmenys. Elektrinës saugos LST EN 50153:2003/P:2010 

priemonës 

LST L ENV 13803-1:2004 Geleþinkelio taikmenys. Projektiniai tiesiamo kelio parametrai. LST EN 13803-1:2010 

1435 mm ir platesnës vëþës kelias. 1 dalis. Tiesus kelias 

TK 45 ELEKTROS ENERGETIKA 

LST EN 60423:2001 Kanalai elektrai árengti. Iðoriniai elektros kanalø skersmenys ir LST EN 60423:2008 

kanalø bei jungiamøjø detaliø sriegiai (IEC 60423:1993, modifikuotas) 

LST EN 61557-6:2000 Þemosios átampos skirstomøjø sistemø, kuriø kintamoji átampa LST EN 61557-6:2008 

nevirðija 1 kV, o nuolatinë átampa 1,5 kV, elektrinë sauga. Prietaisai apsauginëms 

priemonëms tikrinti, matuoti ar stebëti. 6 dalis. Liekamosios srovës átaisai (LSÁ) TT, 

TN ir IT sistemose (IEC 61557-6:1997, modifikuotas) 

LST EN 62271-2:2004 Aukðtosios átampos perjungimo ir valdymo árenginiai. 2 dalis. LST EN 62271-207:2008 

Seisminio tinkamumo tikrinimas, kai vardinë átampa 72,5 kV arba aukðtesnë 

(IEC 62271-2:2003) 

TK 46 STOGAI IR STATINIØ HIDROIZOLIACIJA 

LST EN 12311-2:2003 Lanksèiosios hidroizoliacinës juostos. Atsparumo tempimui LST EN 12311-2:2010 

nustatymas. 2 dalis. Plastikinës ir guminës hidroizoliacinës stogø juostos 

LST EN 12317-2:2002 Lanksèios hidroizoliacinës juostos. Sujungimø atsparumo LST EN 12317-2:2010 

kirpimui nustatymas. 2 dalis. Plastikinës ir guminës hidroizoliacinës stogø juostos 

TK 49 LIEJININKYSTË 

LST CEN/TS 14938-2:2006 Varis ir vario lydiniai. Bismuto kiekio nustatymas. 2 dalis. LST EN 14938-2:2010 

Liepsnos atominës absorbcinës spektrometrijos (LAAS) metodas 

LST CEN/TS 15023-3:2007 Varis ir vario lydiniai. Nikelio kiekio nustatymas. 3 dalis LST EN 15023-3:2010 


LST CEN/TS 15025:2007 Varis ir vario lydiniai. Magnio kiekio nustatymas. Liepsnos LST EN 15025:2010 


LST CEN/TS 15605:2008 Varis ir vario lydiniai. Optinë emisinë spektrometrija, taikant LST EN 15605:2010 

induktyviai susietà plazmà 

LST EN 10332:2004 Magnetinës medþiagos. Nuolatiniø magnetø (magnetiðkai kietø) LST EN 60404-5:2008 

medþiagos. Magnetiniø savybiø matavimo metodai 

LST EN 12373-1:2002 Aliuminis ir aliuminio lydiniai. Anodavimas. 1 dalis. Dekoratyviniø LST EN ISO 7599:2010 

ir apsauginiø anodiniø oksidiniø dangø specifikavimo metodas 

LST EN 12373-4:2000 Aliuminis ir aliuminio lydiniai. Anodavimas. 4 dalis. Rûgðtimi LST EN ISO 2143:2010 

apdorotø anodiniø oksidiniø dangø absorbcinës gebos maþëjimo po sandarinimo 

daþø laðais nustatymas 

LST EN 12373-5:2000 Aliuminis ir aliuminio lydiniai. Anodavimas. 5 dalis. Anodinio LST EN ISO 2931:2010 

oksidavimo dangø sandarinimo kokybës ávertinimas matuojant laidumà 


neapdorotø sandarintø anodiniø oksidiniø dangø kokybës ávertinimas matuojant masës 

maþëjimà po panardinimo á fosforo (chromo) rûgðties tirpalà 

21





apdorotø sandarintø anodiniø oksidiniø dangø kokybës ávertinimas matuojant masës 

maþëjimà po panardinimo á fosforo (chromo) rûgðties tirpalà 

LST EN 12373-8:2000 Aliuminis ir aliuminio lydiniai. Anodavimas. 8 dalis. Spalvotø LST EN ISO 6581:2010 

anodinio oksidavimo dangø atsparumo ultravioletinei spinduliuotei ir karðèiui nustatymas 

LST EN 1247:2004 Liejimo maðinos. Kauðø, pylimo árenginiø, iðcentrinio liejimo maðinø, LST EN 1247:2004+A1:2010 

tolydaus ir pusiau tolydaus liejimo maðinø saugos reikalavimai 

LST EN 12735-1:2002, LST EN 12735-1:2002/A1:2005 Varis ir vario lydiniai. Besiûliai LST EN 12735-1:2010 

apskritojo skerspjûvio variniai oro kondicionavimo ir auðinimo vamzdþiai. 1 dalis. 

Vamzdynø sistemø vamzdþiai 

LST EN 12735-2:2002, LST EN 12735-2:2002/A1:2005 Varis ir vario lydiniai. Besiûliai, LST EN 12735-2:2010 

apskritojo skerspjûvio variniai oro kondicionavimo ir auðinimo vamzdþiai. 2 dalis. 

Árangos vamzdþiai 

TK 50 ÐILDYMO IR VËDINIMO SISTEMOS 

LST EN 13141-2:2004 Pastatø vëdinimas. Gyvenamøjø pastatø vëdinimo komponentø/gaminiø LST EN 13141-2:2010 

eksploataciniø charakteristikø bandymai. 2 dalis. Oro ðalinimo ir tiekimo galiniai átaisai 

LST EN 13941:2009, LST EN 13941:2009/AC:2010 Centralizuoto ðilumos tiekimo 


ið anksto neardomai izoliuotø vamzdþiø sistemø projektavimas ir árengimas 

LST EN ISO 13349:2009 Pramoniniai ventiliatoriai. Aiðkinamasis þodynas ir LST EN ISO 13349:2010 

kategorijø apibrëþtys (ISO 13349:1999) 

TK 68 PLASTIKAI 

LST EN ISO 7231:2001 Lanksèios akytosios polimerinës medþiagos. Oro srauto, LST EN ISO 7231:2010 

pastoviai maþëjant slëgiui, dydþio ávertinimo metodas (ISO 7231:1984) 

TK 78 MAÐINOS IR ÁRENGINIAI 

LST EN 13309:2002 Statybos maðinos. Vidinio elektros energijos tiekimo maðinø LST EN 13309:2010 

elektromagnetinis suderinamumas 

TK 80 KELIØ TRANSPORTAS IR TELEMATIKA 

LST CEN ISO/TS 24534-1:2008 Automatinis transporto priemoniø ir árangos LST EN ISO 24534-1:2010 

identifikavimas. Transporto priemoniø elektroninio registravimo identifikavimas (ERI). 

1 dalis. Architektûra (ISO/TS 24534-1:2007) 



2 dalis. Veikimo reikalavimai (ISO/TS 24534-2:2007) 



3 dalis. Transporto priemonës duomenys (ISO/TS 24534-3:2008) 



4 dalis. Saugus ryðys, naudojantis asimetrinius bûdus (ISO/TS 24534-4:2008) 


LST 1735.4:2001 Elektrotechnikoje vartotini raidiniai simboliai. 4 dalis. Sukiosioms LST EN 60027-4:2008 

elektros maðinoms vartotini dydþiø simboliai [HD 245.4 S1:1987 (IEC 60027-4:1985)] 

LST CEN/TS 1007-7:2007 Modernioji techninë keramika. Keraminiai kompozitai. LST EN 1007-7:2010 

Armuojanèiøjø medþiagø bandymo metodai. 7 dalis. Gráþtës gijø tempiamojo stiprio ir 

tempiamosios deformacijos nutraukiant pasiskirstymo nustatymas aukðtoje temperatûroje 

LST CEN/TS 15365:2006 Modernioji techninë keramika. Mechaninës keraminiø pluoðtø LST EN 15365:2010 

savybës aukðtoje temperatûroje ir nereaktyvioje aplinkoje. Valkðnumo elgsenos 

nustatymas ðaltojo galo metodu 

LST EN 12158-1:2002 en, LST EN 12158-1:2006 lt Krovininiai statybiniai keltuvai. 

LST EN 12158-1:2000+A1:2010 

1 dalis. Keltuvai su prieinamosiomis platformomis 

LST EN 12158-2:2002 en, LST EN 12158-2:2002/P:2006 en, LST EN 12158-2:2006 lt LST EN 12158-2:2000+A1:2010 

Krovininiai statybiniai keltuvai. 2 dalis. Nuoþulnieji keltuvai su neprieinamais 

krovinio perkëlimo átaisais 

22




LST EN 3264:2002 Orlaiviai ir erdvëlaiviai. Titano lydinio vamzdþiø sujungimas 8°30’. LST EN 3264:2010 

Verþlë su anga tvirtinimo vielai 

LST EN 3475-307:2006 Orlaiviai ir erdvëlaiviai. Orlaiviuose naudojami elektros LST EN 3475-307:2010 

kabeliai. Bandymo metodai. 307 dalis. Vainikinio iðlydþio gesinimo átampa 

LST EN 3475-604:2003 Orlaiviuose naudojami elektros kabeliai. Bandymo metodai. LST EN 3475-604:2010 

604 dalis. Atsparumas sausojo lanko susidarymui 

LST EN 3475-605:2003 Orlaiviuose naudojami elektros kabeliai. Bandymo metodai. LST EN 3475-605:2010 

605 dalis. Ðlapio trumpojo jungimo bandymas 

LST EN 3719:2006 Orlaiviai ir erdvëlaiviai. Elektros kabeliø aliumininiai arba aliuminio LST EN 3719:2010 

lydinio laidai. Gaminio standartas 

LST EN 61157:2001 Medicininio diagnostinio ultragarso árenginio akustinës iðëjimo LST EN 61157:2008 

galios deklaravimo reikalavimai (IEC 61157:1992) 

LST EN 61689:2001 Ultragarsas. Fizioterapijos sistemos. Eksploataciniai reikalavimai ir LST EN 61689:2008 

nuo 0,5 MHz iki 5 MHz daþniø srities matavimo metodai (IEC 61689:1996) 

LST ISO 2575+A1+A2:2006, LST ISO 2575+A1+A2:2006/A3:2009, LST ISO 2575:2010 

LST ISO 2575+A1+A2:2006/A4:2009 Keliø transporto priemonës. Valdytuvø, rodytuvø 

ir signaliniø lempuèiø simboliai (tapatus ISO 2575:2004+Amd.1:2005+Amd.2:2006) 

LIETUVOS STANDARTIZACIJOS DEPARTAMENTAS 1) 

LST EN 2997-009:2007 Aerospace series - Connectors, electrical, circular, coupled by LST EN 2997-009:2010 

threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 

175 °C continuous, 200 °C continuous, 260 °C peak - Part 009: Protective cover for 

receptacle - Product standard 

LST EN 2997-010:2007 Aerospace series - Connectors, electrical, circular, coupled by LST EN 2997-010:2010 


175 °C continuous, 200 °C continuous, 260 °C peak - Part 010: Protective cover for 

plug - Product standard 

LST EN 2997-011:2007 Aerospace series - Connectors, electrical, circular, coupled by LST EN 2997-011:2010 


175 °C continuous, 200 °C continuous, 260 °C peak - Part 011: Dummy receptacle - 

Product standard 

LST EN 9104-003:2009 Aerospace series - Quality management systems - Part 003: LST EN 9104-003:2010 

Requirements for Aerospace Quality Management System (AQMS) Auditor Training 

and Qualification 

LST EN 9110:2006 Aerospace series - Quality systems - Model for quality assurance LST EN 9110:2010 

applicable to maintenance organizations 

LST EN 9120:2006 Aerospace series - Quality management systems - Requirements LST EN 9120:2010 

for stockist distributors (based on ISO 9001:2000) 

Parengë Dalia Reginienë 

1) Lietuvos standartizacijos departamento Technikos komisijos nutarimu (2006 m. vasario 24 d. posëdþio protokolas Nr. TKP-6) Europos standartizacijos 

komiteto technikos komiteto AECMA standartø (iðskyrus darniuosius), perimamø kaip Lietuvos standartø, antraðtës neverèiamos á lietuviø kalbà. 

23


NETEKSIANTYS GALIOS LIETUVOS STANDARTAI 

Lietuvos standartizacijos departamento Technikos komisijos nutarimu (2010 m. spalio 15 d. posëdþio 

protokolas Nr. TKP-27) nuo 2011 m. sausio 3 d. skelbiami neteksianèiais galios šie Lietuvos standartai. 

Neteksiantis galios Lietuvos standartas 

Vietoj jo taikytinas Lietuvos standartas 

LST EN 12708:2002 Nuo 20 l iki 225 l vardinës talpos plastikiniø – 

talpyklø uþdoriø su ásukamaisiais kamðèiais sistemos 

LST EN 12711:2002 Plieninës statinës. 230 l maþiausios bendrosios – 

talpos statinës su nenuimamuoju (pritvirtintu) dangèiu 

LST EN 209:2001 Plieninës statinës. 210 l maþiausios bendrosios – 

talpos statinës su nuimamuoju dangèiu (atviru virðumi) 

LST EN 210:2001 Plieninës statinës. 216,5 l maþiausios bendrosios – 

talpos statinës su nenuimamuoju (pritvirtintu) dangèiu 

Parengë Vida Julë Jocienë 

* * * 

Lietuvos standartizacijos departamento Technikos komisijos nutarimu (2010 m. lapkrièio 5 d. posëdþio 

protokolas Nr. TKP- 30 ) nuo 2011 m. sausio 3 d. skelbiamas neteksianèiu galios ðis Lietuvos standartas. 

Neteksiantis galios Lietuvos standartas 

Vietoj jo taikytinas Lietuvos standartas 

LST ISO 15161:2003 ISO 9001:2000 taikymo maisto ir gërimø 

pramonëje rekomendacijos (tapatus ISO 15161:2001) 

LST EN ISO 22000:2005 Maisto saugos vadybos 

sistemos. Bet kuriai maisto gamybos grandinës 

organizacijai keliami reikalavimai (ISO 22000:2005) 

Parengë Nerija Tuzinienë 

24


TARPTAUTINIØ IR EUROPOS ÁSTAIGØ 

BEI ORGANIZACIJØ STANDARTAI, KURIUOS 

DEPARTAMENTAS GAVO SPALIO MËN. 

TARPTAUTINËS STANDARTIZACIJOS ORGANIZACIJOS STANDARTAI 

ISO/IEC JTC 1/SC 25 ISO/IEC 14776-121:2010 

Information technology - Small Computer System 

Interface (SCSI) - Part 121: Passive Interconnect 

Performance (PIP) 

ISO/IEC JTC 1/SC 27 ISO/IEC 10118-2:2010 

Information technology - Security techniques - Hashfunctions 

- Part 2: Hash-functions using an n-bit block 

cipher 

ISO/IEC JTC 1/SC 29 ISO/IEC 15444-3:2007/Amd 1:2010 

Information technology - JPEG 2000 image coding 

system: Motion JPEG 2000 - Part 3: - Amendment 1: 

Additional profiles for archiving applications 

ISO/IEC JTC 1/SC 29 ISO/IEC 14496-3:2009/Amd 2:2010 

Information technology - Coding of audio-visual objects 

- Part 3: Audio - Amendment 2: ALS simple profile and 

transport of SAOC 

ISO/IEC JTC 1/SC 29 ISO/IEC 23007-1:2010 

Information technology - Rich media user interfaces - 

Part 1: Widgets 

ISO/IEC JTC 1/SC 6 ISO/IEC/IEEE 8802-15-4:2010 

Information technology - Telecommunications and 

information exchange between systems - Local and 

metropolitan area networks - Specific requirements - 

Part 15-4: 

ISO/TC 108/SC 2 ISO 14839-1:2002/Amd 1:2010 

Mechanical vibration - Vibration of rotating machinery 

equipped with active magnetic bearings - Part 1: 

Vocabulary - Amendment 1 

ISO/TC 109 ISO 22967:2010 

Forced draught gas burners 


Forced draught oil burners 

ISO/TC 117 ISO 14694:2003/Amd 1:2010 

Industrial fans - Specifications for balance quality and 

vibration levels - Amendment 1 

ISO/TC 131/SC 5 ISO 10041-1:2010 

Pneumatic fluid power - Electro-pneumatic continuous 

flow control valves - Part 1: Main characteristics to 

include in the supplier’s literature 


Pneumatic fluid power - Electro-pneumatic continuous 

flow control valves - Part 2: Test methods to determine 

main characteristics to include in the supplier’s 

literature 


Pneumatic fluid power - Electro-pneumatic pressure 

control valves - Part 1: Main characteristics to include 

in the supplier’s literature 


Pneumatic fluid power - Electro-pneumatic pressure 

control valves - Part 2: Test methods to determine main 

characteristics to include in the supplier’s literature 

ISO/TC 131/SC 6 ISO 11171:2010 

Hydraulic fluid power - Calibration of automatic 

particle counters for liquids 


Plastics piping systems for hot and cold water 

installations - Chlorinated poly(vinyl chloride) (PVC-C) 

- Part 1: General - Amendment 1 




- Part 2: Pipes - Amendment 1 




- Part 3: Fittings - Amendment 1 




- Part 5: Fitness for purpose of the system - 

Amendment 1 


Public information guidance systems - Part 1: Design 

principles and element requirements for location plans, 

maps and diagrams 

ISO/TC 147/SC 5 ISO 7827:2010 

Water quality - Evaluation of the “ready”, “ultimate” 

aerobic biodegradability of organic compounds in 

an aqueous medium - Method by analysis of dissolved 

organic carbon (DOC) 


Water quality - Sampling - Part 21: Guidance on 

sampling of drinking water distributed by tankers or 

means other than distribution pipes 

ISO/TC 161 ISO 23551-4:2005/Amd 1:2010 

Safety and control devices for gas burners and 

gas-burning appliances - Particular requirements - 

Part 4: Valve-proving systems for automatic shut-off 

valves - Amendment 1: Application guidance for the 

valve-proving system 

ISO/TC 163/SC 1 ISO 12567-1:2010/Cor 1:2010 

Thermal performance of windows and doors - 

Determination of thermal transmittance by the hotbox 

method - Part 1: Complete windows and doors - 

Technical Corrigendum 1 


Metallic materials - Rotating bar bending fatigue testing 


Ophthalmic optics - Contact lenses and contact lens 

care products - Determination of preservative uptake 

and release 

ISO/TC 184/SC 4 ISO 10303-50:2002/Cor 1:2010 

Industrial automation systems and integration - 

Product data representation and exchange - Part 50: 

Integrated generic resource: Mathematical constructs 

- Technical Corrigendum 1 


Safety of machinery - General principles for design - 

Risk assessment and risk reduction 

25


ISO/TC 205 ISO 16484-1:2010 

Building automation and control systems (BACS) - 

Part 1: Project specification and implementation 

ISO/TC 211 ISO 19146:2010 

Geographic information - Cross-domain vocabularies 

ISO/TC 213 ISO 3611:2010 

Geometrical product specifications (GPS) - 

Dimensional measuring equipment: Micrometers for 

external measurements - Design and metrological 

characteristics 


Geometrical product specifications (GPS) - 

Dimensional measuring equipment: Dial test indicators 

(lever type) - Design and metrological characteristics 

ISO/TC 215 IEC 80001-1:2010 

Application of risk management for IT-networks 

incorporating medical devices - Part 1: Roles, 

responsibilities and activities 

ISO/TC 23/SC 19 ISO 11783-6:2010 

Tractors and machinery for agriculture and forestry - 

Serial control and communications data network - 

Part 6: Virtual terminal 


Petroleum products - Determination of sulfated ash in 

lubricating oils and additives 


Petroleum and related products - Determination of 

the ageing behaviour of inhibited oils and fluids using 

the TOST test - Part 3: Anhydrous procedure for 

synthetic hydraulic fluids 

ISO/TC 34/SC 11 ISO 27608:2010 

Animal and vegetable fats and oils - Determination of 

Lovibond® colour - Automatic method 

ISO/TC 34/SC 5 ISO/TS 15495:2010 

Milk, milk products and infant formulae - Guidelines 

for the quantitative determination of melamine and 

cyanuric acid by LC-MS/MS 

ISO/TC 34/SC 9 ISO/TS 22117:2010 

Microbiology of food and animal feeding stuffs - 

Specific requirements and guidance for proficiency 

testing by interlaboratory comparison 


Paints and varnishes - Modelling of biocide release 

rate from antifouling paints by mass-balance 

calculation 


Language resource management - Word 

segmentation of written texts - Part 1: Basic concepts 

and general principles 


Language resource management - Syntactic 

annotation framework (SynAF) 


Acoustics - Audiometric test methods - Part 1: Puretone 

air and bone conduction audiometry 


Welding consumables - Tubular cored electrodes and 

rods for gas shielded and non-gas shielded metal arc 

welding of stainless and heat-resisting steels - 

Classification 


Gas welding equipment - Pressure regulators for 

manifold systems used in welding, cutting and allied 

processes up to 30 MPa (300 bar) 


Rubber - General procedures for preparing and 

conditioning test pieces for physical test methods 


Rubber compounding ingredients - Carbon black - 

Determination of individual pellet crushing strength 

ISO/TC 45/SC 3 ISO/TR 16314:2010 

Rubber - Measurement of the aromaticity of oil in 

reclaimed rubbers 


Elastomeric seismic-protection isolators - Part 1: Test 

methods 


Elastomeric seismic-protection isolators - Part 2: 

Applications for bridges - Specifications 


Elastomeric seismic-protection isolators - Part 3: 

Applications for buildings - Specifications 


Gas cylinders - Cylinder bundles - Design, 

manufacture, testing and inspection 


Plastics - Methods of test for the determination of the 

effects of immersion in liquid chemicals 


Plastics - Artificial weathering including acidic 

deposition 


Guidance for the use of repeatability, reproducibility 

and trueness estimates in measurement uncertainty 

estimation 


Anodizing of aluminium and its alloys - Measurement 

of specular reflectance and specular gloss of anodic 

oxidation coatings at angles of 20 degrees, 

45 degrees, 60 degrees or 85 degrees 


Cork wallcoverings in rolls - Specifications 


Wood-based panels - Particleboard - Part 2: 

Requirements 


Wood-based panels - Dry-process fibreboard - Part 2: 

Requirements 

ISO/TC 92/SC 1 ISO 11925-2:2010 

Reaction to fire tests - Ignitability of products subjected 

to direct impingement of flame - Part 2: Single-flame 

source test 

ISO/TC 96/SC 6 ISO/TR 19961:2010 

Cranes - Safety code on mobile cranes 

ISO/TMB/WG SR ISO 26000:2010 

Guidance on social responsibility 

26


TARPTAUTINËS ELEKTROTECHNIKOS KOMISIJOS STANDARTAI 

IEC IEC GUIDE 117:2010 

Electrotechnical equipment - Temperatures of 

touchable hot surfaces 

TC 1 IEC 60050-445:2010 

International Electrotechnical Vocabulary - Part 445: 

Time relays 

TC 17 IEC/TR 61439-0:2010 

Low-voltage switchgear and controlgear assemblies 

- Part 0: Guide to specifying assemblies 

TC 2 IEC 60034-18-32:2010 

Rotating electrical machines - Part 18-32: Functional 

evaluation of insulation systems - Test procedures for 

form-wound windings - Evaluation by electrical 

endurance 

TC 3 IEC/TS 62666:2010 

Guidelines for the inclusion of documentation aspects 

in product standards 


Explosive atmospheres - Part 13: Equipment 

protection by pressurized room ‘p’ 

TC 46 IEC 61169-14:2010 

Radio-frequency connectors - Part 14: R.F. coaxial 

connectors with inner diameter of outer conductor 

12 mm with screw coupling – Characteristic 

impedance 75 ohms (Type 3,5/12) 

TC 47 IEC/TR 62433-2-1:2010 

EMC IC modelling - Part 2-1: Theory of black box 

modelling for conducted emission 


Quartz crystal units of assessed quality - Part 3: 

Standard outlines and lead connections 

TC 49 IEC 60444-11:2010 

Measrurement of quartz crystal unit parameters - 

Part 11: Standard method for the determination of 

the load resonance frequency fL and the effective 

load capacitance CLeff using automatic network 

analyzer techniques and error correction 

TC 61 IEC 60335-2-103-am1:2010 

Amendement 1 - Household and similar electrical 

appliances - Safety - Part 2-103: Particular 

requirements for drives for gates, doors and Windows 


Alarm systems - Intrusion and hold-up systems - Part 2-2: 

Intrusion detectors - Passive infrared detectors 


Alarm systems - Intrusion and hold-up systems - Part 3: 

Control and indicating equipment 


Alarm systems - Intrusion and hold-up systems - Part 4: 

Warning devices 


Alarm systems - Intrusion and hold-up systems - Part 5-3: 

Interconnections - Requirements for equipment using 

radio frequency techniques 


Fibre optic interconnecting devices and passive 

components - Basic test and measurement procedures 

- Part 2-9: Tests - Shock 


Fire hazard testing - Part 2-12: Glowing/hot-wire based 

test methods - Glow-wire flammability index (GWFI) 

test method for materials 


Fire hazard testing - Part 2-13: Glowing/hot-wire based 

test methods - Glow-wire ignition temperature (GWIT) 

test method for materials 


Fibre optic interconnecting devices and passive 

components - Basic test and measurement procedures 

- Part 2-47: Tests - Thermal shocks 

TC 86 IEC 61400-1-am1:2010 

Amendment 1 - Wind turbines - Part 1: Design 

requirements 


Electric traction - Rotating electrical machines for rail 

and road vehicles - Part 1: Machines other than 

electronic converter-fed alternating current motors 


Electric traction - Rotating electrical machines for rail 

and road vehicles - Part 2: Electronic converter-fed 

alternating current motors 

27


RATIFIKUOTI EUROPOS STANDARTIZACIJOS KOMITETO STANDARTAI 

Ratifikuoti Europos standartai neturi Europos standartø statuso, 

jei jie neperimti kaip Lietuvos standartai. 

ASD-STAN EN 4657:2010 

Aerospace series - Steel FE-PM1507 

(X1CrNiMoAlTi12-11-2) - Vacuum induction melted 

and consumable electrode remelted - Solution treated 

and precipitation remelted - Bars - a or D ≤ 200 mm - 

Rm ≥ 1 650 MPa 

ASD/ELEC EN 3155-026:2010 

Aerospace series - Electrical contacts used in 

elements of connection - Part 026: Contacts, electrical, 

male, type A, crimp, class R - Product standard 

ASD/MAT EN 3238:2010 

Aerospace series - Metallic materials - Test method - 

Shear test for wires and rivets 

ASD/MAT EN 4700-004:2010 

Aerospace series - Steel and heat resisting alloys - Wrought 

products - Technical specification - Part 004: Wire 

ASD/MAT EN 4700-007:2010 

Aerospace series - Steel and heat resisting alloys - 

Wrought products - Technical specification - Part 007: 

Remelting stock 

ASD/MECH EN 3274:2010 

Aerospace series - Pipe coupling 8°30’ - Thread end 

- Geometric configuration 


Aerospace series - Pins, quick release, single and 

double acting - Technical specification 


Aerospace series - Nuts, bihexagonal, self-locking, 

with counterbore, in heat resisting steel, passivated - 

Classification: 1 100 MPa (at ambient temperature) / 

650 °C 

ASD/MECH EN 3911:2010 

Aerospace series - Six lobe recess - Geometrical 

definition 


Aerospace series - Pipe coupling 8°30' in titanium alloy 

- Elbows 45° 


Aerospace series - Pipe coupling 8°30' in titanium alloy 

- Elbows 45°, bulkhead 

ASD/N MAT EN 2133:2010 

Aerospace series - Cadmium plating of steels with 

specified tensile strength ≤ 1 450 MPa, copper, copper 

alloys and nickel alloys 

CEN/SS S02 EN ISO 9187-1:2010 

Injection equipment for medical use - Part 1: Ampoules 

for injectables (ISO 9187-1:2010) 

CEN/SS S02 EN ISO 9187-2:2010 

Injection equipment for medical use - Part 2: Onepoint-cut 

(OPC) ampoules (ISO 9187-2:2010) 

CEN/TC 122 EN ISO 9241-210:2010 

Ergonomics of human-system interaction - Part 210: 

Human-centred design for interactive systems 


CEN/TC 124 EN 14229:2010 

Structural timber - Wood poles for overhead lines 

CEN/TC 126 EN 12354-5:2009/AC:2010 

Building acoustics - Estimation of acoustic 

performance of building from the performance of 

elements - Part 5: Sounds levels due to the service 

equipment 

28 

CEN/TC 132 EN ISO 6719:2010 

Anodizing of aluminium and its alloys - Measurement 

of reflectance characteristics of aluminium surfaces 

using integrating-sphere instruments (ISO 6719:2010) 


Paints and varnishes - Modelling of biocide release 

rate from antifouling paints by mass-balance 

calculation (ISO 10890:2010) 

CEN/TC 144 EN 15811:2009/AC:2010 

Agricultural machinery - Guards for moving parts 

of power transmission - Guard opening with tool 

(ISO/TS 28923:2007 modified) 

CEN/TC 144 EN ISO 4254-1:2009/AC:2010 

Agricultural machinery - Safety - Part 1: General 

requirements (ISO 4254-1:2008) 


Agricultural machinery - Safety - Part 5: Power-driven 

soil-working machines (ISO 4254-5:2008) 


Agricultural machinery - Safety - Part 6: Sprayers and 

liquid fertilizer distributors (ISO 4254-6:2009) 


Agricultural machinery - Safety - Part 7: Combine 

harvesters, forage harvesters and cotton harvesters 

(ISO 4254-7:2008) 


Agricultural machinery - Safety - Part 10: Rotary 

tedders and rakes (ISO 4254-10:2009) 

CEN/TC 148 EN 619:2002+A1:2010 

Continuous handling equipment and systems - Safety 

and EMC requirements for equipment for mechanical 

handling of unit loads 


Plastics piping systems - Glass-reinforced 

thermosetting plastics (GRP) pipes - Determination of 

long-term resistance to internal pressure 


Plastics piping systems for water supply and for buried 

and above-ground drainage and sewerage under 

pressure - Unplasticized poly(vinyl chloride) (PVC-U) 

- Part 3: Fittings (ISO 1452-3:2009, corrected 

version 2010-03-01) 


Plastics piping systems for water supply and for buried 

and above-ground drainage and sewerage under 

pressure - Unplasticized poly(vinyl chloride) (PVC-U) - 

Part 5: Fitness for purpose of the system (ISO 1452-5:2009, 

corrected version 2010-03-01) 

CEN/TC 162 EN ISO 13982-1:2004/A1:2010 

Protective clothing for use against solid particulates - 

Part 1: Performance requirements for chemical 

protective clothing providing protection to the full body 

against airborne solid particulates (type 5 clothing) - 

Amendment 1 (ISO 13982-1:2004/AM 1:2010) 


Wood flooring - Determination of resistance to 

indentation - Test method 


Petroleum and related products - Determination of 

the ageing behaviour of inhibited oils and fluids using 

the TOST test - Part 3: Anhydrous procedure for 

synthetic hydraulic fluids (ISO 4263-3:2010)


CEN/TC 192 CEN/TR 16099:2010 

Fire service equipment - Summary of water pressures 

specified in published CEN/TC 192 standards 


Tannery machines - Reciprocating roller machines - 

Safety requirements 


Aerosol drug delivery device design verification - 

Requirements and test methods (ISO 20072:2009) 


Hardware for furniture - Strength and durability of 

hinges and their components - Stays and hinges 

pivoting on a horizontal axis 


Anaesthetic and respiratory equipment - Noninterchangeable 

screw-threaded (NIST) low-pressure 

connectors for medical gases 

CEN/TC 215 EN ISO 8835-3:2009/A1:2010 

Inhalational anaesthesia systems - Part 3: Transfer 

and receiving systems of active anaesthetic gas 

scavenging systems (ISO 8835-3:2007/AMD 1:2010) 

CEN/TC 237 EN 12405-1:2005+A2:2010 

Gas meters - Conversion devices - Part 1: Volume 

conversion 


Gas meters - Smart Gas Meters 

CEN/TC 247 EN 14908-6:2010 

Open Data Communication in Building Automation, 

Controls and Building Management - Control Network 

Protocol - Part 6: Application elements 


Textiles - Quantitative chemical analysis - Part 1: 

General principles of testing (ISO 1833-1:2006, 

including Cor 1:2009) 



Ternary fibre mixtures (ISO 1833-2:2006) 



Mixtures of acetate and certain other fibres (method 

using acetone) (ISO 1833-3:2006) 



Mixtures of certain protein and certain other fibres 

(method using hypochlorite) (ISO 1833-4:2006) 



Mixtures of viscose, cupro or modal and cotton fibres 

(method using sodium zincate) (ISO 1833-5:2006) 



Mixtures of viscose or certain types of cupro or modal 

or lyocell and cotton fibres (method using formic acid 

and zinc chloride) (ISO 1833-6:2007) 



Mixtures of polyamide and certain other fibres (method 

using formic acid) (ISO 1833-7:2006) 



Mixtures of acetate and triacetate fibres (method using 

acetone) (ISO 1833-8:2006) 



Mixtures of acetate and triacetate fibres (method using 

benzyl alcohol) (ISO 1833-9:2006) 



Mixtures of triacetate or polylactide and certain 

other fibres (method using dichloromethane) 

(ISO 1833-10:2006) 

CEN/TC 248 EN ISO 1833-11:2010 

Textiles - Quantitative chemical analysis - Part 11: 

Mixtures of cellulose and polyester fibres (method 

using sulfuric acid) (ISO 1833-11:2006) 



Mixtures of acrylic, certain modacrylics, certain 

chlorofibres, certain elastanes and certain other fibres 

(method using dimethylformamide) (ISO 1833-12:2006) 


Textiles - Quantitative chemical analysis - Part 13: Mixtures 

of certain chlorofibres and certain other fibres (method 

using carbon disulfide/acetone) (ISO 1833-13:2006) 



Mixtures of acetate and certain chlorofibres (method 

using acetic acid) (ISO 1833-14:2006) 



Mixtures of jute and certain animal fibres (method by 

determining nitrogen content) (ISO 1833-15:2006) 



Mixtures of polypropylene fibres and certain other 

fibres (method using xylene) (ISO 1833-16:2006) 



Mixtures of chlorofibres (homopolymers of vinyl 

chloride) and certain other fibres (method using 

sulfuric acid) (ISO 1833-17:2006) 



Mixtures of silk and wool or hair (method using sulfuric 

acid) (ISO 1833-18:2006) 



Mixtures of cellulose fibres and asbestos (method by 

heating) (ISO 1833-19:2006) 



Mixtures of elastane and certain other fibres (method 

using dimethylacetamide) (ISO 1833-20:2009) 



Mixtures of chlorofibres, certain modacrylics, certain 

elastanes, acetates, triacetates and certain other fibres 

(method using cyclohexanone) (ISO 1833-21:2006) 


Plastics - Methods of test for the determination of the 

effects of immersion in liquid chemicals (ISO 175:2010) 

CEN/TC 250 EN 1996-1-2:2005/AC:2010 

Eurocode 6 - Design of masonry structures - Part 1-2: 

General rules - Structural fire design 


Railway applications - Axleboxes - Rolling bearings 


Railway applications - Axleboxes - Lubricating greases 


Railway applications - Axleboxes - Performance testing 


Railway applications - Wheelsets and bogies - Nonpowered 

axles - Design method 

29



Railway applications - Wheelsets and bogies - 

Powered axles - Design method 


Railway applications - Wheelsets and bogies - 

Wheelsets - Product requirements 


Railway applications - Wheelsets and bogies - Axles - 

Product requirements 


Railway applications - Wheelsets and bogies - Wheels 

- Tread profile 


Railway applications - Straight and angled end cocks 

for brake pipe and main reservoir pipe 


Railway applications - Axlebox lubricating greases - 

Part 1: Method to test the ability to lubricate 


Railway applications - Axlebox lubricating greases - 

Part 2: Method to test the mechanical stability to cover 

vehicle speeds up to 200 km/h 


Railway applications - Braking - Distributor valves and 

distributor-isolating devices 


Railway applications - Wheel/rail friction management 

- Flange lubrication 

CEN/TC 256 EN 15611:2008+A1:2010 

Railway applications - Braking - Relay valves 


Railway applications - Braking - Brake pipe accelerator 

valve 


Railway applications - Braking - Empty-loaded 

changeover devices 


Railway applications - Braking - Automatic variable 

load sensing devices 


Railway applications - Braking - Static brake testing 


Fertilizers - Determination of N-(1,2-dicarboxyethyl)- 

D,L-aspartic acid (Iminodisuccinic acid, IDHA) using 

high-performance liquid chromatography (HPLC) 


Glass packaging - Standard tolerances for flaconnage 


Stationary source emissions - Determination of the 

mass concentration of PCDDs/PCDFs and dioxin-like 

PCBs - Part 4: Sampling and analysis of dioxin-like 

PCBs 

CEN/TC 275 EN 15911:2010 

Foodstuffs - Simultaneous determination of nine 

sweeteners by high performance liquid 

chromatography and evaporative light scattering 

detection 


Food analysis - Performance criteria for single 

laboratory validated methods of analysis for the 

determination of mycotoxins 


Characterization of waste - Terminology - Part 2: 

Management related terms and definitions 


Thermal solar systems and components - Solar 

collectors - Part 1: General requirements 


Postal services - Trays for international letter mail - Test 

methods and performance requirements 


Solid biofuels - Terminology, definitions and 

descriptions 


Solid biofuels - Determination of particle size 

distribution - Part 1: Oscillating screen method using 

sieve apertures of 1 mm and above 


Solid biofuels - Determination of particle size 

distribution - Part 2: Vibrating screen method using 

sieve apertures of 3,15 mm and below 


Bitumen and bituminous binders - Bituminous 

emulsions, fluxed and cut-back bitumen factory 

production control 

CEN/WS 045 CWA 16221:2010 

Vehicle security barriers - Performance requirements, 

test methods and guidance on application 

CEN/WS ICT CWA 16213:2010 

End User e-Skills Framework Requirements 

ECISS/TC 101 EN ISO 148-1:2010 

Metallic materials - Charpy pendulum impact test - 

Part 1: Test method (ISO 148-1:2009) 


Steel for the reinforcement and prestressing of 

concrete - Test methods - Part 1: Reinforcing bars, 

wire rod and wire (ISO 15630-1:2010) 



concrete - Test methods - Part 2: Welded fabric 




concrete - Test methods - Part 3: Prestressing steel 


ECISS/TC 109 EN 10169:2010 

Continuously organic coated (coil coated) steel flat 

products - Technical delivery conditions 



concrete - Test methods - Part 1: Reinforcing bars, 

wire rod and wire (ISO 15630-1:2010) 



concrete - Test methods - Part 2: Welded fabric 




concrete - Test methods - Part 3: Prestressing steel 


ECISS/TC 27 EN 10169:2010 

Continuously organic coated (coil coated) steel flat 

products - Technical delivery conditions 

30


RATIFIKUOTI EUROPOS ELEKTROTECHNIKOS STANDARTIZACIJOS 

KOMITETO STANDARTAI 



CLC/BTTF 128-2 EN 50191:2010 

Erection and operation of electrical test 

equipment 

CLC/SC 31-3 EN 60079-25:2010 

Explosive atmospheres - Part 25: Intrinsically safe 

electrical systems (IEC 60079-25:2010) 

CLC/SC 9XB CLC/TS 50206-3:2010 

Railway applications - Rolling stock - 

Pantographs: Characteristics and tests - Part 3: 

Interface between pantograph and rolling stock 

for rail vehicles 

CLC/SC 9XC EN 50122-2:2010 

Railway applications - Fixed installations - Electrical 

safety, earthing and the return circuit - Part 2: 

Provisions against the effects of stray currents 

caused by d.c. traction systems 

CLC/SC 9XC EN 50122-3:2010 

Railway applications - Fixed installations - Electrical 

safety, earthing and the return circuit - Part 3: 

Mutual Interaction of a.c. and d.c. traction systems 

CLC/SR 47 EN 62047-4:2010 

Semiconductor devices - Microelectromechanical 

devices - Part 4: Generic 

specification for MEMS (IEC 62047-4:2008) 


Semiconductor die products - Part 1: 

Procurement and use (IEC 62258-1:2009) 

CLC/SR 47D EN 60191-6-20:2010 

Mechanical standardization of semiconductor 

devices - Part 6-20: General rules for the 

preparation of outline drawings of surface mounted 

semiconductor device packages - Measuring 

methods for package dimensions of small outline 

J-lead packages (SOJ) (IEC 60191-6-20:2010) 

CLC/SR 47D EN 60191-6-21:2010 

Mechanical standardization of semiconductor 

devices - Part 6-21: General rules for the 

preparation of outline drawings of surface mounted 

semiconductor device packages - Measuring 

methods for package dimensions of small outline 

packages (SOP) (IEC 60191-6-21:2010) 

CLC/SR 48B EN 60603-7-71:2010 

Connectors for electronic equipment - Part 7-71: 

Detail specification for 8-way, shielded, free and 

fixed connectors, for data transmission with 

frequencies up to 1 000 MHz (IEC 60603-7-71:2010) 

CLC/SR 56 EN 62508:2010 

Guidance on human aspects of dependability 

(IEC 62508:2010) 

CLC/SR 57 EN 61850-7-2:2010 

Communication networks and systems for power 

utility automation - Part 7-2: Basic information and 

communication structure - Abstract 

communication service interface (ACSI) 


CLC/SR 65B EN 60546-1:2010 

Controllers with analogue signals for use in 

industrial-process control systems - Part 1: 

Methods of evaluating the performance 

(IEC 60546-1:2010) 

CLC/SR 65E EN 62541-3:2010 

OPC unified architecture - Part 3: Address Space 

Model (IEC 62541-3:2010) 


Safety requirements for electrical equipment for 

measurement, control, and laboratory use - 

Part 1: General requirements (IEC 61010-1:2010) 


Safety requirements for electrical equipment for 

measurement, control, and laboratory use - 

Part 2-030: Particular requirements for testing 

and measuring circuits (IEC 61010-2-030:2010) 

CLC/SR 86 EN 62614:2010 

Fibre optics - Launch condition requirements for 

measuring multimode attenuation (IEC 62614:2010) 


Safety of transformers, reactors, power supply 

units and combinations thereof - Part 2-23: 

Particular requirements and tests for transformers 

and power supply units for construction sites 


CLC/TC 108X EN 60065:2002/A2:2010 

Audio, video and similar electronic apparatus - 

Safety requirements (IEC 60065:2001/A2:2010, 

modified) 

CLC/TC 116 EN 60745-1:2009/A11:2010 

Hand-held motor-operated electric tools - Safety 

- Part 1: General requirements 

CLC/TC 116 EN 60745-2-5:2010 


- Part 2-5: Particular requirements for circular 

saws (IEC 60745-2-5:2010, modified) 

CLC/TC 116 EN 60745-2-16:2010 


- Part 2-16: Particular requirements for tackers 

(IEC 60745-2-16:2008, modified) 

CLC/TC 2 EN 60034-1:2010 

Rotating electrical machines - Part 1: Rating and 

performance (IEC 60034-1:2010, modified) 

CLC/TC 209 EN 60728-11:2010 

Cable networks for television signals, sound 

signals and interactive services - Part 11: Safety 

(IEC 60728-11:2010) 

CLC/TC 210 EN 55016-1-1:2010/A1:2010 

Specification for radio disturbance and immunity 

measuring apparatus and methods - Part 1-1: Radio 

disturbance and immunity measuring apparatus - 

Measuring apparatus (CISPR 16-1-1:2010/A1:2010) 

CLC/TC 210 EN 55016-2-3:2010/A1:2010 

Specification for radio disturbance and immunity 

measuring apparatus and methods - Part 2-3: 

Methods of measurement of disturbances and 

immunity - Radiated disturbance measurements 

(CISPR 16-2-3:2010/A1:2010) 

CLC/TC 210 CLC/TR 50538:2010 

Guide to EMC Directive conformity of equipment 

designed for military purposes 


Conduit systems for cable management - Part 24: 

Particular requirements - Conduit systems buried 

underground (IEC 61386-24:2004) 

31


CLC/TC 215 EN 50310:2010 

Application of equipotential bonding and earthing 

in buildings with information technology 

equipment 

CLC/TC 215 EN 62614:2010 

Fibre optics - Launch condition requirements for 

measuring multimode attenuation 

(IEC 62614:2010) 

CLC/TC 21X EN 50272-1:2010 

Safety requirements for secondary batteries and 

battery installations - Part 1: General safety 

information 

CLC/TC 26A EN 60974-11:2010 

Arc welding equipment - Part 11: Electrode 

holders (IEC 60974-11:2010) 

CLC/TC 34Z EN 60061-1:1993/A43:2010 

Lamp caps and holders together with gauges 

for the control of interchangeability and safety - 

Part 1: Lamp caps 




Part 1: Lamp caps 




Part 2: Lampholders 




Part 2: Lampholders 




Part 3: Gauges 




Part 3: Gauges 

CLC/TC 36A EN 50386:2010 

Bushings up to 1 kV and from 250 A to 5 kA, for 

liquid filled transformers 

CLC/TC 40XA EN 60384-26:2010 

Fixed capacitors for use in electronic equipment 

- Part 26: Sectional specification - Fixed aluminium 

electrolytic capacitors with conductive polymer 

solid electrolyte (IEC 60384-26:2010) 

CLC/TC 40XA EN 60384-26-1:2010 

Fixed capacitors for use in electronic equipment 

- Part 26-1: Blank detail specification - Fixed 

aluminum electrolytic capacitors with conductive 

polymer solid electrolyte - Assessment level EZ 


CLC/TC 40XA EN 60939-1:2010 

Passive filter units for electromagnetic interference 

suppression - Part 1: Generic specification 


CLC/TC 40XB EN 140401-802:2007/A1:2010 

Detail specification: Fixed low power film SMD 

resistors - Rectangular - Stability classes 1; 2 

CLC/TC 40XB EN 140401-803:2007/A1:2010 

Detail specification: Fixed low power film SMD 

resistors - Cylindrical - Stability classes 0,05; 0,1; 

0,25; 0,5; 1; 2 


Specifications for particular types of winding 

wires - Part 57: Polyamide-imide enamelled round 

copper wire, class 220 (IEC 60317-57:2010) 


Specifications for particular types of winding wires 

- Part 58: Polyamide-imide enamelled rectangular 

copper wire, class 220 (IEC 60317-58:2010) 

CLC/TC 59X EN 50304:2009/A1:2010 

Electric cooking ranges, hobs, ovens and grills 

for household use - Methods for measuring 

performance 

CLC/TC 61 EN 60335-2-25:2002/A11:2010 

Household and similar electrical appliances - 

Safety - Part 2-25: Particular requirements for 

microwave ovens, including combination 

microwave ovens 

CLC/TC 61F EN 60745-2-5:2010 


- Part 2-5: Particular requirements for circular 

saws (IEC 60745-2-5:2010, modified) 

CLC/TC 62 EN 60601-2-33:2010 

Medical electrical equipment - Part 2-33: Particular 

requirements for the basic safety and essential 

performance of magnetic resonance equipment 

for medical diagnosis (IEC 60601-2-33:2010) 

CLC/TC 65CX EN 61158-2:2010 

Industrial communication networks - Fieldbus 

specifications - Part 2: Physical layer specification 

and service definition (IEC 61158-2:2010) 

CLC/TC 65CX EN 61784-1:2010 

Industrial communication networks - Profiles - 

Part 1: Fieldbus profiles (IEC 61784-1:2010) 

CLC/TC 65CX EN 61784-2:2010 

Industrial communication networks - Profiles - 

Part 2: Additional fieldbus profiles for real-time 

networks based on ISO/IEC 8802-3 


CLC/TC 65CX CLC/TR 61158-1:2010 

Industrial communication networks - Fieldbus 

specifications - Part 1: Overview and guidance 

for the IEC 61158 and IEC 61784 series 

(IEC/TR 61158-1:2010) 

CLC/TC 72 EN 60730-2-7:2010 

Automatic electrical controls for household and 

similar use - Part 2-7: Particular requirements for 

timers and time switches (IEC 60730-2-7:2008, 

modified) 

CLC/TC 76 EN 60825-2:2004/A2:2010 

Safety of laser products - Part 2: Safety of 

optical fibre communication systems (OFCS) 

(IEC 60825-2:2004/A2:2010) 


Monitoring and alarm receiving centre - Part 2: 

Technical requirements 

CLC/TC 86A EN 60793-1-41:2010 

Optical fibres - Part 1-41: Measurement 

methods and test procedures - Bandwidth 


32


RATIFIKUOTI EUROPOS TELEKOMUNIKACIJØ STANDARTØ INSTITUTO STANDARTAI 



ETSI EN 300 386 V1.5.1 (2010-10) 

Electromagnetic compatibility and Radio spectrum 

Matters (ERM); Telecommunication network equipment; 

ElectroMagnetic Compatibility (EMC) requirements 

ETSI EN 300 609-4 V9.2.1 (2010-10) 

Global System for Mobile communications (GSM); Part 4: 

Harmonized EN for GSM Repeaters covering the essential 

requirements of article 3.2 of the R&TTE Directive 



Matters (ERM); ElectroMagnetic Compatibility (EMC) 

standard for radio equipment and services; Part 23: 

Specific conditions for IMT-2000 CDMA, Direct Spread 

(UTRA and E-UTRA) Base Station (BS) radio, repeater 

and ancillary equipment 





Specific conditions for IMT-2000 CDMA Direct Spread 

(UTRA and E-UTRA) for Mobile and portable (UE) radio 

and ancillary equipment 





Specific conditions for External Power Supply (EPS) 

for mobile phones 

ETSI EN 301 502 V9.2.1 (2010-10) 

Global System for Mobile communications (GSM); 

Harmonized EN for Base Station Equipment covering the 

essential requirements of article 3.2 of the R&TTE Directive 



Matters (ERM); Short Range Devices (SRD) using Ultra 

WideBand (UWB) technology; Location Tracking 

equipment operating in the frequency range from 

6 GHz to 9 GHz; Part 1: Technical characteristics and 

methods of measurement 



Matters (ERM); Short Range Devices (SRD) using Ultra 

WideBand (UWB) technology; Location Tracking 

equipment operating in the frequency range from 6 GHz 

to 9 GHz; Part 2: Harmonized EN covering the essential 

requirements of article 3.2 of the R&TTE Directive 


Advanced Surface Movement Guidance and Control 

System (A-SMGCS); Part 2: Community Specification 

for application under the Single European Sky 

Interoperability Regulation EC 552/2004 for A-SMGCS 

Level 2 including external interfaces 





Interoperability Regulation EC 552/2004 for a deployed 

cooperative sensor including its interfaces 

ETSI EN 303 213-4-1 V1.1.1 (2010-10) 





non-cooperative sensor including its interfaces; 

Sub-part 1: Generic requirements for non-cooperative 

sensor 

ETSI EN 303 213-4-2 V1.1.1 (2010-10) 





non-cooperative sensor including its interfaces; 

Sub-part 2: Specific requirements for a deployed 

Surface Movement Radar sensor 

ETSI ES 202 765-4 V1.1.1 (2010-10) 

Speech and multimedia Transmission Quality (STQ); 

QoS and network performance metrics and 

measurement methods; Part 4: Indicators for 

supervision of Multiplay services 

ETSI ES 202 874-1 V1.1.1 (2010-10) 

Access, Terminals, Transmission and Multiplexing 

(ATTM); External Common Power Supply for Customer 

Premises Network and Access Equipment; Part 1: 

Functional requirements 

ETSI TR 122 934 V9.1.0 (2010-10) 

Digital cellular telecommunications system (Phase 2+); 

Universal Mobile Telecommunications System (UMTS); 

LTE; Feasibility study on 3GPP system to Wireles Local 

Area Network (WLAN) interworking (3GPP TR 22.934 

version 9.1.0 Release 9) 




LTE; Feasibility study on Location Services (LCS) for 

Wireless Local Area Network (WLAN) interworking 

(3GPP TR 22.935 version 9.1.0 Release 9) 




LTE; Study on a generalized privacy capability 





LTE; Identity management and 3GPP security 

interworking; Identity management and Generic 

Authentication Architecture (GAA) interworking 



Evolved Universal Terrestrial Radio Access (E-UTRA); 

Radio Frequency (RF) system scenarios 




Radio Frequency (RF) system scenarios 




Optimized transmit pulse shape for downlink Enhanced 

General Packet Radio Service (EGPRS2-B) 




Optimized transmit pulse shape for downlink Enhanced 

General Packet Radio Service (EGPRS2-B) 


ETSI TS 101 220 V10.0.0 (2010-10) 

Smart Cards; ETSI numbering system for 

telecommunication application providers (Release 10) 


Smart Cards; ETSI numbering system for 

telecommunication application providers (Release 9) 

33



Smart Cards; UICC-Terminal interface; Physical and 

logical characteristics (Release 6) 










ETSI TS 102 232-5 V2.5.1 (2010-10) 

Lawful Interception (LI); Handover Interface and 

Service-Specific Details (SSD) for IP delivery; Part 5: 

Service-specific details for IP Multimedia Services 


Smart Cards; Smart Card Platform Requirements 

Stage 1 (Release 10) 


Smart Cards; Secure channel between a UICC and an 

end-point terminal (Release 7) 








Smart Cards; UICC-Terminal interface; Characteristics 

of the USB interface (Release 10) 











Smart Cards; UICC - Contactless Front-end (CLF) 

Interface; Host Controller Interface (HCI) (Release 10) 











Lawful Interception (LI); Retained data handling; 

Handover interface for the request and delivery of 

retained data 


Digital Video Broadcasting (DVB); Implementation 

guidelines for a second generation digital terrestrial 

television broadcasting system (DVB-T2) 


Smart Cards; Test Specification for SCWS Application 

Invocation API for Java CardTM; Tests Environment and 

Annexes (Release 7) 


User Group; Quality of Telecom Services; Conformity 

assessment; Requirements for bodies providing QoS 

audits and surveys 


User Group; Quality of ICT Services; Assessment 

process of the QoS parameters of the customer 

relationship stages 



(ATTM); Optical External Network Testing Interface 


Emergency Communications (EMTEL); European 

Public Warning System (EU-ALERT) using the Cell 

Broadcast Service 



(ATTM); Integrated Broadband Cable and Television 

Networks; K-LAD Functional Specification 




LTE; Location Services (LCS); Service description; 

Stage 1 (3GPP TS 22.071 version 9.1.0 Release 9) 



LTE; Service aspects; Service principles 

(3GPP TS 22.101 version 9.8.0 Release 9) 




LTE; Services and service capabilities (3GPP TS 22.105 




Service requirements for Home Node B (HNB) and 

Home eNode B (HeNB) (3GPP TS 22.220 version 9.5.0 

Release 9) 




LTE; Service requirements for the Internet Protocol (IP) 

multimedia core network subsystem (IMS); Stage 1 





LTE; Service requirements for 3GPP Generic User 

Profile (GUP); Stage 1 (3GPP TS 22.240 version 9.1.0 

Release 9) 



LTE; Service requirements for the Evolved 

Packet System (EPS) (3GPP TS 22.278 version 9.6.0 

Release 9) 




LTE; Network architecture (3GPP TS 23.002 





Numbering, addressing and identification 












34





Restoration procedures (3GPP TS 23.007 version 9.5.0 

Release 9) 

ETSI TS 123 008 V8.11.0 (2010-10) 



LTE; Organization of subscriber data (3GPP TS 23.008 

version 8.11.0 Release 8) 




LTE; Organization of subscriber data (3GPP TS 23.008 





Location management procedures (3GPP TS 23.012 





Basic call handling; Technical realization 





Basic call handling; Technical realization 





Technical realization of the Short Message Service 

(SMS) (3GPP TS 23.040 version 9.3.0 Release 9) 




Technical realization of Cell Broadcast Service (CBS) 





General Packet Radio Service (GPRS); Service 

description; Stage 2 (3GPP TS 23.060 version 7.10.0 

Release 7) 






Release 8) 






Release 9) 




Customized Applications for Mobile network Enhanced 

Logic (CAMEL) Phase X; Stage 2 (3GPP TS 23.078 





Customized Applications for Mobile network Enhanced 

Logic (CAMEL) Phase X; Stage 2 (3GPP TS 23.078 





Non-Access-Stratum (NAS) functions related to Mobile 

Station (MS) in idle mode (3GPP TS 23.122 





Non-Access-Stratum (NAS) functions related to Mobile 

Station (MS) in idle mode (3GPP TS 23.122 





Circuit switched data bearer services (3GPP TS 23.202 





LTE; Policy and charging control architecture 

(3GPP TS 23.203 version 8.11.0 Release 8) 




LTE; Policy and charging control architecture 




Bearer-independent circuit-switched core network; 




Bearer-independent circuit-switched core network; 





LTE; Single Radio Voice Call Continuity (SRVCC); 





LTE; IP Multimedia Subsystem (IMS); Stage 2 





LTE; IP Multimedia Subsystem (IMS) Service Continuity; 





LTE; Circuit Switched (CS) fallback in Evolved Packet 

System (EPS); Stage 2 (3GPP TS 23.272 version 8.9.0 

Release 8) 




LTE; Circuit Switched (CS) fallback in Evolved Packet 

System (EPS); Stage 2 (3GPP TS 23.272 version 9.5.0 

Release 9) 




LTE; IP Multimedia Sybsystem (IMS) centralized 

services; Stage 2 (3GPP TS 23.292 version 9.7.0 

Release 9) 

35




LTE; IP Multimedia Subsystem (IMS) Application Level 

Gateway (IMS-ALG) – IMS Access Gateway (IMS- 

AGW) interface: Procedures descriptions 




LTE; User Data Convergence (UDC); Technical 

realization and information flows; Stage 2 




LTE; IMS Restoration Procedures (3GPP TS 23.380 



General Packet Radio Service (GPRS) enhancements 

for Evolved Universal Terrestrial Radio Access Network 

(E-UTRAN) access (3GPP TS 23.401 version 8.11.0 

Release 8) 


General Packet Radio Service (GPRS) enhancements 

for Evolved Universal Terrestrial Radio Access Network 

(E-UTRAN) access (3GPP TS 23.401 version 9.6.0 

Release 9) 



LTE; Architecture enhancements for non-3GPP 

accesses (3GPP TS 23.402 version 9.6.0 Release 9) 




LTE; Mobile radio interface Layer 3 specification; Core 

network protocols; Stage 3 (3GPP TS 24.008 





LTE; Mobile radio interface Layer 3 specification; Core 

network protocols; Stage 3 (3GPP TS 24.008 




LTE; Communication Continuity Management 

Object (MO) (3GPP TS 24.216 version 7.5.0 Release 7) 











LTE; 3GPP system to Wireless Local Area Network 

(WLAN) interworking; WLAN User Equipment (WLAN 

UE) to network protocols; Stage 3 (3GPP TS 24.234 




LTE; 3GPP system to Wireless Local Area Network 

(WLAN) interworking; WLAN User Equipment (WLAN 

UE) to network protocols; Stage 3 (3GPP TS 24.234 




LTE; IP Multimedia (IM) Core Network (CN) subsystem 

IP Multimedia Subsystem (IMS) service continuity; 





IP Multimedia Subsystem (IMS) service continuity; 





LTE; Personal Network Management (PNM); Stage 3 




LTE; Allowed Closed Subscriber Group (CSG) list; 

Management Object (MO) (3GPP TS 24.285 




LTE; Allowed Closed Subscriber Group (CSG) list; 

Management Object (MO) (3GPP TS 24.285 





Centralized Services (ICS); Stage 3 (3GPP TS 24.292 





Centralized Services (ICS); Stage 3 (3GPP TS 24.292 





LTE; IP Multimedia Subsystem (IMS) Centralized 

Services (ICS) protocol via I1 interface 




LTE; Non-Access-Stratum (NAS) protocol for Evolved 

Packet System (EPS); Stage 3 (3GPP TS 24.301 




LTE; Non-Access-Stratum (NAS) protocol for Evolved 

Packet System (EPS); Stage 3 (3GPP TS 24.301 




LTE; Access to the 3GPP Evolved Packet Core (EPC) 

via non-3GPP access networks; Stage 3 




LTE; Access to the 3GPP Evolved Packet Core (EPC) 

via non-3GPP access networks; Stage 3 





LTE; Mobility management based on Dual-Stack Mobile 

IPv6; Stage 3 (3GPP TS 24.303 version 8.7.0 Release 8) 




LTE; Mobility management based on Dual-Stack Mobile 

IPv6; Stage 3 (3GPP TS 24.303 version 9.3.0 Release 9) 




LTE; TISPAN; PSTN/ISDN simulation services: 

Communication Diversion (CDIV); Protocol specification 


36





LTE; TISPAN; PSTN/ISDN simulation services; Malicious 

Communication Identification (MCID) 




LTE; Communication Diversion (CDIV) using IP 

Multimedia (IM) Core Network (CN) subsystem; Protocol 

specification (3GPP TS 24.604 version 8.8.0 Release 8) 




LTE; Communication Diversion (CDIV) using IP 

Multimedia (IM) Core Network (CN) subsystem; Protocol 





LTE; Communication HOLD (HOLD) using IP Multimedia 

(IM) Core Network (CN) subsystem; Protocol 





LTE; Communication HOLD (HOLD) using IP Multimedia 

(IM) Core Network (CN) subsystem; Protocol 





LTE; Malicious Communication Identification (MCID) 

using IP Multimedia (IM) Core Network (CN) subsystem; 

Protocol specification (3GPP TS 24.616 version 8.7.0 

Release 8) 




LTE; Malicious Communication Identification (MCID) 

using IP Multimedia (IM) Core Network (CN) subsystem; 

Protocol specification (3GPP TS 24.616 version 9.2.0 

Release 9) 




LTE; Completion of Communications to Busy Subscriber 

(CCBS) and Completion of Communications by No Reply 

(CCNR) using IP Multimedia (IM)Core Network (CN) 

subsystem; Protocol Specification (3GPP TS 24.642 





LTE; Completion of Communications to Busy Subscriber 

(CCBS) and Completion of Communications by No Reply 

(CCNR) using IP Multimedia (IM)Core Network (CN) 

subsystem; Protocol Specification (3GPP TS 24.642 





LTE; Advice Of Charge (AOC) using IP Multimedia (IM) 

Core Network (CN) subsystem (3GPP TS 24.647 





LTE; Advice Of Charge (AOC) using IP Multimedia (IM) 

Core Network (CN) subsystem (3GPP TS 24.647 




User Equipment (UE) radio transmission and reception 

(FDD) (3GPP TS 25.101 version 7.18.0 Release 7) 












(TDD) (3GPP TS 25.102 version 7.18.0 Release 7) 











Base Station (BS) radio transmission and reception 

(FDD) (3GPP TS 25.104 version 8.11.0 Release 8) 











UTRA repeater radio transmission and reception 










ETSI TS 125 113 V9.3.0 (2010-10) 


Base station (BS) and repeater electromagnetic 

compatibility (EMC) (3GPP TS 25.113 version 9.3.0 

Release 9) 



Requirements for support of radio resource 

management (TDD) (3GPP TS 25.123 version 8.8.0 

Release 8) 




management (TDD) (3GPP TS 25.123 version 9.3.0 

Release 9) 




management (FDD) (3GPP TS 25.133 version 9.5.0 

Release 9) 

37




Base Station (BS) conformance testing (FDD) 




Base Station (BS) conformance testing (FDD) 




Base Station (BS) conformance testing (TDD) 




UTRA repeater conformance testing (3GPP TS 25.143 










ETSI TS 125 211 V7.10.0 (2010-10) 


Physical channels and mapping of transport channels 

onto physical channels (FDD) (3GPP TS 25.211 














Multiplexing and channel coding (FDD) 




Spreading and modulation (FDD) (3GPP TS 25.213 




Physical layer procedures (FDD) (3GPP TS 25.214 













onto physical channels (TDD) (3GPP TS 25.221 





onto physical channels (TDD) (3GPP TS 25.221 




Physical layer procedures (TDD) (3GPP TS 25.224 




Physical layer procedures (TDD) (3GPP TS 25.224 




Services provided by the physical layer 












User Equipment (UE) procedures in idle mode and 

procedures for cell reselection in connected mode 




User Equipment (UE) procedures in idle mode and 

procedures for cell reselection in connected mode 




UE Radio Access capabilities (3GPP TS 25.306 




UE Radio Access capabilities (3GPP TS 25.306 




High Speed Downlink Packet Access (HSDPA); Overall 

description; Stage 2 (3GPP TS 25.308 version 7.11.0 

Release 7) 





Release 8) 





Release 9) 



Medium Access Control (MAC) protocol specification 












Packet Data Convergence Protocol (PDCP) 


38




UTRAN Iu interface Radio Access Network Application 

Part (RANAP) signalling (3GPP TS 25.413 version 9.4.0 

Release 9) 



UTRAN Iur interface general aspects and principles 




UTRAN Iub interface user plane protocols for Common 

Transport Channel data streams (3GPP TS 25.435 




UTRAN Iub interface user plane protocols for Common 

Transport Channel data streams (3GPP TS 25.435 




UTRAN Iupc interface Positioning Calculation 

Application Part (PCAP) signalling (3GPP TS 25.453 




UTRAN Iuh Interface RANAP User Adaption (RUA) 

signalling (3GPP TS 25.468 version 9.3.0 Release 9) 



UTRAN Iuh interface Home Node B (HNB) Application 

Part (HNBAP) signalling (3GPP TS 25.469 version 9.3.0 

Release 9) 



LTE; IP Multimedia Subsystem (IMS) based Packet 

Switch Streaming (PSS) and Multimedia Broadcast/ 

Multicast Service (MBMS) User Service; Protocols 




LTE; IP Multimedia Subsystem (IMS) based Packet 

Switch Streaming (PSS) and Multimedia Broadcast/ 

Multicast Service (MBMS) User Service; Protocols 





LTE; Transparent end-to-end packet switched 

streaming service (PSS); 3GPP file format (3GP) 





eCall data transfer; In-band modem solution; ANSI-C 

reference code (3GPP TS 26.268 version 8.4.0 Release 8) 




eCall data transfer; In-band modem solution; ANSI-C 

reference code (3GPP TS 26.268 version 9.2.0 

Release 9) 




eCall data transfer; In-band modem solution; Conformance 

testing (3GPP TS 26.269 version 8.2.0 Release 8) 




eCall data transfer; In-band modem solution; Conformance 




LTE; Multimedia Broadcast/Multicast Service (MBMS); 

Protocols and codecs (3GPP TS 26.346 version 9.4.0 

Release 9) 




LTE; AT command set for User Equipment (UE) 





LTE; AT command set for User Equipment (UE) 





Mobile Application Part (MAP) specification 





General requirements on interworking between the 

Public Land Mobile Network (PLMN) and the Integrated 

Services Digital Network (ISDN) or Public Switched 

Telephone Network (PSTN) (3GPP TS 29.007 





General Packet Radio Service (GPRS); GPRS Tunnelling 

Protocol (GTP) across the Gn and Gp interface 





General Packet Radio Service (GPRS); GPRS Tunnelling 

Protocol (GTP) across the Gn and Gp interface 





LTE; Interworking between the Public Land Mobile 

Network (PLMN) supporting packet based services 

and Packet Data Networks (PDN) (3GPP TS 29.061 




LTE; Mobility Management Entity (MME) – Visitor 

Location Register (VLR) SGs interface specification 

(3GPP TS 29.118 version 8.7.0 Release 8) 



LTE; Mobility Management Entity (MME) – Visitor 

Location Register (VLR) SGs interface specification 

(3GPP TS 29.118 version 9.3.0 Release 9) 




LTE; Interworking between the IM CN subsystem and 

IP networks (3GPP TS 29.162 version 7.4.0 Release 7) 











39





LTE; Interworking between the IP Multimedia (IM) Core 

Network (CN) subsystem and Circuit Switched (CS) 

networks (3GPP TS 29.163 version 7.20.0 Release 7) 
















Interworking between the 3GPP CS domain with BICC 

or ISUP as signalling protocol and external SIP-I 





LTE; Inter-IMS Network to Network Interface (NNI) 





LTE; Inter-IMS Network to Network Interface (NNI) 




LTE; Cell Broadcast Centre interfaces with the Evolved 

Packet Core; Stage 3 (3GPP TS 29.168 version 8.4.0 

Release 8) 



LTE; Cell Broadcast Centre interfaces with the Evolved 

Packet Core; Stage 3 (3GPP TS 29.168 version 9.2.0 

Release 9) 




LTE; Location Services (LCS); LCS Application Protocol 

(LCS-AP) between the Mobile Management Entity 

(MME) and Evolved Serving Mobile Location Centre 

(E-SMLC); SLs interface (3GPP TS 29.171 version 9.2.0 

Release 9) 




LTE; Location Services (LCS); Evolved Packet Core 

(EPC) LCS Protocol (ELP) between the Gateway Mobile 

Location Centre (GMLC) and the Mobile Management 

Entity (MME); SLg interface (3GPP TS 29.172 





LTE; Location Services (LCS); Diameter-based SLh 

interface for Control Plane LCS (3GPP TS 29.173 




LTE; Policy and charging control over Gx reference 

point (3GPP TS 29.212 version 8.9.0 Release 8) 



LTE; Policy and charging control over Gx reference 





LTE; Policy and charging control signalling flows and 

Quality of Service (QoS) parameter mapping 
















LTE; Policy and charging control over Rx reference 




LTE; Policy and charging control over Rx reference 





LTE; Policy and Charging Control (PCC) over S9 

reference point; Stage 3 (3GPP TS 29.215 version 8.7.0 

Release 8) 




LTE; Policy and Charging Control (PCC) over S9 

reference point; Stage 3 (3GPP TS 29.215 version 9.4.0 

Release 9) 




LTE; IP Multimedia (IM) Subsystem Cx and Dx 

Interfaces; Signalling flows and message contents 

















LTE; Cx and Dx interfaces based on the Diameter 

protocol; Protocol details (3GPP TS 29.229 








40











LTE; Diameter applications; 3GPP specific codes and 

identifiers (3GPP TS 29.230 version 9.4.0 Release 9) 




LTE; Interworking between SIP-I based circuit-switched 

core network and other networks (3GPP TS 29.235 




LTE; Interconnection Border Control Functions (IBCF) - 

Transition Gateway (TrGW) interface; Ix interface; 




LTE; Evolved Packet System (EPS); Mobility 

Management Entity (MME) and Serving GPRS Support 

Node (SGSN) related interfaces based on Diameter 

protocol (3GPP TS 29.272 version 8.8.0 Release 8) 



LTE; Evolved Packet System (EPS); Mobility 

Management Entity (MME) and Serving GPRS Support 

Node (SGSN) related interfaces based on Diameter 

protocol (3GPP TS 29.272 version 9.4.0 Release 9) 



LTE; Evolved Packet System (EPS); 3GPP EPS AAA 

interfaces (3GPP TS 29.273 version 8.6.0 Release 8) 



LTE; Evolved Packet System (EPS); 3GPP EPS AAA 

interfaces (3GPP TS 29.273 version 9.4.0 Release 9) 



LTE; 3GPP Evolved Packet System (EPS); Evolved 

General Packet Radio Service (GPRS) Tunnelling 

Protocol for Control plane (GTPv2-C); Stage 3 




LTE; 3GPP Evolved Packet System (EPS); Evolved 

General Packet Radio Service (GPRS) Tunnelling 

Protocol for Control plane (GTPv2-C); Stage 3 




LTE; Proxy Mobile IPv6 (PMIPv6) based Mobility and 

Tunnelling protocols; Stage 3 (3GPP TS 29.275 




LTE; 3GPP Evolved Packet System (EPS); Optimized 

handover procedures and protocols between E-UTRAN 

access and cdma2000 HRPD Access; Stage 3 




LTE; Evolved Packet System (EPS); 3GPP Sv interface 

(MME to MSC, and SGSN to MSC) for SRVCC 




LTE; Domain Name System Procedures; Stage 3 





LTE; IP Multimedia (IM) Subsystem Sh interface; 

Signalling flows and message contents 

















LTE; Sh interface based on the Diameter protocol; Protocol 

details (3GPP TS 29.329 version 8.7.0 Release 8) 




LTE; Sh interface based on the Diameter protocol; 

Protocol details (3GPP TS 29.329 version 9.3.0 

Release 9) 



Media Gateway Control Function (MGCF) - IM Media 

Gateway; Mn interface (3GPP TS 29.332 version 8.9.0 

Release 8) 



Media Gateway Control Function (MGCF) - IM Media 

Gateway; Mn interface (3GPP TS 29.332 version 9.2.0 

Release 9) 




LTE; IMS Application Level Gateway (IMS-ALG) – IMS 

Access Gateway (IMS-AGW); Iq Interface; Stage 3 





LTE; User Data Convergence (UDC); User data 

repository access protocol over the Ud interface; 




Core network Nb interface user plane protocols 





LTE; TISPAN; NGN Release 1; Endorsement of 

3GPP TS 29.162 Interworking between IM CN Subsystem 

and IP networks (3GPP TS 29.421 version 7.1.0 

Release 7) 



Universal Mobile Telecommunications System (UMTS); LTE; 

TISPAN; NGN Release 1; Endorsement of 3GPP TS 29.162 

Interworking between IM CN Sub-system and IP networks 


41




LTE; Characteristics of the Universal Subscriber Identity 

Module (USIM) application (3GPP TS 31.102 




LTE; Characteristics of the Universal Subscriber Identity 

Module (USIM) application (3GPP TS 31.102 





LTE; Characteristics of the IP Multimedia Services 

Identity Module (ISIM) application (3GPP TS 31.103 





LTE; Characteristics of the IP Multimedia Services 

Identity Module (ISIM) application (3GPP TS 31.103 





LTE; Universal Subscriber Identity Module (USIM) 

Application Toolkit (USAT) (3GPP TS 31.111 






Application Toolkit (USAT) (3GPP TS 31.111 




LTE; UICC-terminal interface; Universal Subscriber 

Identity Module (USIM) application test specification 





conformance test specification (3GPP TS 31.122 




LTE; Mobile Equipment (ME) conformance test 

specification; Universal Subscriber Identity Module 

Application Toolkit (USAT) conformance test 




LTE; Contact Manager Application Programming 

Interface (API); Contact Manager API for Java Card 





LTE; Telecommunication management; Integration 

Reference Point (IRP) Concept and definitions 





LTE; Telecommunication management; Integration 

Reference Point (IRP) Information Service (IS) template 





LTE; Telecommunication management; Charging 

management; Packet Switched (PS) domain charging 


















management; IP Multimedia Subsystem (IMS) charging 



Digital cellular telecommunications system 

(Phase 2+); Universal Mobile Telecommunications 

System (UMTS); LTE; Telecommunication 

management; Charging management; Multimedia 

Messaging Service (MMS) charging (3GPP TS 32.270 





management; MultiMedia Telephony (MMTel) charging 





management; Advice of Charge (AoC) service 





management; Advice of Charge (AoC) service 






management; Charging Data Record (CDR) parameter 

description (3GPP TS 32.298 version 8.9.0 Release 8) 





management; Charging Data Record (CDR) parameter 

description (3GPP TS 32.298 version 9.5.0 Release 9) 





management; Diameter charging applications 














42





LTE; Telecommunication management; Performance 

Management (PM); Concept and requirements 





LTE; Telecommunication management; Subscriber and 

equipment trace; Trace control and configuration 

management (3GPP TS 32.422 version 9.2.1 Release 9) 





equipment trace; Trace data definition and 






equipment trace; Trace data definition and 



Telecommunication management; Performance 

Management (PM); Performance measurements 

Evolved Universal Terrestrial Radio Access Network 

(E-UTRAN) (3GPP TS 32.425 version 9.4.0 Release 9) 




Evolved Packet Core (EPC) network (3GPP TS 32.426 





Evolved Packet Core (EPC) network (3GPP TS 32.426 





LTE; Telecommunication management; Self-Organizing 

Networks (SON) Policy Network Resource Model 

(NRM) Integration Reference Point (IRP): Information 

Service (IS) (3GPP TS 32.522 version 9.1.0 Release 9) 





Networks (SON); Self-optimization 





Networks (SON) Policy Network Resource Model 

(NRM) Integration Reference Point (IRP); eXtensible 

Markup Language (XML) file format definition 




LTE; Telecommunication management; Software 

management (SwM); Integration Reference Point (IRP); 

Common Object Request Broker Architecture (CORBA) 

Solution Set (SS) (3GPP TS 32.533 version 9.4.0 

Release 9) 



Telecommunication management; Home Node B (HNB) 

Operations, Administration, Maintenance and 

Provisioning (OAM&P); XML definitions for Type 1 

interface HNB to HNB Management System (HMS) 



Telecommunication management; Home enhanced 

Node B (HeNB) Operations, Administration, 

Maintenance and Provisioning (OAM&P); XML 

definitions for Type 1 interface HeNB to HeNB 

Management System (HeMS) (3GPP TS 32.594 





LTE; Telecommunication management; Configuration 

Management (CM); Basic CM Integration Reference 

Point (IRP) 






Point (IRP) 






Point (IRP) 





Management (CM); Core network resources Integration 

Reference Point (IRP) 




Management (CM); UTRAN network resources 

Integration Reference Point (IRP); Network Resource 

Model (NRM) (3GPP TS 32.642 version 8.3.0 Release 8) 




Management (CM); UTRAN network resources 





Telecommunication management; Configuration 

Management (CM); GERAN network resources 







Integration Reference Point (IRP); Common Object 

Request Broker Architecture (CORBA) Solution Set (SS) 






Integration Reference Point (IRP); Bulk CM eXtensible 

Markup Language (XML) file format definition 





LTE; Telecommunication management; Evolved Packet 

Core (EPC) Network Resource Model (NRM) Integration 

Reference Point (IRP): Common Object Request 

Broker Architecture (CORBA) Solution Set (SS) 


43





LTE; Telecommunication management; Evolved Packet 

Core (EPC) Network Resource Model (NRM) Integration 

Reference Point (IRP): eXtensible Markup Language 

(XML) definitions (3GPP TS 32.755 version 9.3.0 

Release 9) 




LTE; Telecommunication management; Evolved 

Universal Terrestrial Radio Access Network (E-UTRAN) 

Network Resource Model (NRM) Integration Reference 

Point (IRP): Information Service (IS) (3GPP TS 32.762 








Point (IRP): Information Service (IS) (3GPP TS 32.762 








Point (IRP): Common Object Request Broker 

Architecture (CORBA) Solution Set (SS) 








Point (IRP): Common Object Request Broker 

Architecture (CORBA) Solution Set (SS) 








Point (IRP): eXtensible Markup Language (XML) 

definitions (3GPP TS 32.765 version 8.4.0 Release 8) 







Point (IRP): eXtensible Markup Language (XML) 

definitions (3GPP TS 32.765 version 9.4.0 Release 9) 



LTE; 3G security; Security architecture (3GPP TS 33.102 




LTE; 3G security; Lawful interception architecture and 

functions (3GPP TS 33.107 version 9.2.0 Release 9) 



LTE; 3G security; Handover interface for Lawful 

Interception (LI) (3GPP TS 33.108 version 9.4.0 

Release 9) 



LTE; Presence service; Security (3GPP TS 33.141 





LTE; 3G security; Access security for IP-based services 




LTE; Network Domain Security (NDS); Authentication 

Framework (AF) (3GPP TS 33.310 version 9.4.0 

Release 9) 



LTE; Security of Home Node B (HNB) / Home evolved 

Node B (HeNB) (3GPP TS 33.320 version 9.3.0 

Release 9) 




LTE; 3GPP System Architecture Evolution (SAE); 

Security architecture (3GPP TS 33.401 version 9.5.0 

Release 9) 




LTE; 3GPP System Architecture Evolution (SAE); 

Security aspects of non-3GPP accesses 




LTE; Terminal logical test interface; Special conformance 

testing functions (3GPP TS 34.109 version 9.1.0 

Release 9) 



User Equipment (UE) conformance specification; Radio 

transmission and reception (FDD); Part 2: 

Implementation Conformance Statement (ICS) 

(3GPP TS 34.121-2 version 9.2.0 Release 9) 



LTE; Internet Protocol (IP) multimedia call control 

protocol based on Session Initiation Protocol (SIP) and 

Session Description Protocol (SDP); User Equipment 

(UE) conformance specification; Part 1: Protocol 

conformance specification (3GPP TS 34.229-1 




LTE; Internet Protocol (IP) multimedia call control 

protocol based on Session Initiation Protocol (SIP) and 

Session Description Protocol (SDP); User Equipment 

(UE) conformance specification; Part 2: Implementation 

Conformance Statement (ICS) specification 














44




FDD repeater radio transmission and reception 




Base Station (BS) and repeater ElectroMagnetic 

Compatibility (EMC) (3GPP TS 36.113 version 9.2.0 

Release 9) 


LTE; Evolved Universal Terrestrial Radio Access 

(E-UTRA); Requirements for support of radio resource 

management (3GPP TS 36.133 version 8.11.0 

Release 8) 


LTE; Evolved Universal Terrestrial Radio Access 

(E-UTRA); Requirements for support of radio resource 




Base Station (BS) conformance testing 




Base Station (BS) conformance testing 




FDD repeater conformance testing (3GPP TS 36.143 




Multiplexing and channel coding (3GPP TS 36.212 




Physical layer procedures (3GPP TS 36.213 



Evolved Universal Terrestrial Radio Access (E-UTRA) 

and Evolved Universal Terrestrial Radio Access Network 

(E-UTRAN); Overall description; Stage 2 




User Equipment (UE) procedures in idle mode 




User Equipment (UE) procedures in idle mode 




(E-UTRAN); Stage 2 functional specification of User 

Equipment (UE) positioning in E-UTRAN 




User Equipment (UE) radio access capabilities 




Requirements on User Equipments (UEs) supporting a 

release-independent frequency band (3GPP TS 36.307 




Requirements on User Equipments (UEs) supporting a 

release-independent frequency band (3GPP TS 36.307 




Radio Link Control (RLC) protocol specification 




Radio Resource Control (RRC); Protocol specification 




Radio Resource Control (RRC); Protocol specification 




LTE Positioning Protocol (LPP) (3GPP TS 36.355 




(E-UTRAN); S1 Application Protocol (S1AP) 




(E-UTRAN); X2 Application Protocol (X2AP) 




(E-UTRAN); M2 Application Protocol (M2AP) 




(E-UTRAN); M3 Application Protocol (M3AP) 




LTE Positioning Protocol A (LPPa) (3GPP TS 36.455 




and Evolved Packet Core (EPC); Common test 

environments for User Equipment (UE) conformance 




and Evolved Packet Core (EPC); Special conformance 

testing functions for User Equipment (UE) 




User Equipment (UE) conformance specification; Radio 

transmission and reception; Part 2: Implementation 

Conformance Statement (ICS) (3GPP TS 36.521-2 




and Evolved Packet Core (EPC); User Equipment (UE) 

conformance specification; Part 2: Implementation 

Conformance Statement (ICS) proforma specification 





LTE; E-UTRA, UTRA and GSM/EDGE; Multi-Standard 

Radio (MSR) Base Station (BS) radio transmission and 

reception (3GPP TS 37.104 version 9.3.0 Release 9) 





Radio (MSR) Base Station (BS) Electromagnetic 

Compatibility (EMC) (3GPP TS 37.113 version 9.1.0 

Release 9) 

45






Radio (MSR) Base Station (BS) conformance testing 




Functions related to Mobile Station (MS) in idle mode 

and group receive mode (3GPP TS 43.022 




Functions related to Mobile Station (MS) in idle mode 

and group receive mode (3GPP TS 43.022 




Voice Group Call Service (VGCS); Stage 2 




Mobile radio interface layer 3 specification; Radio 

Resource Control (RRC) protocol (3GPP TS 44.018 




Mobile radio interface layer 3 specification; Radio 

Resource Control (RRC) protocol (3GPP TS 44.018 




General Packet Radio Service (GPRS); Mobile Station 

(MS) - Base Station System (BSS) interface; Radio Link 

Control / Medium Access Control (RLC/MAC) protocol 




General Packet Radio Service (GPRS); Mobile Station 

(MS) - Base Station System (BSS) interface; Radio Link 

Control / Medium Access Control (RLC/MAC) protocol 




Physical layer on the radio path; General description 




Multiplexing and multiple access on the radio path 




Radio transmission and reception (3GPP TS 45.005 




Radio transmission and reception (3GPP TS 45.005 




Radio subsystem link control (3GPP TS 45.008 












Mobile Switching Centre - Base Station system 

(MSC-BSS) interface; Layer 3 specification 




General Packet Radio Service (GPRS); Base Station 

System (BSS) - Serving GPRS Support Node (SGSN); 

BSS GPRS protocol (BSSGP) (3GPP TS 48.018 




General Packet Radio Service (GPRS); Base Station 

System (BSS) - Serving GPRS Support Node (SGSN); 

BSS GPRS protocol (BSSGP) (3GPP TS 48.018 




Base Station Controller - Cell Broadcast Centre 

(BSC-CBC) interface specification; Cell Broadcast 

Service Protocol (CBSP) (3GPP TS 48.049 




Mobile Station (MS) conformance specification; Part 2: 

Protocol Implementation Conformance Statement 

(PICS) proforma specification (3GPP TS 51.010-2 





Subscriber Identity Module (SIM) application toolkit 

conformance test specification (3GPP TS 51.010-4 





Inter-Radio-Access-Technology (RAT) (GERAN / 

UTRAN) interaction Abstract Test Suite (ATS) 





Location Services (LCS) test scenarios and assistance 

data (3GPP TS 51.010-7 version 9.0.0 Release 9) 



Base Station System (BSS) equipment specification; 

Radio aspects (3GPP TS 51.021 version 8.8.0 

Release 8) 



Base Station System (BSS) equipment specification; 

Radio aspects (3GPP TS 51.021 version 9.3.0 

Release 9) 

Parengë Lyda Maþeikienë 

46


Lietuvos standartizacijos departamentas 

Direktorius .............................................................................................................................................................. 270 9360 

Direktoriaus pavaduotojas .................................................................................................................................. 270 9345 

Faksas 212 6252 

TEISËS, PERSONALO IR KOMUNIKACIJOS SKYRIUS 

Vyriausioji specialistë teisëkûrai ............................................................................................................................... 279 1143 

Vyriausiasis specialistas tarptautiniams ryðiams .................................................................................................... 270 9358 

Vyriausioji specialistë mokymams ir archyvui ........................................................................................................ 270 9360 

Padëjëja ryðiams su visuomene .............................................................................................................................. 279 1135 

203 kab. 

206 kab. 

207 kab. 

204 kab. 

205 kab. 

401 kab. 

STANDARTIZACIJOS SKYRIUS 

Vedëja. Bendrieji klausimai ..................................................................................................................................... 270 9361 

1-asis poskyris 

Þaislai, kokybës vadyba, techniniai brëþiniai, paslaugos, socialinë atsakomybë ................................................. 270 9365 

Tekstilë, dujos sistemos, nafta ir naftos produktai, popierius, informacija ir dokumentavimas ......................... 279 1134 

Cheminë analizë, kietasis biokuras, plastikai, pieno, grûdø, þuvies produktai, pašarai ...................................... 279 1134 

Tràðos, klijai, aplinkos apsauga, kosmetika, maisto analizë, dangos ................................................................... 270 9365 


Poskyrio vedëja. Bendrieji klausimai. Darbø sauga, ergonomika, konvejeriai, nanotechnologijos .................. 234 8399 

Sveikata, pakavimas, akiø optika ............................................................................................................................. 234 8396 

Mechanika, metalai, suvirinimas .............................................................................................................................. 234 8396 

Metrologija, bankininkystë, naftos produktø árenginiai, korteliø leidëjø atpaþinimo kodo skyrimas, 

neardomieji bandymai ............................................................................................................................................. 234 8397 

Liftai, sprogiosios atmosferos, gabenamieji dujø balionai .................................................................................... 234 8397 

3-iasis poskyris 

Informacijos ir ryšiø technologija, telekomunikacijos, informacijos saugumas, apsauga ................................. 270 9349 

Elektronika, elektros energetika ............................................................................................................................... 279 1151 

Elektrotechnika, elektromagnetinis suderinamumas ............................................................................................. 279 1151 


Poskyrio vedëjas. Bendrieji klausimai, statybinës konstrukcijos, priešgaisrinë sauga ...................................... 279 1150 

Statyba, statybinës medþiagos ir gaminiai, automobiliø keliø tiesyba ir medþiagos ........................................... 270 9341 

Baldai, mediena, techninë pagalba neágaliesiems, ugniai atsparios medþiagos .................................................. 279 1141 

PLANAVIMO, TIKRINIMO IR LEIDYBOS SKYRIUS 

Vedëja. Bendrieji klausimai. Standartizacijos darbø planavimas .......................................................................... 270 9366 

Terminø standartizavimas ........................................................................................................................................ 279 1138 

Lietuviø kalbos ekspertizë ........................................................................................................................................ 270 9371 

279 1153 

INFORMACIJOS SKYRIUS 

Vedëja. Bendrieji klausimai ..................................................................................................................................... 270 9362 

Notifikavimo ir informacijos poskyris 

Poskyrio vedëja. Keitimosi informacija pagal Direktyvos 98/34/EB nuostatas klausimai ................................... 270 9347 

Informacijos teikimas pagal Pasaulinës prekybos organizacijos nuostatas ......................................................... 270 9347 

Informacijos technologijø klausimai ....................................................................................................................... 270 9364 

Lietuvos standartø duomenø bazë ......................................................................................................................... 270 9364 

Terminø duomenø bazë .......................................................................................................................................... 279 1137 

Biblioteka ................................................................................................................................................................ 279 1142 

Platinimo poskyris 

Poskyrio vedëja. Uþsienio standartø ir kitø dokumentø platinimas ................................................................... 270 9348 

Departamento leidiniø platinimas ............................................................................................................................ 270 9343 

Dokumentø kopijavimas .......................................................................................................................................... 279 1139 

FINANSØ IR ADMINISTRAVIMO SKYRIUS 

Vedëja ..................................................................................................................................................................... 270 9346 

312 kab. 

311 kab. 

318 kab. 

318 kab. 

311 kab. 

302 kab. 

303 kab. 

303 kab. 

304 kab. 

304 kab. 

216 kab. 

216 kab. 

216 kab. 

319 kab. 

317 kab. 

313 kab. 

212 kab. 

202 kab. 

209 kab. 

217 kab. 

213 kab. 

214 kab. 

214 kab. 

213 kab. 

213 kab. 

404 kab. 

315 kab. 

307 kab. 

306 kab. 

305 kab. 

201 kab. 

Departamentas priima interesantus ir konsultuoja darbo dienomis nuo 10 iki 12 valandos ir nuo 13 iki 15 valandos (T. Kosciuðkos g. 30, 

LT-01100 Vilnius, el. paðtas lstboard@lsd.lt, interneto tinklalapis http://www.lsd.lt) 

VIEÐOJI ÁSTAIGA LST Sert (VðÁ LST Sert) 

(Konstitucijos pr. 15/5-15, LT-08106 Vilnius) 

Direktorius .............................................................................................................................................................. 270 9344 

Projektø direktorius .................................................................................................................................................. 270 9356 

Rinkodaros direktorius ............................................................................................................................................. 270 9356 

Faksas 270 9356 

47



Departamentas formuoja ir dalyvauja ágyvendinant kartu 

su suinteresuotomis Lietuvos Respublikos 

Vyriausybës institucijomis, ámonëmis, ástaigomis ir 

organizacijomis Lietuvos Respublikos Vyriausybës politikà 

standartizacijos srityje. 

Departamentas koordinuoja visø veiklos srièiø standartizacijos 

darbus ir metodiðkai jiems vadovauja. 

Departamentas sudaro technikos komitetus (TK) Lietuvos 

≤ ≥ 

standartø projektams rengti. 

Departamentas atlieka Pasaulinës prekybos organizacijos 

Sutarties dël techniniø prekybos kliûèiø nacionalinës uþklausø 

tarnybos funkcijas. 

Departamentas dalyvauja Lietuvos, Latvijos ir Estijos 

nacionaliniø standartizacijos institucijø Baltijos 

standartizacijos forume nuo 1999 m. 

Departamentas atstovauja Lietuvai tarptautinëse ir Europos 

organizacijose: 

Tarptautinëje standartizacijos organizacijoje (ISO) – narys 

nuo 2008 m.; 

Tarptautinëje elektrotechnikos komisijoje (IEC) – 

asocijuotasis narys nuo 1996 m.; 

Europos standartizacijos komitete (CEN) – narys nuo 

2003 m.; 

Europos elektrotechnikos standartizacijos komitete 

(CENELEC) – narys nuo 2003 m.; 

Europos telekomunikacijø standartø institute (ETSI) – narys 

nuo 1996 m. 

48

2010 Nr. 11 - Standartizacijos departamentas prie AM

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?