2 K SETS - Energija plus

SETS 2-3 KV 3 - 6 - 10
WITH 2-3 VERTICAL MULTISTAGE
CENTRIFUGAL PUMPS
2 PUMPS
3 PUMPS
2 KV
3 KV
Applications
Water lifting sets suitable for domestic, small installations for civil, agricultural or industrial use.
The use of vertically-mounted multistage centrifugal electric pumps ensures outstanding performance and elevated
efficiency.
They are particularly compact and strong, totally reliable and extremely silent-running.
SETS WITH 2-3 PUMPS
Constructional characteristics
HYDRAULIC PART
- 2-3 KV3 – 6 – 10 vertical multistage electric pumps
- Tropicalised galvanised sheet base complete with 4 anti-vibration rubber feet
- Suction and delivery manifold in tropicalised galvanised steel (threaded for 2 KV 3-6-10 and 3 KV 3-6 sets, flanged for
3 KV 10 sets)
- Caps or blank flanges for closing manifolds
- Ball valves with union on the suction and delivery side of each single pump
- Check valve on the suction side of each pump
- 2-3 membrane tanks
- Radial pressure gauge with shut-off valve
- Galvanised steel column support for electrical panel
ELECTRICAL PART
Control panel in schockproof fire-resistant plastic material, IP 55 protection level.
The panel comprises a general switch, pump overload circuit breakers, starting order exchange system for pumps, low
voltage circuit for control pressure switches, selectors (start buttons for single-phase panel), front of panel indicator
LED's.
It is installed on a column fitted to the pump support.
Pre-calibrated pump start/stop pressure switches.
The panel can be connected to:
• Float or pressure switch KIT as protection against operation without water (*)
• Maximum pressure switch KIT (*)
(*) Optional items available on request
The units are supplied packed in a strong cardboard box with a wooden pallet and
installation/maintenance instructions complete with wiring diagram.
37
®