Distributed / AS-Interface/ Logic Controller ... - Schneider Electric

Available
Monitor
functions
5 The screen on the right will
appear for the base controller.
A variety of functions can be
implemented, these include:
Emergency-off
Safety guard
Module
Feedback loop
Monitored start
To use the individual blocks,
drag the elements from the
yellow area on the left-hand
side to the white area on the
right-hand side (1. OSSD).
Adding an
Emergencyoff
6 The following dialog box will
appear if you place a forced
Emergency-off in the area.
In the Name field, enter a
unique name, which will help
you to find the device reliably
and without confusion (all
device names should be
selected on this basis).
Next, assign an Address to
the device; only the addresses
you entered as safe slaves
when configuring the motor
and have not yet used will
appear.
We use Local
acknowledgement. In our
example we use the AS-
Interface Slave address 7
which depends to one of the
XALD Pushbuttons. The Bit
address is IN-2.
Note: If you activate the Start-up
test, when the power supply is
restored, the device specified
must be forced (triggered) in order
to be able to acknowledge the
monitor.
Confirm with OK.
Optimized AS-Interface M238 Schneider Electric 99