Fielmann Weather station

Wetterstation GB 02.09.2002 7:34 Uhr Seite 10
10
SETTINGS
2. Press MIN/- or MAX/+ once to display the minimum or the maxi
mum temperature measured in a particular channel. The corresponding
Min or Max values appear in the display. Pressing the
same key again leads back to the display of the current temperature.
To delete the content of the memory, keep either the HOUR or
MINUTE key pressed for three seconds. The stored minimum
and maximum values will be deleted.
Signals for
interrupted
connection
Interference in
transmission
www.MBOservice.net
If the display for a particular channel fails to appear without any
apparent reason, then press the CHN key for three seconds to
enforce an immediate search. If that fails then check whether:
1. the transmitter of the corresponding channel is still at the
same location.
2. the batteries of the Weather Station or the transmitter are
spent. Replace the batteries if necessary.
Note: The batteries of the transmitter will freeze if the temperature
falls below the freezing point and their voltage will drop,
hence the effective range of the transmitter decreases.
3. if the maximum range of transmission is exceeded, and if
objects between the Sensor and the Weather Station interfere
with the transmission. Reduce the interference if possible
by reducing the distance between the transmitter and
the Weather Station.
Signals from other household devices like doorbells, alarms, and
entrance monitoring systems can interfere with the transmission
and can temporarily disrupt the reception. That is normal and
does not effect the general functioning of this device. The transmission
and the reception of the measured values resume with
the disappearance of the disturbances.