Fielmann Weather station
Fielmann Weather station
Fielmann Weather station
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Wetter<strong>station</strong> GB 02.09.2002 7:34 Uhr Seite 9<br />
SETTINGS<br />
9<br />
Querying<br />
outside and<br />
inside temperatures<br />
The inside temperature is shown in the second line of the display.<br />
To switch from the outside temperature of one channel to<br />
another, press the CHN key. In the first line of the display, one<br />
channel after another will be shown. If no signal is received from<br />
a particular transmitter for more than 64 minutes, the outside<br />
temperature display of the corresponding channel starts flashing<br />
till a successful measurement is received again.<br />
Check whether the transmitter is in a faultless condition or not.<br />
You can wait for a while, or you can start the search immediately<br />
by keeping the CHN key pressed for 3 seconds. Of course no<br />
temperature will be shown if no transmitter is programmed for<br />
that channel. The temperature trend shown in the display shows<br />
the tendency of the measurements made from a particular location.<br />
Three different temperature trends can be displayed: rising,<br />
constant and falling.<br />
Arrow Sign<br />
Tendency rising constant falling<br />
If the temperature rises or falls above or below the range of<br />
measurement of the <strong>Weather</strong> Station or the radio sensor (see<br />
the technical data), then the display shows HI or LO.<br />
Maximum<br />
and minimum<br />
temperatures<br />
www.MBOservice.net<br />
The maximum and the minimum values of the measured inside<br />
temperatures, as well as the individual outside temperatures of<br />
different channels are automatically saved in the memory.<br />
To display these values:<br />
1. Press CHN to select the channel to be checked.
Change language