Fielmann Weather station
Fielmann Weather station
Fielmann Weather station
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Wetter<strong>station</strong> GB 02.09.2002 7:34 Uhr Seite 8<br />
8<br />
SETTINGS<br />
Using the<br />
wall holder<br />
The transmitter is<br />
provided with a<br />
Wall Holder which<br />
can be used if you<br />
want to attach the<br />
device to a wall.<br />
Automatic Setting<br />
When the batteries are placed in the transmitter, the latter<br />
starts transmitting the measured temperature at 1 minute<br />
intervals. After the batteries are placed, the <strong>Weather</strong> Station<br />
begins to search for signals after a period of 3 minutes. On<br />
successful reception of a signal, the temperature of the corresponding<br />
channel is shown in the first line of the display. The<br />
inside temperature is shown in the second line. In the <strong>Weather</strong><br />
Station the measured values are updated automatically at 1<br />
minute intervals.<br />
If no signal is received from a particular channel for more than<br />
one hour, the outside temperature display starts flashing. In that<br />
case, press the CHN key for about 3 seconds to restart the three<br />
minute search. This is useful for synchronisation of the transmission<br />
and the reception between the <strong>Weather</strong> Station and the<br />
transmitter. Repeat these steps whenever deviations occur between<br />
the display on the <strong>Weather</strong> Station and the display directly<br />
near the radio transmitter.<br />
www.MBOservice.net
Change language