Multidiscipline support systeM type MultiGrid™ - JT Day Pty Ltd

U-SUPPORT: CH 50-2 -1,5mm
MG-U: 01
A)
S-M WB-200-CH50-2
Thickness
1.5 mm
Height
B)
C)
P y (KN)
D)
Width
P x (KN)
Items list:
Function Type Thickness (mm) Weight (kg) Art # HDG Art # SS # of Parts
A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2
B) Mekano Channel S-M CH50-2 (*kg/m) 1,5 1,7* 1302506 1371689 1
C) Angle Bracket S-M AB 55x55-10 4 0,2 1302494 1371712 2
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 14
**) S-M WB-200-CH50-2 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH 50-2 (vertical) & CH 50-2 (horizontal)
Height(mm) Width(mm) Capacity P y (KN) Capacity P x (KN)
1000 250 5.5 1.8
1000 500 3.2 1.1
1000 750 2.3 0.8
1000 1000 1.8 0.6
1000 1250 1.5 0.5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• Max loads Y(KN) and X(KN) are non-concurrent loads.
• We do not recommend to use channel CH50-2-1,5 as horizontal support for widths > 1,2 m.
For these applications please substitute to either CH100-1 double or CH100-2T-2mm.
19