Multidiscipline support systeM type MultiGrid™ - JT Day Pty Ltd

Cantilever SUPPORT: CH100-4-5mm
MG-C: 09
S-M WB-CH100-4
A)
P y (KN)
B)
C)
Width
Thickness
3 mm
P x (KN)
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-CH100-4 6 3 1372606** 1372601 1
B) Mekano Channel S-M CH100-4-5(*kg/m) 3 8,5* 1372530 1372531 1
C) Self Lock Boltset S-M LS-NU-M10x130 10 0,05 N/A 1372950 4
D) End Protection A-CH100-4 EP Plastic: PS60018 1
**) S-M WB-CH100-4 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH100-4-5
Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
200 38,0 25,0 8,3 75,0 50,0
400 19,2 14,0 4,3 50,0 50,0
600 13,0 9,6 3,2 30,0 50,0
800 9,5 7,2 2,4 22,0 50,0
1000 7,6 5,8 1,8 18,0 50,0
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
49