Multidiscipline support systeM type MultiGrid™ - JT Day Pty Ltd

HOT WORK
COLD WORK
Mekano 100-4 & Details
Page 10
Page 12
Bracing Connector for 15-60°
Type: S-M SC-V-CH100-4-B
Art. No. 1372549 SS
SNI
4 x M10x130mm
Splice Connector
Type: S-M SC-CH100-5 SS
Art. No. SS 1372534 / HDG 1372535
Order two to splice one channel
SNI
8 x M10x130mm
Splice Connector L
Type: S-M SC-L-CH100-4
316L Art.No. 1372540
HDG Art No. 1372539 (NA Stock)
Patented, study the Nonie
principle page 61.
SNI
8 x M10x130mm
Bolted Main Steel connection
Range: HE240A/B – HE1000A/B
Fit all sizes from
HE240A/B to HE1000A/B
(& similar beam with
240-300mm flange-width)
Splice Connectors for channel 100-4
HDG SS Weight
Type Art. no Art. no. SS (kg)
S-M SC-100-5 1372535 1372534 1.2
To splice connect CH100-4 use 8 through-going bolts.
Type: S-M HE-NU-M10x130. Art. no.: 1372950 as bolt set with nut.
Bolted Starter
Type: BC-MS-CH100-4
316L Art. No. 1372520
Shim plates setup:
20mm – Thickness =
mm shim-plates needed.
(Shim Size:
2 a 3, 2 & 1mm)
SNI
6 x M16x65
Thickness
(HE240B)
Bolts 6 x M16x65
Mekano CH 100-4 as
alternative starter between stringers
Step 1. Plates (110x110x6mm x 2 ) to be welded to stringer.
Step 2. CH 100-4 to be placed and welded to plates.
Step 3. Apply masking tape. (Not covering welds!)
Minimum clearence 25mm
Adjustable by 5mm step sideways
63