Multidiscipline support systeM type MultiGrid™ - JT Day Pty Ltd

T-SUPPORT: CH100-2T-3mm MG-T: 04
A)
S-M WB-200-CH100-2
B)
Thickness
3 mm
C)
P y (KN)
Height
P y (KN)
P x (KN)
P x (KN)
Width
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-200-CH100-2 5 1,6 88619** 88618 1
B) Mekano Channel S-M CH100-2T3(*kg/m) 3 6* 1372190 1372185 1
C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 8
**) S-M WB-200-CH100-2 is delivered in carbon steel quality.
Mekano Channel CH100-2T3 (v) & CH100-2T3 (h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
1500 300 4,9 4,7 1,4 7,5 2,5
1500 600 3,6 2,7 0,9 7,5 2,5
1500 900 2,4 1,8 0,6 6 2
1500 1200 1,8 1,3 0,43 4,5 1,5
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
• Please note that the capacity calculation for T-support is for even loading on both sides.
53