Multidiscipline support systeM type MultiGrid™ - JT Day Pty Ltd

L-SUPPORT: CH 100-3-2,5mm
MG-L: 02
A)
S-M WB-ST-CH100-3
Thickness
2,5 mm
Height
B)
P y (KN)
C)
D)
E)
Width
P x (KN)
Items list:
Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts
A) Welded Starter S-M WB-ST-CH100-3 4 1,2 1372514** 1372515 2
B) Mekano Channel S-M CH100-3(*kg/m) 2,5 5,7* 1372504 1372505 1
C) Splice Connector L S-M SC-L-CH100-3 4 0,2 1372510 1372511 4
D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 44
E) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 1
**) S-M WB-ST-CH100-3 is delivered in carbon steel quality.
Load Capacity: Mekano Channel CH100-3-2,5(v) & CH100-3-2,5(h)
Height(mm) Width(mm) Capacity DW P y (KN) Piping P y (KN) Piping P x (KN) Blast P y (KN) Blast P x (KN)
600 200 10,8 4,0 1,6 12 6
600 400 6 2,7 0,9 8 5,4
600 600 3,3 1,7 0,6 5 5,4
• Norsk Standard code NS3472/Eurocode 03/Norsok.
• Capacity (KN) is calculated using point load on the centre of the horizontal support.
• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².
• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².
• Deflection allowance piping: L/300 or 3 mm. Most conservative used.
• Deflection allowance other disciplines: L/200
• Section properties are based on effective values reduced for perforations.
• For blast calculation p=450N/mm².
37