TH-V70R[B] revision - JVC

Getting started
Connecting the power cord
Make sure that all connections have been made, before plugging the power cords of the center unit and powered subwoofer.
LEFT
RIGHT
TO SP-PWV70
AUX IN
DIGITAL IN
CENTER
SPEAKER
CAUTION :
SPEAKER IMPEDANCE
4~16
FM 75
R
AM LOOP
L
OPTICAL
ANTENNA
AV
COMPU
LINK
AV
AV OUT
VIDEO OUT
VIDEO
LEFT
RIGHT
COAXIAL
AM EXT
H V
DISP.SET
RGB
Y / C
S-VIDEO
AC IN
CAUTION :
SPEAKER IMPEDANCE
REAR SPEAKERS
4~16
Center unit
1 Firmly insert the
supplied power cord into
the Ó AC IN socket on
the rear panel of the
center unit.
AC IN
Powered subwoofer
2 Plug the power cords into AC
outlets.
Plug into AC
outlets.
Power cord (supplied)
Power cord
CAUTIONS:
• Disconnect the power cord before cleaning or moving the system.
• Do not touch the power cord with wet hands.
• Do not pull on the power cord to unplug the cord.
When unplugging the cord, always grasp the plug so as not to damage the cord.
NOTES:
• Keep the power cords away from the connecting cords. The power cords may cause noise or screen interference.
• The preset settings such as preset stations, and sound adjustment may be erased in a few days in the following cases:
– When you unplug the power cord of the center unit.
– When a power failure occurs.
• The speakers will not produce any sound if the power cord of the powered subwoofer is removed from the AC outlet while the center unit is
turned on.
In this case, press AUDIO on the remote control or on the center unit to turn off the power, plug in the powered subwoofer, then
press AUDIO or again.
15