You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
To turn power off<br />
From the remote control: Press AUDIO again.<br />
On the center unit: Press again.<br />
The illumination lamps and the button name indications (except the indicator) go off.<br />
• When placing the center unit vertically, the moving panel closes.<br />
7 When the resume playback is set to “ON” (see page 66):<br />
If you turn off the power while playing back a disc, playback stops and the position where playback has been stopped is<br />
stored.<br />
To resume playback from the stored position, press DVD or PLAY on the remote control. (See below and page 29.)<br />
If you press AUDIO (or on the center unit), the stored position is erased.<br />
NOTES:<br />
• The power supply to the subwoofer is linked to the center unit. The POWER ON lamp on the subwoofer lights in green when the power is turned on.<br />
• A small amount of power is consumed even though the power is turned off (called standby mode). Remove the power cord from the AC outlet<br />
to turn off the power supply completely.<br />
• You can also turn on the system by pressing 0 on the center unit or one of the source selecting buttons on the remote control. See below and<br />
page 28.<br />
• The resume playback dose not work for Audio CDs.<br />
Selecting the source to play<br />
From the remote control:<br />
Press one of the source selecting buttons (DVD, FM/AM, and AUX).<br />
DVD: Select the DVD player, and the remote control can be used to operate the DVD player. (See pages 27 and 41.)<br />
FM/AM: Select an FM or AM (MW) broadcast, and the remote control can be used to operate the tuner. (See page 31.)<br />
• Each time you press the button, the band alternates between FM and AM (MW).<br />
AUX: Select a component connected to the AUX IN jacks or DIGITAL IN jack. (See page 14.)<br />
• Each time you press the button, the source alternates between “AUX” and “AUX DIGITAL.”<br />
On the center unit:<br />
Press SOURCE repeatedly until the source name you want appears on the<br />
display.<br />
Each time you press the button, the source changes as follows.<br />
] DVD ] AM ] FM ] AUX ] AUX DIGITAL ] (back to the beginning)<br />
The selected source name appears on the display window.<br />
Example: When “AUX” is selected.<br />
L<br />
R<br />
When AM, FM, AUX, or AUX DIGITAL is selected as the source to play, this indication appears if a disc is<br />
inserted. (See page 28.)<br />
NOTES:<br />
• When the system is in standby mode, pressing one of the source selecting buttons on the remote control also turns on the system.<br />
• When the resume playback is set to “ON” (see page 66), if you change the source during playback, playback stops and the position where<br />
playback has been stopped is stored. Next time you select DVD as the source or if you press PLAY (or 3 on the center unit) to start playback,<br />
playback starts from the stored potision (the resume playback).<br />
Adjusting volume<br />
You can adjust the volume level within the range from “0” (minimum) to “70” (maximum).<br />
From the remote controls: Press VOLUME + or –.<br />
On the center unit: Press VOL + or –.<br />
• Press + to increase volume.<br />
• Press – to decrease volume.<br />
The volume level appears on the display window.<br />
CAUTION:<br />
Always set the volume to the minimum before starting any source.<br />
If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.<br />
22