Instructions for Use - Glyco Kit MB-LAC Con A - Bruker
Instructions for Use - Glyco Kit MB-LAC Con A - Bruker
Instructions for Use - Glyco Kit MB-LAC Con A - Bruker
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8. 1 µl of the turbid suspension has to be<br />
spotted on an AnchorChip TM 600 target<br />
without generating air bubbles.<br />
Spot 1 µl<br />
9. After drying of the spots the target can<br />
be transferred to the MALDI-TOF MS<br />
<strong>for</strong> measurements.<br />
Dry the spot<br />
Analysis of glycopeptides using 2,5-DHB<br />
For preparation of glycopeptides (e.g. after proteolytic digest of the glycoprotein) within the mass<br />
range of 1 – 10 kDa we recommend the use of AnchorChip 600 targets (#209513) or polished<br />
steel targets (#209520) and 2,5-Dihydroxybenzoic acid (DHB, #201346 or #203074) as matrix.<br />
2,5-DHB preparation on AnchorChip600 targets<br />
1. Dissolve 5 mg DHB in 300 µl<br />
acetonitrile<br />
: DHB is harmful (R: 22-36/37/38;<br />
S: 26-28-36/37-60), acetonitrile is<br />
highly flammable and harmful (R: 11-<br />
20/21/22-36; S: (1/2)-16-36/37)<br />
5 mg DHB<br />
300 µl acetonitrile<br />
2. Add 700 µl TFA (0.1 %) 700 µl 0.1 %TFA<br />
3. Vortex <strong>for</strong> 1 min at RT Vortex<br />
4. Sonificate <strong>for</strong> 15 min Sonificate<br />
5. 1 µl of the freshly prepared matrix has to<br />
be spotted onto an AnchorChip 600<br />
target<br />
Spot 1 µl matrix<br />
6. After drying spot 1 µl of sample onto the<br />
matrix<br />
Spot 1 µl sample<br />
Page 14 of 21