NETWORK VIDEO RECORDER - Samsung

More documents

Recommendations

Info

installation 1. First, loosen the screws on both sides and remove the cover. Cover 2. Loosen the screws (x4) in the left/right and upper sides and remove the upper brackets. Upper Bracket Lower Bracket 3. Install HDDs (x4) on the lower bracket and fix them with screws. 4. Install HDDs (x4) on the upper bracket and fix them with screws. Upper Bracket Lower Bracket 14_ installation
5. When the installation of additional HDDs is done, insert the lower and upper brackets into the NVR and fix them with the provided screws. ● INSTALLATION 6. When adding a HDD is completed, plug the power cable and connect the SATA cable (for transferring the HDD signal) to the connector ~ 8 of the main board. ` Note that the order the HDD data cable is connected will not affect the operation. The only consideration is the length of each cable. 8 7 7. Check if the connectors are properly connected and there is no problem with wiring, and close the cover and fix it with screws. Cover English _15
Page 1 and 2: NETWORK VIDEO RECORDER User Manual
Page 3 and 4: overview IMPORTANT SAFETY INSTRUCTI
Page 5 and 6: System Shutdown Turning off the pow
Page 7 and 8: SEARCH VIEWER 46 46 Search Viewer M
Page 9 and 10: REC HDD ALARM NETWORK POWER Package
Page 11 and 12: PART NAMES AND FUNCTIONS (REAR) NO
Page 13: RACK INSTALLATION Install the Brack
Page 17 and 18: Connecting the Alarm Input/Output T
Page 19 and 20: NOT ALARM OUT 1 2 3 4 NO G ALARM NO
Page 21 and 22: Item Protocol Description Network
Page 23 and 24: 3. Enter the password. This is the
Page 25 and 26: REC HDD ALARM NETWORK POWER startin
Page 27 and 28: CONNECTING WEB VIEWER 1. Open your
Page 29 and 30: Differences on Using the Web Viewer
Page 31 and 32: Checking Direct3D for Normal Operat
Page 33 and 34: Menu Description Capture Saves curr
Page 35 and 36: Menu Description Camera Title / Cha
Page 37 and 38: Changing Split Mode When clicking t
Page 39 and 40: Switching the split mode You can pl
Page 41 and 42: To capture a screen 1. Click < > bu
Page 43 and 44: To set a preset 1. Click < > button
Page 45 and 46: Live Status Select from the live s
Page 47 and 48: Item Overlapping Data Displays Desc
Page 49 and 50: Item Description Stop Stops playin
Page 51 and 52: SYSTEM SETUP You can setup Date/Tim
Page 53 and 54: • ID : Change the admin ID. • P
Page 55 and 56: Setting the users You can add a use
Page 57 and 58: System Manage You can confirm the v
Page 59 and 60: • Export : Exports NVR settings t
Page 61 and 62: • Connection : Display the connec
Page 63 and 64: • IP : Provide the IP address of
Page 65 and 66:
Camera Setting You can change the v
Page 67 and 68:
• No. : Shows the assigned number
Page 69 and 70:
SETTING THE RECORDING You can setup
Page 71 and 72:
• Full Frame : Shows the amount o
Page 73 and 74:
SETTING THE EVENT You can configure
Page 75 and 76:
Video loss detection You can set th
Page 77 and 78:
Setting the Network Connection with
Page 79 and 80:
Setting Port ● MENU SETUP • Pro
Page 81 and 82:
DDNS Setting DDNS is a short form o
Page 83 and 84:
Live Streaming You can configure th
Page 85 and 86:
Group Setting You can set the group
Page 87 and 88:
Item Details Network Interface RJ-4
Page 89 and 90:
PRODUCT OVERVIEW unit : mm (inches)
Page 91 and 92:
Category Details Factory Default Ev
Page 93 and 94:
TROUBLESHOOTING Problem Action The
Page 95 and 96:
Problem Action Frame rate of the ac
Page 97 and 98:
1. You may copy and distribute verb
Page 99 and 100:
TERMS AND CONDITIONS 0. Definitions
Page 101 and 102:
All other non-permissive additional
Page 103 and 104:
We call this license the “Lesser
Page 105 and 106:
14. If you wish to incorporate part
Page 107:
The copyright notices in the Softwa
Page 116:
SALES NETWORK SAMSUNG TECHWIN CO.,
show all

NETWORK VIDEO RECORDER - Samsung

Create successful ePaper yourself

Delete template?

Save as template?