NETWORK VIDEO RECORDER - Samsung

More documents

Recommendations

Info

appendix Category Details Factory Default DDNS Network1 DDNS Site OFF Network2 DDNS Site OFF Filtering Type Deny IP Filtering Use OFF IP Address 0.0.0.0 Prefix 32 IEEE 802.1x OFF EAPOL Version 1 Network1 CA Certificates Not Available Clint Certificates Not Available Clint Private Key Not Available 802.1x IEEE 802.1x OFF Network EAPOL Version 1 Network2 CA Certificates Not Available Clint Certificates Not Available Clint Private Key Not Available Server Address SMTP Port 25 Use Authentication OFF Secure Transfer Never E-mail Event Interval 10 min Event Use Event Transfer OFF Group Group OFF Recipient Permission OFF 92_ appendix
TROUBLESHOOTING Problem Action The system does not turn on and the indicator on the front panel does not work at all. Video input is connected, but some channels do not display corresponding videos. • Check if the power supply system is properly connected. • Check the system for the input voltage from the power source. • If the problem persists even after you have taken the above actions, check the power supplier and replace it with a new one if neccessary. • Check inside if the cables are properly connected. (SMPS, FRONT) • Check if the camera is properly supplied with power. • Check the video output connecting the camera's webviewer. • Check if the network port is properly connected and the network setting is set correctly. • Replace the hub connected to your network with one supporting Gigabit communication. Video output complies with the specification of the connected hub. • Check the item in tab of the Web Viewer. If network bandwidth is set too low, video may not properly display. ● APPENDIX Pressing button on the Live Viewer does not turn on REC LED and does not start recording. The cursor will not move to the Start button when I start the calendar search. Cannot stop alarm by pressing the < > button of the Web Viewer, due to continuing alarm events. No response controlling PTZ in the live viewer The camera is not connected or the PC fails to connect to the product. The Live screen is too bright or too dark. • Check if there is a free space on the HDD for the recording. • Check if the record mode is set to ON in the record mode setting. • Check if the channel and the date that you want to play are marked with the V symbol. Both channel and date should be checked before you can start playing with the Start button. • Modify the setup in tab of the Web Viewer. 1) To stop alarm sound : Event Recording Mode – Alarm (camera event/ video loss) – Delete the Alarm Out. 2) To stop event : Event Recording Mode – Alarm (camera event/video loss)- Turn off the mode. • Check the registered Camera if it support PTZ function. • Check if the network cable is connected properly. • Ensure that you have set – . • Check the IP setting of the PC or camera. • Try the Ping Test. • Check if there is a different device near the product uses the same IP. • Check the video settings of the registered camera. English _93
Page 1 and 2:
NETWORK VIDEO RECORDER User Manual
Page 3 and 4:
overview IMPORTANT SAFETY INSTRUCTI
Page 5 and 6:
System Shutdown Turning off the pow
Page 7 and 8:
SEARCH VIEWER 46 46 Search Viewer M
Page 9 and 10:
REC HDD ALARM NETWORK POWER Package
Page 11 and 12:
PART NAMES AND FUNCTIONS (REAR) NO
Page 13 and 14:
RACK INSTALLATION Install the Brack
Page 15 and 16:
5. When the installation of additio
Page 17 and 18:
Connecting the Alarm Input/Output T
Page 19 and 20:
NOT ALARM OUT 1 2 3 4 NO G ALARM NO
Page 21 and 22:
Item Protocol Description Network
Page 23 and 24:
3. Enter the password. This is the
Page 25 and 26:
REC HDD ALARM NETWORK POWER startin
Page 27 and 28:
CONNECTING WEB VIEWER 1. Open your
Page 29 and 30:
Differences on Using the Web Viewer
Page 31 and 32:
Checking Direct3D for Normal Operat
Page 33 and 34:
Menu Description Capture Saves curr
Page 35 and 36:
Menu Description Camera Title / Cha
Page 37 and 38:
Changing Split Mode When clicking t
Page 39 and 40:
Switching the split mode You can pl
Page 41 and 42: To capture a screen 1. Click < > bu
Page 43 and 44: To set a preset 1. Click < > button
Page 45 and 46: Live Status Select from the live s
Page 47 and 48: Item Overlapping Data Displays Desc
Page 49 and 50: Item Description Stop Stops playin
Page 51 and 52: SYSTEM SETUP You can setup Date/Tim
Page 53 and 54: • ID : Change the admin ID. • P
Page 55 and 56: Setting the users You can add a use
Page 57 and 58: System Manage You can confirm the v
Page 59 and 60: • Export : Exports NVR settings t
Page 61 and 62: • Connection : Display the connec
Page 63 and 64: • IP : Provide the IP address of
Page 65 and 66: Camera Setting You can change the v
Page 67 and 68: • No. : Shows the assigned number
Page 69 and 70: SETTING THE RECORDING You can setup
Page 71 and 72: • Full Frame : Shows the amount o
Page 73 and 74: SETTING THE EVENT You can configure
Page 75 and 76: Video loss detection You can set th
Page 77 and 78: Setting the Network Connection with
Page 79 and 80: Setting Port ● MENU SETUP • Pro
Page 81 and 82: DDNS Setting DDNS is a short form o
Page 83 and 84: Live Streaming You can configure th
Page 85 and 86: Group Setting You can set the group
Page 87 and 88: Item Details Network Interface RJ-4
Page 89 and 90: PRODUCT OVERVIEW unit : mm (inches)
Page 91: Category Details Factory Default Ev
Page 95 and 96: Problem Action Frame rate of the ac
Page 97 and 98: 1. You may copy and distribute verb
Page 99 and 100: TERMS AND CONDITIONS 0. Definitions
Page 101 and 102: All other non-permissive additional
Page 103 and 104: We call this license the “Lesser
Page 105 and 106: 14. If you wish to incorporate part
Page 107: The copyright notices in the Softwa
Page 116: SALES NETWORK SAMSUNG TECHWIN CO.,
show all

NETWORK VIDEO RECORDER - Samsung

Create successful ePaper yourself

Delete template?

Save as template?