Quick Guide [Print Operations]

Installing the printer driver
2
Automatic installation using the installer
With the installer, this machine is detected to determine whether it is connected
by USB or is on the same TCP/IP network as the computer, and then
the required printer is automatically installed. You can also manually specify
the printer driver to be installed.
2
Note
Since this machine is automatically detected with a network connection,
be sure to set the IP address of this machine before connecting it. For details
on specifying the settings, refer to “Setting the IP address for this
machine” of the User’s Guide [Print Operations].
When installing on Windows NT 4.0, 2000, XP, or Server 2003, administrator
permissions are required.
If the wizard starts up in order to add new hardware with a USB or parallel
connection, click [Cancel].
For IPP printing, it is not necessary to install the printer driver at this time
since IPP printing setup is performed when the printer driver is installed.
For further details on IPP printing, refer to “IPP printing (Windows 2000/
XP/Server 2003)” of the User’s Guide [Print Operations].
Installer operating environment
Item
Operating system
Processor
Memory
Operating environment
Windows 98 SE, Windows Me, Windows NT 4.0 (Service Pack 6a
or later), Windows 2000 Professional (Service Pack 4 or later),
Windows XP Home Edition (Service Pack 1 or later), Windows XP
Professional (Service Pack 2 or later), or Windows Server 2003
Pentium 300 MHz or higher recommended
64 MB or more (128 MB or more recommended)
* With Windows NT 4.0, in order to install a machine that is connected directly to a network using
the TCP/IP protocol, Microsoft TCP/IP Printing Service must first be installed on the computer
being used.
200/250/350 2-3