Instructions for Use, Manual JURA IMPRESSA Z5 - Esperanza

7 Maintenance
Starting cappuccino
cleaning manually
Cleaning the cappuccino
nozzle after prompt
Precondition: COFFEE READY is shown on the display.
k T Keep the Rotary Switch pressed until MAINTENANCE
appears.
k T Press the Rotary Switch to enter the programme item.
CAPPUCCINO CLEANING
k T Press the Rotary Switch.
CLEANER FOR CAPPUCCINO / PRESS BUTTON
T Pour 250 ml of fresh water into a container and add one
capful (max. 15 ml) of Auto-Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
T Turn the selection lever to the milk foam position p or
milk t.
T Place another receptacle under the cappuccino nozzle.
c T Press the maintenance button.
CAPPUCCINO CLEANING, the nozzle and pipe are
cleaned.
WATER FOR CAPPUCCINO / PRESS BUTTON
T Rinse the receptacle thoroughly, fill it with approx. 250 ml
of fresh water and immerse the milk pipe in the water.
T Empty the receptacle and place it under the nozzle once
more.
c T Press the maintenance button.
CAPPUCCINO CLEANING, the nozzle and pipe are
rinsed with fresh water.
COFFEE READY appears on the display. Your IMPRESSA
is once more ready to use.
If milk has been prepared, but the cappuccino nozzle has not been
cleaned, the CLEAN MILK SYSTEM prompt is displayed when
the machine is switched off. The maintenance programme can be
started by pressing the maintenance button c.
Precondition: CLEANER FOR CAPPUCCINO / PRESS
BUTTON appears on the screen and the maintenance button c
lights up.
T Continue with the fourth prompt to take action (indicated
by a T), as is described under ‘Start cappuccino cleaning
manually’.
69