Daf LF.book - Peterbilt Motors Company

Cab, Instruments and Controls
7. ASHTRAY
In the centre console is an ashtray with lighter for the driver and co-driver.
The lighter plug can also be used as a 24V power supply for a 24V inspection lamp,
for example. Do not connect any consumer above 180 Watt.
To remove the ashtray, there are two springs on the top of the tray which should be
pressed in, after which the tray can be removed.
8. HAZARD WARNING LIGHTS
When this switch is pressed, all the direction indicator lights flash simultaneously.
The hazard warning lights are switched off by depressing the switch again. The
warning light in the switch indicates that the hazard warning is switched on.
9. WORK LAMP/LOADSPACE LIGHTING
This switch operates the lighting at the rear of the cab or in the loadspace.
10. MIRROR/WINDSCREEN HEATING
With the switch for mirror/windscreen heating in the centre console, the exterior
mirrors (excluding the kerb mirror) and the windscreen heating, if fitted, can be
heated.
When you press the switch again, the mirror heating is switched off while the
windscreen heating remains active for about 12 minutes.
If you press the switch again within 12 minutes, the windscreen heating is switched
off and the mirror heating is switched on again. Operate the switch once more to
switch everything off.
80