61 Tabletop Stand: PDK-TS01 - Pioneer

More documents

Recommendations

Info

Wall-mounted tiltable plasma display hardware <strong>PDK</strong>-5011 4.7.5 Measure to prevent shakiness when the unit is installed at a slight inclination With this installation hardware, for structural reasons, shakiness occurs in the forward -backward direction at the top of the Plasma Display when the unit is installed at a slight inclination up to 5° from the vertical position. If this shakiness is a problem, reduce it by following the instructions provided below. 3 If, when it is moved only forward, the distance is too short, rotate the resin plate to use the long-side direction. 1 Use a Philips driver (+) to loosen (left, right) the installation screws on the resin plate used as a guideline when installing it vertically (left, right) so that the resin plate can move freely. Rotated Resin plate 4 After setting the resin plate (left, right) in position, retighten the screws that you loosened at step (1). 2 Slide the resin plate (left, right) forward along the slit to the rear cover of the plasma display. Rear cover of the plasma display You can use above method to reduce the shakiness that occurs when it is installed at a slight angle. Slid forward 72
Wall-mounted tiltable plasma display hardware <strong>PDK</strong>-5011 73
Page 1 and 2: Tabletop Stand: PDK-TS01 Regarding
Page 3 and 4: Tabletop Stand: PDK-TS01 After asse
Page 5 and 6: PDP Bracket: PDK-5005 4.6.2 Externa
Page 7 and 8: PDP Bracket: PDK-5005 3 Place the b
Page 9 and 10: Wall-mounted tiltable plasma displa
Page 11: Wall-mounted tiltable plasma displa
Page 15 and 16: R 672 Plasma Display Ceiling Suspen
Page 17 and 18: Plasma Display Ceiling Suspension H
Page 19 and 20: Plasma Display Ceiling Suspension H
Page 21 and 22: Wall-mounted type tiltable fixed pl
Page 23 and 24: Wall-mounted type tiltable fixed pl
Page 25 and 26: Mobile Cart: PDK-5014 4.10.2 Extern
Page 27 and 28: Mobile Cart: PDK-5014 2 Attaching b
Page 29 and 30: Mobile Cart: PDK-5014 6 Adjusting t
Page 31 and 32: Cable Cover: PDA-P01 4.11.5 How to
Page 33 and 34: Speaker System: PDP-S05-LR 4.12.2 E
Page 35 and 36: Speaker System: PDP-S05-LR 2) Conne
Page 37 and 38: Before Beginning Adjustments 3 Inte
Page 39 and 40: Before Beginning Adjustments 2) Inp

61 Tabletop Stand: PDK-TS01 - Pioneer

Create successful ePaper yourself

Delete template?

Save as template?