61 Tabletop Stand: PDK-TS01 - Pioneer
61 Tabletop Stand: PDK-TS01 - Pioneer
61 Tabletop Stand: PDK-TS01 - Pioneer
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Plasma Display Ceiling Suspension Hardware: <strong>PDK</strong>-5012<br />
4.8.4 Assembly procedure<br />
1 Attach the PDP bracket to the plasma display.<br />
3 Attach the plasma display to the hanger.<br />
Warning<br />
• Cover the display with a sheet or similar protective<br />
material to protect it from scratches or other damage.<br />
• Be careful that the PDP bracket is not upside down.<br />
PDP bracket<br />
Top side of plasma display<br />
Hanger<br />
4 Screw the plasma display to the hanger (at 4 locations).<br />
Plasma display<br />
2 Fix the plasma display to the PDP bracket with screws<br />
(6 locations).<br />
Warning<br />
Be sure to use the holes (hole positions on the diagram)<br />
shown on [50] to attach the PDP503CMX or PDP-<br />
503MXE.<br />
Top side of plasma displa<br />
Hexagonal bolts<br />
(6 holes shown on [50])<br />
77
Change language