61 Tabletop Stand: PDK-TS01 - Pioneer

More documents

Recommendations

Info

Plasma Display Ceiling Suspension Hardware: PDK-5012 4.8.5 Angle setup Left-right Adjustment You can adjust it 45° to the left or right by loosening the top screw. Set the desired angle, then tighten the screw. Vertical Adjustment You can adjust its vertical angle by loosening the screws on the left and right sides. (You can adjust it a maximum of 25° downwards from the vertical position.) Set it to the desired angles while supporting the plasma display and retighten the loosened screws on the left and right sides. The hole on the side indicates the angle. (5° units). Detailed Angle Standard Diagram Connecting cable (when coming out of the top of the supporting column) 5° 10° 15° 25° Hole Connecting cable (when coming out of the hole) To the connector on the plasma display 78
Plasma Display Ceiling Suspension Hardware: PDK-5012 79
Page 1 and 2: Tabletop Stand: PDK-TS01 Regarding
Page 3 and 4: Tabletop Stand: PDK-TS01 After asse
Page 5 and 6: PDP Bracket: PDK-5005 4.6.2 Externa
Page 7 and 8: PDP Bracket: PDK-5005 3 Place the b
Page 9 and 10: Wall-mounted tiltable plasma displa
Page 15 and 16: R 672 Plasma Display Ceiling Suspen
Page 17: Plasma Display Ceiling Suspension H
Page 21 and 22: Wall-mounted type tiltable fixed pl
Page 23 and 24: Wall-mounted type tiltable fixed pl
Page 25 and 26: Mobile Cart: PDK-5014 4.10.2 Extern
Page 27 and 28: Mobile Cart: PDK-5014 2 Attaching b
Page 29 and 30: Mobile Cart: PDK-5014 6 Adjusting t
Page 31 and 32: Cable Cover: PDA-P01 4.11.5 How to
Page 33 and 34: Speaker System: PDP-S05-LR 4.12.2 E
Page 35 and 36: Speaker System: PDP-S05-LR 2) Conne
Page 37 and 38: Before Beginning Adjustments 3 Inte
Page 39 and 40: Before Beginning Adjustments 2) Inp

61 Tabletop Stand: PDK-TS01 - Pioneer

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?