fujiyama user manual - Protsurv.co.za

More documents

Recommendations

Info

FUJIYAMA USER MANUAL 5.5 Setting of Mode of Distance Measurement There are three modes of distance measurement: Fine Measurement, Tracking and Single Measurement. The memory doesn’t save this setting after powering off. The default setting is Fine Measurement. Mode of Fine Measurement:Normally it will be used. Higher accuracy, much time. Measuring time:
FUJIYAMA USER MANUAL This mode is useful when it is difficult to set up the prism directly, for example at the center of a tree. Place the prism at the same horizontal distance from the instrument as that of point A0 to measure. To measure the coordinates of the center position, operate the offset measurement after setting the instrument height/prism height. When measuring coordinates of ground point A1: Set the instrument height/Prism height. When measuring coordinates of point Ao :Set the instrument height only(Set the prism height to 0). Confirm the instrument is in the mode of distance measurement. Operation Procedure Operation Display Press[F4]to enter into the mode of distance measurement, page 3,in the mode of distance measurement. [F4] V↑: HR : 122°09′30″ 90°09′30″ (CT) SD : 336.551 m OFFSET Press[F1](OFFSET) [F1] HR : 90°09′30″ HD : MEAS ---- ---- ENTER 23
Page 1 and 2: FUJIYAMA USER MANUAL 1
Page 3 and 4: FUJIYAMA USER MANUAL Contents Brief
Page 5 and 6: FUJIYAMA USER MANUAL 1. Description
Page 7 and 8: FUJIYAMA USER MANUAL Symbol Content
Page 9 and 10: FUJIYAMA USER MANUAL Page 2 (P2) F1
Page 11 and 12: FUJIYAMA USER MANUAL 2) Place the I
Page 13 and 14: FUJIYAMA USER MANUAL Input -、D、
Page 15 and 16: FUJIYAMA USER MANUAL 3.Press[F1]or[
Page 17 and 18: FUJIYAMA USER MANUAL 1. Setting by
Page 19 and 20: FUJIYAMA USER MANUAL 5. DISTANCE ME
Page 21: FUJIYAMA USER MANUAL 3)Measuring r
Page 25 and 26: FUJIYAMA USER MANUAL F2:VD F3:SD Ex
Page 27 and 28: FUJIYAMA USER MANUAL Press[F1] to e
Page 29 and 30: FUJIYAMA USER MANUAL INSTRUMENT HEI
Page 31 and 32: FUJIYAMA USER MANUAL Operation Proc
Page 33 and 34: FUJIYAMA USER MANUAL [F1] Press[F4]
Page 35 and 36: FUJIYAMA USER MANUAL 6.5 Coordinate
Page 37 and 38: FUJIYAMA USER MANUAL MENU Press[F4]
Page 39 and 40: FUJIYAMA USER MANUAL 1)Press[F1](IN
Page 41 and 42: FUJIYAMA USER MANUAL C/0523 means t
Page 43 and 44: FUJIYAMA USER MANUAL BACKSIGHT SET
Page 45 and 46: FUJIYAMA USER MANUAL ●It shows E-
Page 47 and 48: FUJIYAMA USER MANUAL Press[F2](LIST
Page 49 and 50: FUJIYAMA USER MANUAL INSTRUMENT HEI
Page 51 and 52: FUJIYAMA USER MANUAL AZIMUTH ANGLE
Page 53 and 54: FUJIYAMA USER MANUAL horizontal ang
Page 55 and 56: FUJIYAMA USER MANUAL Press[F4](ENTE
Page 57 and 58: FUJIYAMA USER MANUAL Select file of
Page 59 and 60: FUJIYAMA USER MANUAL Press[F1](NEXT
Page 61 and 62: FUJIYAMA USER MANUAL PROGRAMS Press
Page 63 and 64: FUJIYAMA USER MANUAL Aim ground [F4
Page 65 and 66: FUJIYAMA USER MANUAL Press to show
Page 67 and 68: FUJIYAMA USER MANUAL 2. Area calcul
Page 69 and 70: FUJIYAMA USER MANUAL File No. : the
Page 71 and 72: FUJIYAMA USER MANUAL Press[F4](P↓
Page 73 and 74:
FUJIYAMA USER MANUAL 10.4 Delete Co
Page 75 and 76:
FUJIYAMA USER MANUAL Press[F1]to en
Page 77 and 78:
FUJIYAMA USER MANUAL DELETE ALL FIL
Page 79 and 80:
FUJIYAMA USER MANUAL Example:Change
Page 81 and 82:
FUJIYAMA USER MANUAL Press[F3]to sa
Page 83 and 84:
FUJIYAMA USER MANUAL get reading of
Page 85 and 86:
FUJIYAMA USER MANUAL 12.5 Accuracy
Page 87 and 88:
FUJIYAMA USER MANUAL vial with adju
Page 89 and 90:
FUJIYAMA USER MANUAL 13.6 Check & A
Page 91 and 92:
FUJIYAMA USER MANUAL Minimum readin
Page 93 and 94:
FUJIYAMA USER MANUAL FUJIYAMA QUICK
Page 95:
FUJIYAMA USER MANUAL 6.Search for c
show all

fujiyama user manual - Protsurv.co.za

Create successful ePaper yourself

Delete template?

Save as template?