fujiyama user manual - Protsurv.co.za
fujiyama user manual - Protsurv.co.za
fujiyama user manual - Protsurv.co.za
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
FUJIYAMA USER MANUAL<br />
Range of inputting <strong>co</strong>ordinate::<br />
-999999.999m≤ N、E ≤+999999.999m<br />
-9999.999m≤ Z ≤+9999.999m<br />
-999999.999ft≤ N、E ≤+999999.999ft<br />
-9999.999ft≤ Z ≤+9999.999ft<br />
2)Setting up stating measurement by using <strong>co</strong>ordinate file in the memory.(It shows angle<br />
measurement)<br />
Make sure the mode is Angle measurement<br />
Operation Procedure Operation Display<br />
Press<br />
(COORDINATE)to enter into mode<br />
of <strong>co</strong>ordinate measurement.<br />
N: 0.000m<br />
E: 0.000m<br />
Z: 0.000m<br />
MEAS SET S/A<br />
Press[F2]<br />
[F2]<br />
SELECT FILE<br />
FILE:<br />
---- LIST SKP ENTER<br />
Press[F2](LIST)several times to select file<br />
name of <strong>co</strong>ordinate.<br />
Press[F4](ENTER)to enter into the mode of<br />
setting screen.<br />
[F3]<br />
[F4]<br />
SELECT FILE<br />
FILE: DAD[USED]<br />
---- LIST SKP ENTER<br />
SET<br />
F1:STATION SETUP<br />
F2:BACKSIGHT<br />
F3:R.HT<br />
Press[F1]to enter into the screen of inputting<br />
instrument height.<br />
[F1]<br />
INSTRUMENT HEIGHT INPUT<br />
INS.HT: -0.001m<br />
INPUT ---- ---- ENTER<br />
28