fujiyama user manual - Protsurv.co.za
fujiyama user manual - Protsurv.co.za
fujiyama user manual - Protsurv.co.za
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
FUJIYAMA USER MANUAL<br />
3)Setting up back sight by inputting azimuth angle.<br />
Select file of data <strong>co</strong>llection(Refer to 7.3 to select file of data <strong>co</strong>llection)<br />
Operation Procedure Operation Display<br />
COLLECTION<br />
Go to the mode of data <strong>co</strong>llection<br />
F1:STATION SETUP<br />
F2:BACKSIGHT<br />
F3:COLLECTION<br />
Press[F2]to enter into the screen of<br />
setting back sight.<br />
[F2]<br />
BACKSIGHT SET<br />
USED FILE:DAD<br />
C/0523 M/0599<br />
SRCH ---- HSET<br />
Press[F3] to enter into the mode of<br />
horizontal angle setting.<br />
Input azimuth angle you want to<br />
input.<br />
[F3]<br />
H ANGLE SET (DEG)<br />
HR: =|<br />
DEL --- 123 ENTER<br />
H ANGLE SET (DEG)<br />
HR: =123.5540|<br />
Press[F4](ENTER)to enter into the<br />
screen of azimuth angle setting.<br />
HR: azimuth angle by calculated<br />
hr: true azimuth angle<br />
[F4]<br />
AZIMUTH ANGLE SET<br />
HR :57°13′48″<br />
>hr :157°33′48″<br />
SET ---- ---- EXIT<br />
Press[F1](SET)to make HR is as<br />
same as hr.<br />
[F1]<br />
AZIMUTH ANGLE SET<br />
HR :57°13′48″<br />
>hr :57°13′48″<br />
SET ---- ---- ENTER<br />
Press[F4](ENTER)to escape.<br />
[F4]<br />
COLLECTION<br />
F1:STATION SETUP<br />
F2:BACKSIGHT<br />
F3:COLLECTION<br />
44
Change language