Manual instruction - Pallet truck scales - Radwag

More documents

Recommendations

Info

9.4. Weighings in two ranges Switching between the I range and the II range happens automatically (exceeding Max of the I range). Weighings in the second range is signalled by a pictogram in the top left corner of the display. Then weighings is done with the accuracy of the II range to the moment of returning to zero (autozero range ) where the scale switches back to the I range. 9.5. Selection of basic weight unit This function is used to set weight unit the scale will start with. Procedure: • Enter the submenu and then: • press , until the expected unit appears on the display: - 16 -
Options: A. When the basic unit is [kg], users can toggle between: [kg, lb, N], for verified <strong>scales</strong> [lb] is not accessible; B. If the basic unit is [g], users can toggle between: [g, ct, lb], for verified <strong>scales</strong> [lb] is not accessible. • After you select the unit press , the scale returns to: • Return to weighing according to chapter - 8.2.2. Notice: After turning on the scale always sets the basic unit. 9.6. Temporarily selected unit This function is used to set weight unit the scale will use temporarily until the next power off or next selection. Procedure: • Press and then: - 17 -
Page 1 and 2: User Manual Pallet truck scales Man
Page 3 and 4: TABLE OF CONTENTS 1. INTENDED USE .
Page 5 and 6: 1. INTENDED USE WWC scales with a h
Page 7 and 8: Measured load should be placed unif
Page 9 and 10: 3. CONDITIONS OF SAFE OPARATION •
Page 11 and 12: 7. INSCRIPTIONS ON THE DISPLAY No T
Page 13 and 14: 8.2. Browsing user menu Use scale
Page 15: • Using and set the tare value,
Page 19 and 20: Notice: Filtering level influences
Page 21 and 22: 10.4. Tare function This parameters
Page 23 and 24: Pr_n noStAb - immediate printout (n
Page 25 and 26: Return to weighing: see 8.2.2. 11.4
Page 27 and 28: Return to weighing: See 8.2.2. Noti
Page 29 and 30: * automatic enabling/disabling acco
Page 31 and 32: 12.4.3. Accumulator charging option
Page 33 and 34: 13.2. Selecting quantity of operati
Page 35 and 36: • If option is choosen in the sc
Page 37 and 38: • The inscribed value confirm by
Page 39 and 40: Return to weighing: • Press the k
Page 41 and 42: 13.7. Measurement max force on the
Page 43 and 44: • Take off the load from the pan,
Page 45 and 46: 13.9. Weighing animals Procedure:
Page 47 and 48: • The program goes to displaying
Page 49 and 50: 14. USER CALIBRATION Only for non-v
Page 51 and 52: 14.2. Start mass adjustment If the
Page 53 and 54: 16. COOPERATION WITH COMPUTER Sendi
Page 55 and 56: 17.3. Respond message format After
Page 57 and 58: Frame format: 1 2-3 4 5 6 7-15 16 1
Page 59 and 60: 17.4.8. Switch on continuous transm
Page 61 and 62: Stability character sign mass unit
Page 63 and 64: NULL - Zero value from the AD conve
Page 65: MANUFACTURER OF ELECTRONIC WEIGHING

Manual instruction - Pallet truck scales - Radwag

Create successful ePaper yourself

Delete template?

Save as template?