Manual instruction - Pallet truck scales - Radwag

- In order to continue the procedure press , the indication
returns to ZERO and the letter „P” appears in the left part
of the display. The scale is ready for weighing.
- In order to terminate the previous totalizing procedure press
key, , or . You will see the letter „P” in the left part of the
display. The scale is ready for weighing.
13.8.4. Return to weighing
• Press
key, you will see:
• Before leaving the function it is possible to print out
subsequent weighings and the sum of weighings on the
connected printer (press to print, press to cancel),
• The following message will appear on the display:
• Press
• Press
key to return to weighing,
to return to totalizing.
Notice:
In case of overflow of the range of the display in totalizing you will see
message in the display. In that case unload the pan and press
PRINT to complete the procedure with a printout of sum of all weighings
or put a lower mass on the pan which does not cause the overflow error.
- 44 -