Manual instruction - Pallet truck scales - Radwag

More documents

Recommendations

Info

10.3. Autozero function The autozero function has been implemented in order to assure precise indications. This function controls and corrects „0” indication. While the function is active it compares the results continuously with constant frequency. If two sequentional results differ less than the declared value of autozero range, so the scale will be automatically zeroed and the pictograms and will be displayed. When AUTOZERO is disabled zero is not corrected automatically. However, in particular cases, this function can disrupt the measurement process e.g. slow pouring of liquid or powder on the weighing pan. In this case, it is advisable to disable the autozero function. Procedure: • Enter the submenu and then: Fnnd no - filter disabled Fnnd YES - filter enabled Return to weighing: See - 8.2.2. - 20 -
10.4. Tare function This parameters enables users to configure a tare function. Procedure: • Enter the submenu and then: tArA AtAr - automatic tare function on and is stored in balance memory after unplugging it from mains (Description of function operating point 13.6 automatic tare) tArA no - automatic tare function off (user can turn on operating of automatic tare F6 AtAr – till unplugging the balance from mains) tArA tArF - tare memory function – stores last value of tare in balance memory. It is automatically displayed after starting the balance. Value of tare is displayed with minus sign, and there is Net symbol indicated on the display. (user can turn on operating of automatic tare F6 AtAr – till unplugging the balance from mains) Return to weighing: See - 8.2.2. - 21 -
Page 1 and 2: User Manual Pallet truck scales Man
Page 3 and 4: TABLE OF CONTENTS 1. INTENDED USE .
Page 5 and 6: 1. INTENDED USE WWC scales with a h
Page 7 and 8: Measured load should be placed unif
Page 9 and 10: 3. CONDITIONS OF SAFE OPARATION •
Page 11 and 12: 7. INSCRIPTIONS ON THE DISPLAY No T
Page 13 and 14: 8.2. Browsing user menu Use scale
Page 15 and 16: • Using and set the tare value,
Page 17 and 18: Options: A. When the basic unit is
Page 19: Notice: Filtering level influences
Page 23 and 24: Pr_n noStAb - immediate printout (n
Page 25 and 26: Return to weighing: see 8.2.2. 11.4
Page 27 and 28: Return to weighing: See 8.2.2. Noti
Page 29 and 30: * automatic enabling/disabling acco
Page 31 and 32: 12.4.3. Accumulator charging option
Page 33 and 34: 13.2. Selecting quantity of operati
Page 35 and 36: • If option is choosen in the sc
Page 37 and 38: • The inscribed value confirm by
Page 39 and 40: Return to weighing: • Press the k
Page 41 and 42: 13.7. Measurement max force on the
Page 43 and 44: • Take off the load from the pan,
Page 45 and 46: 13.9. Weighing animals Procedure:
Page 47 and 48: • The program goes to displaying
Page 49 and 50: 14. USER CALIBRATION Only for non-v
Page 51 and 52: 14.2. Start mass adjustment If the
Page 53 and 54: 16. COOPERATION WITH COMPUTER Sendi
Page 55 and 56: 17.3. Respond message format After
Page 57 and 58: Frame format: 1 2-3 4 5 6 7-15 16 1
Page 59 and 60: 17.4.8. Switch on continuous transm
Page 61 and 62: Stability character sign mass unit
Page 63 and 64: NULL - Zero value from the AD conve
Page 65: MANUFACTURER OF ELECTRONIC WEIGHING

Manual instruction - Pallet truck scales - Radwag

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?