Manual instruction - Pallet truck scales - Radwag

More documents

Recommendations

Info

• Put a weight of the displayed mass value on the pan and press . The calibration process will start which is signalled by the message: • After completion of the process of calibration the following screen will appear • Take off the weight , then the following sequence of screens will appear • Calibration process can be terminated anytime by pressing which is signalled by the following message on the display: • Return to weighing with saving changes that have been made. Caution: If the calibration process (span adjustment) lasts longer than 15 the message will be displayed and short audible signal will be emitted. Press to perform calibration again with more stable ambient conditions! - 50 -
14.2. Start mass adjustment If the scale does not require the full calibration process sit is possible to adjust only a new start mass. Procedure: • Enter the submenu and then: • The display will show the following information • After the completion of the start mass adjustment the following screen will appear: • The process of start mass adjustment can be terminated by pressing , which is signalled on the display: • Return to weighing performing the procedure of saving parameters. - 51 -
Page 1 and 2: User Manual Pallet truck scales Man
Page 3 and 4: TABLE OF CONTENTS 1. INTENDED USE .
Page 5 and 6: 1. INTENDED USE WWC scales with a h
Page 7 and 8: Measured load should be placed unif
Page 9 and 10: 3. CONDITIONS OF SAFE OPARATION •
Page 11 and 12: 7. INSCRIPTIONS ON THE DISPLAY No T
Page 13 and 14: 8.2. Browsing user menu Use scale
Page 15 and 16: • Using and set the tare value,
Page 17 and 18: Options: A. When the basic unit is
Page 19 and 20: Notice: Filtering level influences
Page 21 and 22: 10.4. Tare function This parameters
Page 23 and 24: Pr_n noStAb - immediate printout (n
Page 25 and 26: Return to weighing: see 8.2.2. 11.4
Page 27 and 28: Return to weighing: See 8.2.2. Noti
Page 29 and 30: * automatic enabling/disabling acco
Page 31 and 32: 12.4.3. Accumulator charging option
Page 33 and 34: 13.2. Selecting quantity of operati
Page 35 and 36: • If option is choosen in the sc
Page 37 and 38: • The inscribed value confirm by
Page 39 and 40: Return to weighing: • Press the k
Page 41 and 42: 13.7. Measurement max force on the
Page 43 and 44: • Take off the load from the pan,
Page 45 and 46: 13.9. Weighing animals Procedure:
Page 47 and 48: • The program goes to displaying
Page 49: 14. USER CALIBRATION Only for non-v
Page 53 and 54: 16. COOPERATION WITH COMPUTER Sendi
Page 55 and 56: 17.3. Respond message format After
Page 57 and 58: Frame format: 1 2-3 4 5 6 7-15 16 1
Page 59 and 60: 17.4.8. Switch on continuous transm
Page 61 and 62: Stability character sign mass unit
Page 63 and 64: NULL - Zero value from the AD conve
Page 65: MANUFACTURER OF ELECTRONIC WEIGHING

Manual instruction - Pallet truck scales - Radwag

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?