Manual instruction - Pallet truck scales - Radwag

2. PRECAUTIONS
2.1. General comments
A. Please, read carefully this user manual before and use the device
according to its intended use.
B. Devices that are to be withdrawn from usage should be sent back to
the producer or in case of own utilization do it according to the law.
2.2. Operation remarks for weighing pallet tracks
During transportation the truck should be placed in upright position with
lowered down and protected against moving. Different positioning of pallet
truck scale can cause creation of air pocketing of hydraulic set. In case of
air pocketing of the hydraulic set, please:
- Place the steering handle in position „ LOWER”,
- Pump with drawbar the hydraulic set,
- During pumping please do not reach the highest and lowest
positions of the beams.
The pallet truck scale is designed for horizontal moving and mass
measuring of loads on smooth, not bumpy, surfaces. Using the pallet
truck scale on bumpy and uneven surfaces may cause premature worn
out of the suspension and wheels of the scale. It also endangers the
mechanical parts of the scale to mechanical, or dynamical overloading
of the load cells.
- 6 -