Manual instruction - Pallet truck scales - Radwag

More documents

Recommendations

Info

13.3. Counting pieces of the same mass Standard solution is equipped with option of counting small pieces of the same mass. It is possible to execute a tare function in this operating mode in order to tare a container value. Notice: 1. Counting pieces does not work together with other scale functions, 2. The counting pieces function is not saved as a default start function so it is not remembered after restarting. Procedure: • Enter to function: • You will see a blinking value of sample quantity. • Press key to start setting quantity of sample, you have a few options to chose from: - 34 -
• If option is choosen in the scale program displays estimated unit mass of the last piece (about 3 sekonds) and then goes to Counting pieces automatically setting the previously displayed value as valid for the procedure. • If the option is selected you will see: • Using and enter the required sample quantity, where: - selection of digit position, - setting the digit, • Confirm the value by pressing , • You will see on the display and then: • If weighing is performed in a container put the container on the pan first and then tare it. Then put the declared quantity of pieces on the pan and confirm it when stable (signalled by ): • The program will automatically calculate the mass of a single piece and go on to the Piece Counting mode (pcs). You will see the following display: - 35 -
Page 1 and 2: User Manual Pallet truck scales Man
Page 3 and 4: TABLE OF CONTENTS 1. INTENDED USE .
Page 5 and 6: 1. INTENDED USE WWC scales with a h
Page 7 and 8: Measured load should be placed unif
Page 9 and 10: 3. CONDITIONS OF SAFE OPARATION •
Page 11 and 12: 7. INSCRIPTIONS ON THE DISPLAY No T
Page 13 and 14: 8.2. Browsing user menu Use scale
Page 15 and 16: • Using and set the tare value,
Page 17 and 18: Options: A. When the basic unit is
Page 19 and 20: Notice: Filtering level influences
Page 21 and 22: 10.4. Tare function This parameters
Page 23 and 24: Pr_n noStAb - immediate printout (n
Page 25 and 26: Return to weighing: see 8.2.2. 11.4
Page 27 and 28: Return to weighing: See 8.2.2. Noti
Page 29 and 30: * automatic enabling/disabling acco
Page 31 and 32: 12.4.3. Accumulator charging option
Page 33: 13.2. Selecting quantity of operati
Page 37 and 38: • The inscribed value confirm by
Page 39 and 40: Return to weighing: • Press the k
Page 41 and 42: 13.7. Measurement max force on the
Page 43 and 44: • Take off the load from the pan,
Page 45 and 46: 13.9. Weighing animals Procedure:
Page 47 and 48: • The program goes to displaying
Page 49 and 50: 14. USER CALIBRATION Only for non-v
Page 51 and 52: 14.2. Start mass adjustment If the
Page 53 and 54: 16. COOPERATION WITH COMPUTER Sendi
Page 55 and 56: 17.3. Respond message format After
Page 57 and 58: Frame format: 1 2-3 4 5 6 7-15 16 1
Page 59 and 60: 17.4.8. Switch on continuous transm
Page 61 and 62: Stability character sign mass unit
Page 63 and 64: NULL - Zero value from the AD conve
Page 65: MANUFACTURER OF ELECTRONIC WEIGHING

Manual instruction - Pallet truck scales - Radwag

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?