ACG HF Multi ISO RFID Reader - RFID Webshop

ACG HF Multi ISO RFID Reader V1.0
13.6 Using a DESFire card
13.6.1 Create a plain standard data file
After activation, application 0 is selected automatically. Default access rights of
application 0 require a login to create an application. The following example
illustrates the successful creation of a plain standard data file.
Command
s
f1200000000000000000000000000
0000000000
Answer
04E10E00000000
activate card
L
login to application 0
f06050000100F01 00
create application with ID 000010
f0408000010 00
select application with ID 000010
f080F0000eeee10000000 00
create plain standard data file
with ID 00
Figure 13-2: Create plain standard data file of a DESFire card
13.6.2 Use a plain standard data file
The next example demonstrates the use of a plain standard data file, such as that
created in the previous example. No login needed since the file is plain.
Command
s
Answer
04E10E00000000
activate card
f0408000010 00
select application with ID 000010
f020D00 00
select file with ID 00
f09160000001122334455 00
write data to standard data file
f051500000010 0011223344550000000000000000000000
read data from standard data file
Figure 13-3: Change data of a plain standard data file
ACG Identification Technologies GmbH 124