ACG HF Multi ISO RFID Reader - RFID Webshop
ACG HF Multi ISO RFID Reader - RFID Webshop
ACG HF Multi ISO RFID Reader - RFID Webshop
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ACG</strong> <strong>HF</strong> <strong>Multi</strong> <strong>ISO</strong> <strong>RFID</strong> <strong>Reader</strong> V1.0<br />
12.4.3.14 Antenna power on/off<br />
This command controls the antenna power. It can be used to decrease the power<br />
consumption of the reader.<br />
Command<br />
Command<br />
'pon'<br />
'poff'<br />
Data<br />
Switch reader on<br />
Put reader in standby mode<br />
Answer<br />
Answer<br />
'P'<br />
Description<br />
Positive acknowledge<br />
Example<br />
Command<br />
poff<br />
Description<br />
Put reader in standby mode<br />
12.4.3.14.1 Power off<br />
The reader enters standby mode. Power consumption is decreased. All tags in the<br />
antenna field are powered off and reset. Standby mode is only entered manually.<br />
To switch off the whole unit, pin 16 (Enable) has to be set to logic low.<br />
12.4.3.14.2 Power on<br />
The reader leaves standby mode and is ready for the next command. Sending a tag<br />
command (i.e. select, continuous read) the reader is powered up.<br />
<strong>ACG</strong> Identification Technologies GmbH 79