ACG HF Multi ISO RFID Reader - RFID Webshop
ACG HF Multi ISO RFID Reader - RFID Webshop
ACG HF Multi ISO RFID Reader - RFID Webshop
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ACG</strong> <strong>HF</strong> <strong>Multi</strong> <strong>ISO</strong> <strong>RFID</strong> <strong>Reader</strong> V1.0<br />
12.4.3.22.4 Out of range failure 'R'<br />
The block address of the 'w' command is higher than 40h.<br />
The block address of the 'w' command conflicts with other commands, therefore the<br />
block address has to be limited to 40h.<br />
Use the 'wb' command instead.<br />
12.4.3.23 Write EEPROM<br />
Writes to the internal reader EEPROM. It contains all start-up parameters and the<br />
device ID. Changes to the start-up settings will only go into effect after a reset of the<br />
device.<br />
Command<br />
Command<br />
'wp'<br />
Data<br />
Address (1 byte), valid range 0Ah - EFh<br />
Data (1 byte)<br />
Answer<br />
Answer<br />
Data<br />
'F'<br />
'R'<br />
Description<br />
EEPROM data (1 byte)<br />
Error: Read after write failure<br />
Error: Out of range failure<br />
Example<br />
Command<br />
wp0A01<br />
Description<br />
Set EEPROM address 0A (Station ID) to 01h<br />
12.4.3.23.1 Out of range failure 'R'<br />
The entered address exceeds the address range.<br />
<strong>ACG</strong> Identification Technologies GmbH 89
Change language