ACG HF Multi ISO RFID Reader - RFID Webshop

ACG HF Multi ISO RFID Reader V1.0
12.4.4.2.2 Decrement failure 'F'
This indicates a general failure during the decrement procedure or an inability to read
after the write process.
12.4.4.2.3 No tag error 'N'
The reader does not detect a response from the tag. There is either no tag present or
the tag does not respond to the request.
12.4.4.2.4 Operation mode failure 'O'
The tag is not ISO14443 type A compliant.
12.4.4.3 Copy value block (backup)
Copies a value block to another block of the same sector. A read is done
automatically after the write to ensure data integrity. Used for backup and error
recovery. A previous login is needed to access a block.
Command
Command
'='
Data
Source block (1 byte)
Target block (1 byte)
Answer
Answer
Data
'I'
'F'
'N'
'O'
Description
New value of target block (4 bytes).
Error: value block failure
Error: copy failure
Error: No tag in field
Error: Operation mode failure
Example
Command Description
=0405 Copy value block 4 to block 5
=0506 Copy value block 5 to block 6
ACG Identification Technologies GmbH 94