BARCO PROJECTION SYSTEMS

H
R G B H / C V
69,'(2
9,'(2
SDI IN
SDI OUT
Connections
Straps on module level :
Floating or non-floating input.
R-Y : J3 : strap "yes" : non floating strap "no" : floating
Y : J4 : strap "yes" : non floating strap "no" : floating
B-Y : J5 : strap "yes" : non floating strap "no" : floating
S : J6 : strap "yes" : non floating strap "no" : floating
Non-Floating
Floating
)ORDWLQJÃRUÃQRQÃIORDWLQJÃLQSXW
Factory preset : strap "yes", non floating input
Sync selection.
J8 :
strap "no" : separate sync
strap "yes" : sync on Y.
-
-
-
-
J9 :
strap "yes" : Tri-level sync
strap "no" : normal sync.
Factory preset :
separate sync and
normal sync.
-
-
-
6\QFÃVHOHFWLRQ
6HSDUDWHÃV\QF 6\QFÃRQÃ<
-
1RUP DOÃ6\QF
7ULOHYHOÃ6\QF
RGB3S / RG3sB Input Module.
Connect your RGB signals with Tri-level sync, e.g. a professional
VCR to the RGB 3 level sync input module.
RGB3S/RG3sB analog : 5 x BNC
Red : 0.7 Vpp ± 3 dB
Blue : 0.7 Vpp ± 3 dB
Green : 0.7 Vpp ± 3 dB
1 Vpp ± 3 dB if Tri-level sync on green
Vert. Tri-level sync : 1 Vpp to 4 Vpp ± 3 dB
Hor. Tri-level sync / Composite Tri-level sync:
1 Vpp to 4 Vpp ± 3 dB
All input signals are always 75 ohm terminated, even in the "not
selected" mode.
Input Selection :
Key in the corresponding slot number on the RCU or the local
keypad.
Indication on the Input Slot Menu :
RS232 OUT
RS 232 IN
On
R G B H / C V
Red
PROJECTOR MODE :
GREEN - OPERATION
COMMUNICATION PORT RED - STANDBY
(800-PERIPHERALS) REMOTE
Green
5*%Ã/(9(/Ã6