Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.

More documents

Recommendations

Info

Multi Gas Leak Detector <strong>MGLD.3000</strong> Operating instructions Settings - Settings for multipoint mode Menu entries Warnings / functions Limit value for analysis mode Settings for multipoint mode Volume setting for alarm signal Gas type and leakage unit setting Language setting, dateand time setting Device ready to operate Probe active unlocked Connected to power socket Battery charge status Number of test points This dialogue is used to enter the desired number of test points in a test sequence as a numeric value. Any value between 1 and 30 can be chosen To enter or change the value, enter the change using the numeric keypad. To open the dialog, press the display field for the number of the test points. Entry, e.g. 5 Delete the previous character Confirm, accept entry, and return to the previous menu. Cancel, reset to the original value, and return to the previous menu Limit value of the test point This dialog is used to enter the upper limit value as a numeric value (concentration or leak rate according to settings) for each test point as a numeric value. see menu Settings - Set gas type and leak unit To enter or change the value, enter the change using the numeric keypad. To open the dialogue, touch the display field for the limit value for each test point (point limit). Entry, e.g. 5 Delete the previous character Confirm, accept entry, and return to the previous menu. Cancel, reset to the original value, and return to the previous menu BAL_MGLD3000_20101001_en.doc 38-54
Multi Gas Leak Detector <strong>MGLD.3000</strong> Operating instructions Limit value for the total of all test points This dialogue is used to enter the limit value as a numeric value (concentration or leak rate according to settings) for the sum of all test points. see menu Settings - Set gas type and leak unit To enter or change the value, enter the change using the numeric keypad. To open the dialogue, touch the display field for the limit value for all test points (cumulative limit). Entry, e.g. 15 Delete the previous character Confirm, accept entry, and return to the previous menu. Cancel, reset to the original value, and return to the previous menu Test criteria for multipoint tests Alternately, the following requirements can be set: • Adherence to the configured limit value for each test point (Fail on Point) Activation/deactivation: Touch the "Failed" button to the right of the display field for the limit value for each test point (Point Limit) - depending on the status, the display will change from deactivated (dark blue background) to activated (light blue background) • Adherence to the configured cumulative limit value for all test points (Fail on Total) Activation/deactivation: Touch the "Failed" button to the right of the display field for the limit value for all test points (Total Limit) - depending on the status, the display will change from deactivated (dark blue background) to activated (light blue background) • Adherence to both limit values Both buttons activated. • No test criteria identified Both buttons deactivated. Test designation (ID) setting in multipoint mode In this dialogue you can identify how the test designation (ID) should be made in the multipoint mode: • AUTOID: Automatic assignment of a time stamp as a test ID (format YYYYMMDDHHMMSS) BAL_MGLD3000_20101001_en.doc 39-54
Page 1 and 2: MGLD.3000 OPERATING INSTRUCTIONS 01
Page 3 and 4: Multi Gas Leak Detector MGLD.3000 O
Page 37: Multi Gas Leak Detector MGLD.3000 O
Page 55: Multi Gas Leak Detector MGLD.3000 O

Vulkan Lokring MGLD.3000 Product Manual - Schoonover, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?