Solution 4+4 Installation Manual - Securityhelpdesk.com.au

More documents

Recommendations

Info

30 Solution 4+4 Installation Manual Defaulting The Control Panel If the Solution 4+4 control panel does not have "LOCATION 900" programmed as 15, follow the procedure outlined below to successfully default the control panel back to the factory default settings. How To Default The Control Panel 1. Disconnect the AC mains supply and the backup battery from the control panel. 2. Hold down and continue to hold down the DEFAULT button located at the top of the printed circuit board. 3. Reconnect the AC mains to the control panel. 4. After reconnecting the AC mains, wait for 3-5 seconds before releasing the DEFAULT button. You will hear the dialler seize relay (RL1) on the control panel click once and two beeps will be heard on the remote codepad. The control panel will now need to be disarmed by using the default Master Code (ie. 2580). The control panel has now been successfully defaulted back to the factory default settings. If you hear the dialler seize relay (RL1) click four times while attempting to default the control panel, this would indicate that the feature of defaulting the control panel has been disabled in “LOCATION 900” on page 29. The control panel will need to be returned to Electronics Design and Manufacturing Pty Limited for exchange where a service fee will be charged to unlock the control panel's memory if the Installer Code is not known. ISSUE123.DOC Electronics Design and Manufacturing Pty Limited
System Indicators and Operations This section includes the following; • System Indicators and Operations • CP5 Eight Zone Codepad • CP5 Eight Zone LCD Codepad • System Operations • Arming The System In AWAY Mode • Disarming The System From AWAY Mode • Arming The System In STAY Mode • Disarming The System From STAY Mode • Codepad Duress Alarm • Codepad Panic Alarm • Codepad Fire Alarm • Codepad Medical Alarm • Isolating Zones • Fault Analysis Mode • Fault Descriptions
Page 1: Solution 4+4 Installation Manual IS
Page 5: Solution 4+4 Installation Manual Co
Page 8 and 9: System Operations _________________
Page 10 and 11: Zone Information___________________
Page 12 and 13: System Options 2___________________
Page 14 and 15: 14 Solution 4+4 Installation Manual
Page 80 and 81:
80 Solution 4+4 Installation Manual
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
100 Solution 4+4 Installation Manua
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
show all

Solution 4+4 Installation Manual - Securityhelpdesk.com.au

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?