Solution 4+4 Installation Manual - Securityhelpdesk.com.au
Solution 4+4 Installation Manual - Securityhelpdesk.com.au
Solution 4+4 Installation Manual - Securityhelpdesk.com.au
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
System Functions 51<br />
7<br />
Turning Telephone Monitor Mode On/Off<br />
Telephone monitor mode allows the remote codepad to be used for a visual representation of<br />
data transmissions between the control panel and the base station receiver. The dialling<br />
sequence is also shown in this mode.<br />
The codepad will beep once every two seconds while telephone monitor mode is turned on<br />
regardless of whether the system is in Installer's Programming Mode or normal operating<br />
mode. The first five indicators are used to display the progressive steps for a transmission to<br />
the base station receiver.<br />
Zone Indicator<br />
Dialling Event<br />
1 Telephone Line Seized<br />
2 Dialling Phone Number<br />
3 Handshake Received<br />
4 Data Is Being Transmitted<br />
5 Kiss-Off Received<br />
None Telephone Line Released<br />
Table 23: Telephone Monitor Mode Indications<br />
How To Turn Telephone Monitor Mode On<br />
1. Enter your followed by 7 and the button.<br />
Three beeps will be heard.<br />
How To Turn Telephone Monitor Mode Off<br />
+ 7 +<br />
1. Enter your followed by 7 and the button.<br />
Two beeps will be heard.<br />
+ 7 +<br />
8<br />
9<br />
Reserved<br />
Send Test Report<br />
This function will force the control panel to send a test report which is used to test the dialling<br />
and reporting capabilities of the system without c<strong>au</strong>sing the sirens to sound.<br />
How To Initiate A Test Report<br />
1. Enter your followed by 9 and the button.<br />
Three beeps will be heard.<br />
+ 9 +<br />
Electronics Design and Manufacturing Pty Limited<br />
ISSUE123.DOC
Change language