02.07.2014 Views

Owner's Manual Cadillac BLS - IFS Europe BV

Owner's Manual Cadillac BLS - IFS Europe BV

Owner's Manual Cadillac BLS - IFS Europe BV

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

460_OM_MY09.book Page 221 Wednesday, April 2, 2008 10:32 AM<br />

Car care<br />

221<br />

IB4529<br />

Jacking points for a trolley jack Plastic covers and removal tool Clean any rust or dirt from the contact surfaces<br />

between the wheel and brake disc<br />

3 Wind the jack up to a suitable height<br />

before placing it under the jacking point.<br />

Each jacking point is indicated by an<br />

arrow on the sill (see illustration).<br />

Make sure that the jack fully engages<br />

the jacking point in the underside of the<br />

sill member and that the entire foot of the<br />

jack is steady and flat on the ground.<br />

The jack must not stand on snow, ice or<br />

similar.<br />

Wind up the jack until it just begins to lift<br />

the car.<br />

4 Wind the jack to raise the wheel clear of<br />

the ground. Remove the wheel bolts and<br />

lift off the wheel.<br />

5 Clean any rust or dirt from the contact<br />

surfaces between the wheel and brake<br />

disc. Do not wipe away the grease in the<br />

wheel hub.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!