You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
zRegistering the priority face (Selected-face Memory)<br />
Normally the camera automatically selects the face to focus on according to the [Face<br />
Detection] setting, but you can also select and register a face to be given priority.<br />
Table of<br />
contents<br />
Face Priority Frame Off<br />
1Press z on the control button during Face Detection. The leftmost face is registered as<br />
the priority face, and the frame changes from to an orange frame ( ).<br />
2Each time you press z, the priority face moves one face to the right. Press z repeatedly<br />
until the orange frame ( ) is on the face you want to register.<br />
3To cancel the face registration (Off), move the orange frame to the rightmost face, then<br />
press z again.<br />
• When you remove the battery from the camera, the face registration is reset.<br />
• When the registered face disappears from the LCD screen, the camera returns to the setting selected<br />
by [Face Detection]. When the registered face is shown on the LCD screen again, the camera<br />
focuses on the registered face.<br />
• It may not be possible to detect the registered face correctly depending on the surrounding<br />
brightness, the subject’s hairstyle, etc. In this case, register the face again under the conditions<br />
where the image will be shot.<br />
• When the Smile Shutter function is used with the Face Detection frame registered, Smile Detection<br />
is performed only on the registered face.<br />
• In Easy Shooting mode, the priority face cannot be registered.<br />
Operation<br />
Search<br />
MENU/Settings<br />
Search<br />
Index<br />
62 GB