BlueMod+P2x/HDP - Stollmann
BlueMod+P2x/HDP - Stollmann
BlueMod+P2x/HDP - Stollmann
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>BlueMod+P2x</strong>/<strong>HDP</strong><br />
Configuration Reference<br />
4.5 SPP General Identifier<br />
This chapter lists all general Serial Port Profile (SPP) related identifier.<br />
SPPSINT<br />
SPP Sniff Interval<br />
Syntax:<br />
Identifier type:<br />
sppsint | sppsint=<br />
configuration | source<br />
This parameter defines the sniff interval (in 0.625 millisecond slots) for SPP<br />
connections. If this parameter is set to a value other than zero, the local device will<br />
request to set the Bluetooth connection to sniff mode with the defined value.<br />
Please be aware that this parameter does not grant that the addressed Bluetooth<br />
connection will go to sniff mode with the value requested.<br />
Legal values are in the range of 6 to 1104 slots.<br />
Value<br />
Description<br />
0 No sniff requested<br />
6-1104 Sniff requested<br />
Example:<br />
sppsint=100<br />
A sniff interval of 62.5 milliseconds will be requested<br />
Note: This parameter is only available on targets that supports SPP and Bluetooth<br />
sniff.<br />
Release r01 www.stollmann.de Page 34 of 43