August 2006 Vol. 23, No. 8 – R/C - RCSoaring.com
August 2006 Vol. 23, No. 8 – R/C - RCSoaring.com
August 2006 Vol. 23, No. 8 – R/C - RCSoaring.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Left: Grooves are milled in the table for vacuum channels. Right: 1/4" thick door skin plywood with appropriately spaced holes is used<br />
for a sacrificial tabletop. Foamular 400 foam is used for female vacuum beds. Vertical fin cavities are pictured.<br />
Left: Registration of foam beds is assured with the use of 1/64" plywood and 1/4" OD brass tubes. The plywood is held in place with<br />
permanent contact-spray glue.<br />
Right: Close-up of plywood registration disk.<br />
<strong>August</strong> <strong>2006</strong> 17